release v4.1-10

build/linux/Documentation/ABI/testing/ima_policy

@@ -20,17 +20,19 @@ Description:
 		action: measure | dont_measure | appraise | dont_appraise | audit
 		condition:= base | lsm  [option]
 			base:	[[func=] [mask=] [fsmagic=] [fsuuid=] [uid=]
-				 [fowner]]
+				[euid=] [fowner=]]
 			lsm:	[[subj_user=] [subj_role=] [subj_type=]
 				 [obj_user=] [obj_role=] [obj_type=]]
 			option:	[[appraise_type=]] [permit_directio]
 
 		base: 	func:= [BPRM_CHECK][MMAP_CHECK][FILE_CHECK][MODULE_CHECK]
 				[FIRMWARE_CHECK]
-			mask:= [MAY_READ] [MAY_WRITE] [MAY_APPEND] [MAY_EXEC]
+			mask:= [[^]MAY_READ] [[^]MAY_WRITE] [[^]MAY_APPEND]
+			       [[^]MAY_EXEC]
 			fsmagic:= hex value
 			fsuuid:= file system UUID (e.g 8bcbe394-4f13-4144-be8e-5aa9ea2ce2f6)
 			uid:= decimal value
+			euid:= decimal value
 			fowner:=decimal value
 		lsm:  	are LSM specific
 		option:	appraise_type:= [imasig]
@@ -49,11 +51,25 @@ Description:
 			dont_measure fsmagic=0x01021994
 			dont_appraise fsmagic=0x01021994
 			# RAMFS_MAGIC
-			dont_measure fsmagic=0x858458f6
 			dont_appraise fsmagic=0x858458f6
+			# DEVPTS_SUPER_MAGIC
+			dont_measure fsmagic=0x1cd1
+			dont_appraise fsmagic=0x1cd1
+			# BINFMTFS_MAGIC
+			dont_measure fsmagic=0x42494e4d
+			dont_appraise fsmagic=0x42494e4d
 			# SECURITYFS_MAGIC
 			dont_measure fsmagic=0x73636673
 			dont_appraise fsmagic=0x73636673
+			# SELINUX_MAGIC
+			dont_measure fsmagic=0xf97cff8c
+			dont_appraise fsmagic=0xf97cff8c
+			# CGROUP_SUPER_MAGIC
+			dont_measure fsmagic=0x27e0eb
+			dont_appraise fsmagic=0x27e0eb
+			# NSFS_MAGIC
+			dont_measure fsmagic=0x6e736673
+			dont_appraise fsmagic=0x6e736673
 
 			measure func=BPRM_CHECK
 			measure func=FILE_MMAP mask=MAY_EXEC
@@ -70,10 +86,6 @@ Description:
 		Examples of LSM specific definitions:
 
 		SELinux:
-			# SELINUX_MAGIC
-			dont_measure fsmagic=0xf97cff8c
-			dont_appraise fsmagic=0xf97cff8c
-
 			dont_measure obj_type=var_log_t
 			dont_appraise obj_type=var_log_t
 			dont_measure obj_type=auditd_log_t

build/linux/Documentation/ABI/testing/sysfs-ata

@@ -90,6 +90,17 @@ gscr
 	130:	SATA_PMP_GSCR_SII_GPIO
 	Only valid if the device is a PM.
 
+trim
+
+	Shows the DSM TRIM mode currently used by the device. Valid
+	values are:
+	unsupported:		Drive does not support DSM TRIM
+	unqueued:		Drive supports unqueued DSM TRIM only
+	queued:			Drive supports queued DSM TRIM
+	forced_unqueued:	Drive's unqueued DSM support is known to be
+				buggy and only unqueued TRIM commands
+				are sent
+
 spdn_cnt
 
 	Number of time libata decided to lower the speed of link due to errors.

build/linux/Documentation/ABI/testing/sysfs-bus-iio

@@ -1165,10 +1165,8 @@ Description:
 		object is near the sensor, usually be observing
 		reflectivity of infrared or ultrasound emitted.
 		Often these sensors are unit less and as such conversion
-		to SI units is not possible.  Where it is, the units should
-		be meters.  If such a conversion is not possible, the reported
-		values should behave in the same way as a distance, i.e. lower
-		values indicate something is closer to the sensor.
+		to SI units is not possible. Higher proximity measurements
+		indicate closer objects, and vice versa.
 
 What:		/sys/.../iio:deviceX/in_illuminance_input
 What:		/sys/.../iio:deviceX/in_illuminance_raw

build/linux/Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt

@@ -92,5 +92,5 @@ mpp61         61       gpo, dev(wen1), uart1(txd), audio(rclk)
 mpp62         62       gpio, dev(a2), uart1(cts), tdm(drx), pcie(clkreq0),
                        audio(mclk), uart0(cts)
 mpp63         63       gpo, spi0(sck), tclk
-mpp64         64       gpio, spi0(miso), spi0-1(cs1)
-mpp65         65       gpio, spi0(mosi), spi0-1(cs2)
+mpp64         64       gpio, spi0(miso), spi0(cs1)
+mpp65         65       gpio, spi0(mosi), spi0(cs2)

build/linux/Documentation/devicetree/bindings/pinctrl/marvell,armada-375-pinctrl.txt

@@ -22,8 +22,8 @@ mpp5          5        gpio, dev(ad7), spi0(cs2), spi1(cs2)
 mpp6          6        gpio, dev(ad0), led(p1), audio(rclk)
 mpp7          7        gpio, dev(ad1), ptp(clk), led(p2), audio(extclk)
 mpp8          8        gpio, dev (bootcs), spi0(cs0), spi1(cs0)
-mpp9          9        gpio, nf(wen), spi0(sck), spi1(sck)
-mpp10        10        gpio, nf(ren), dram(vttctrl), led(c1)
+mpp9          9        gpio, spi0(sck), spi1(sck), nand(we)
+mpp10        10        gpio, dram(vttctrl), led(c1), nand(re)
 mpp11        11        gpio, dev(a0), led(c2), audio(sdo)
 mpp12        12        gpio, dev(a1), audio(bclk)
 mpp13        13        gpio, dev(readyn), pcie0(rstoutn), pcie1(rstoutn)

build/linux/Documentation/devicetree/bindings/pinctrl/marvell,armada-38x-pinctrl.txt

@@ -27,15 +27,15 @@ mpp8          8        gpio, ge0(txd1), dev(ad10)
 mpp9          9        gpio, ge0(txd2), dev(ad11)
 mpp10         10       gpio, ge0(txd3), dev(ad12)
 mpp11         11       gpio, ge0(txctl), dev(ad13)
-mpp12         12       gpio, ge0(rxd0), pcie0(rstout), pcie1(rstout) [1], spi0(cs1), dev(ad14)
-mpp13         13       gpio, ge0(rxd1), pcie0(clkreq), pcie1(clkreq) [1], spi0(cs2), dev(ad15)
-mpp14         14       gpio, ge0(rxd2), ptp(clk), m(vtt_ctrl), spi0(cs3), dev(wen1)
-mpp15         15       gpio, ge0(rxd3), ge(mdc slave), pcie0(rstout), spi0(mosi), pcie1(rstout) [1]
-mpp16         16       gpio, ge0(rxctl), ge(mdio slave), m(decc_err), spi0(miso), pcie0(clkreq)
+mpp12         12       gpio, ge0(rxd0), pcie0(rstout), spi0(cs1), dev(ad14), pcie3(clkreq)
+mpp13         13       gpio, ge0(rxd1), pcie0(clkreq), pcie1(clkreq) [1], spi0(cs2), dev(ad15), pcie2(clkreq)
+mpp14         14       gpio, ge0(rxd2), ptp(clk), m(vtt_ctrl), spi0(cs3), dev(wen1), pcie3(clkreq)
+mpp15         15       gpio, ge0(rxd3), ge(mdc slave), pcie0(rstout), spi0(mosi)
+mpp16         16       gpio, ge0(rxctl), ge(mdio slave), m(decc_err), spi0(miso), pcie0(clkreq), pcie1(clkreq) [1]
 mpp17         17       gpio, ge0(rxclk), ptp(clk), ua1(rxd), spi0(sck), sata1(prsnt)
-mpp18         18       gpio, ge0(rxerr), ptp(trig_gen), ua1(txd), spi0(cs0), pcie1(rstout) [1]
-mpp19         19       gpio, ge0(col), ptp(event_req), pcie0(clkreq), sata1(prsnt), ua0(cts)
-mpp20         20       gpio, ge0(txclk), ptp(clk), pcie1(rstout) [1], sata0(prsnt), ua0(rts)
+mpp18         18       gpio, ge0(rxerr), ptp(trig_gen), ua1(txd), spi0(cs0)
+mpp19         19       gpio, ge0(col), ptp(event_req), ge0(txerr), sata1(prsnt), ua0(cts)
+mpp20         20       gpio, ge0(txclk), ptp(clk), sata0(prsnt), ua0(rts)
 mpp21         21       gpio, spi0(cs1), ge1(rxd0), sata0(prsnt), sd0(cmd), dev(bootcs)
 mpp22         22       gpio, spi0(mosi), dev(ad0)
 mpp23         23       gpio, spi0(sck), dev(ad2)
@@ -58,23 +58,23 @@ mpp39         39       gpio, i2c1(sck), ge1(rxd2), ua0(cts), sd0(d1), dev(a2)
 mpp40         40       gpio, i2c1(sda), ge1(rxd3), ua0(rts), sd0(d2), dev(ad6)
 mpp41         41       gpio, ua1(rxd), ge1(rxctl), ua0(cts), spi1(cs3), dev(burst/last)
 mpp42         42       gpio, ua1(txd), ua0(rts), dev(ad7)
-mpp43         43       gpio, pcie0(clkreq), m(vtt_ctrl), m(decc_err), pcie0(rstout), dev(clkout)
-mpp44         44       gpio, sata0(prsnt), sata1(prsnt), sata2(prsnt) [2], sata3(prsnt) [3], pcie0(rstout)
-mpp45         45       gpio, ref(clk_out0), pcie0(rstout), pcie1(rstout) [1], pcie2(rstout), pcie3(rstout)
-mpp46         46       gpio, ref(clk_out1), pcie0(rstout), pcie1(rstout) [1], pcie2(rstout), pcie3(rstout)
-mpp47         47       gpio, sata0(prsnt), sata1(prsnt), sata2(prsnt) [2], spi1(cs2), sata3(prsnt) [2]
-mpp48         48       gpio, sata0(prsnt), m(vtt_ctrl), tdm2c(pclk), audio(mclk), sd0(d4)
-mpp49         49       gpio, sata2(prsnt) [2], sata3(prsnt) [2], tdm2c(fsync), audio(lrclk), sd0(d5)
-mpp50         50       gpio, pcie0(rstout), pcie1(rstout) [1], tdm2c(drx), audio(extclk), sd0(cmd)
+mpp43         43       gpio, pcie0(clkreq), m(vtt_ctrl), m(decc_err), spi1(cs2), dev(clkout)
+mpp44         44       gpio, sata0(prsnt), sata1(prsnt), sata2(prsnt) [2], sata3(prsnt) [3]
+mpp45         45       gpio, ref(clk_out0), pcie0(rstout)
+mpp46         46       gpio, ref(clk_out1), pcie0(rstout)
+mpp47         47       gpio, sata0(prsnt), sata1(prsnt), sata2(prsnt) [2], sata3(prsnt) [2]
+mpp48         48       gpio, sata0(prsnt), m(vtt_ctrl), tdm2c(pclk), audio(mclk), sd0(d4), pcie0(clkreq)
+mpp49         49       gpio, sata2(prsnt) [2], sata3(prsnt) [2], tdm2c(fsync), audio(lrclk), sd0(d5), pcie1(clkreq)
+mpp50         50       gpio, pcie0(rstout), tdm2c(drx), audio(extclk), sd0(cmd)
 mpp51         51       gpio, tdm2c(dtx), audio(sdo), m(decc_err)
-mpp52         52       gpio, pcie0(rstout), pcie1(rstout) [1], tdm2c(intn), audio(sdi), sd0(d6)
+mpp52         52       gpio, pcie0(rstout), tdm2c(intn), audio(sdi), sd0(d6)
 mpp53         53       gpio, sata1(prsnt), sata0(prsnt), tdm2c(rstn), audio(bclk), sd0(d7)
-mpp54         54       gpio, sata0(prsnt), sata1(prsnt), pcie0(rstout), pcie1(rstout) [1], sd0(d3)
+mpp54         54       gpio, sata0(prsnt), sata1(prsnt), pcie0(rstout), ge0(txerr), sd0(d3)
 mpp55         55       gpio, ua1(cts), ge(mdio), pcie1(clkreq) [1], spi1(cs1), sd0(d0)
 mpp56         56       gpio, ua1(rts), ge(mdc), m(decc_err), spi1(mosi)
 mpp57         57       gpio, spi1(sck), sd0(clk)
 mpp58         58       gpio, pcie1(clkreq) [1], i2c1(sck), pcie2(clkreq), spi1(miso), sd0(d1)
-mpp59         59       gpio, pcie0(rstout), i2c1(sda), pcie1(rstout) [1], spi1(cs0), sd0(d2)
+mpp59         59       gpio, pcie0(rstout), i2c1(sda), spi1(cs0), sd0(d2)
 
 [1]: only available on 88F6820 and 88F6828
 [2]: only available on 88F6828

build/linux/Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt

@@ -42,37 +42,34 @@ mpp20         20       gpio, ge0(rxd4), ge1(rxd2), lcd(d20), ptp(clk)
 mpp21         21       gpio, ge0(rxd5), ge1(rxd3), lcd(d21), mem(bat)
 mpp22         22       gpio, ge0(rxd6), ge1(rxctl), lcd(d22), sata0(prsnt)
 mpp23         23       gpio, ge0(rxd7), ge1(rxclk), lcd(d23), sata1(prsnt)
-mpp24         24       gpio, lcd(hsync), sata1(prsnt), nf(bootcs-re), tdm(rst)
-mpp25         25       gpio, lcd(vsync), sata0(prsnt), nf(bootcs-we), tdm(pclk)
-mpp26         26       gpio, lcd(clk), tdm(fsync), vdd(cpu1-pd)
+mpp24         24       gpio, lcd(hsync), sata1(prsnt), tdm(rst)
+mpp25         25       gpio, lcd(vsync), sata0(prsnt), tdm(pclk)
+mpp26         26       gpio, lcd(clk), tdm(fsync)
 mpp27         27       gpio, lcd(e), tdm(dtx), ptp(trig)
 mpp28         28       gpio, lcd(pwm), tdm(drx), ptp(evreq)
-mpp29         29       gpio, lcd(ref-clk), tdm(int0), ptp(clk), vdd(cpu0-pd)
+mpp29         29       gpio, lcd(ref-clk), tdm(int0), ptp(clk)
 mpp30         30       gpio, tdm(int1), sd0(clk)
-mpp31         31       gpio, tdm(int2), sd0(cmd), vdd(cpu0-pd)
-mpp32         32       gpio, tdm(int3), sd0(d0), vdd(cpu1-pd)
+mpp31         31       gpio, tdm(int2), sd0(cmd)
+mpp32         32       gpio, tdm(int3), sd0(d0)
 mpp33         33       gpio, tdm(int4), sd0(d1), mem(bat)
 mpp34         34       gpio, tdm(int5), sd0(d2), sata0(prsnt)
 mpp35         35       gpio, tdm(int6), sd0(d3), sata1(prsnt)
 mpp36         36       gpio, spi(mosi)
 mpp37         37       gpio, spi(miso)
 mpp38         38       gpio, spi(sck)
 mpp39         39       gpio, spi(cs0)
-mpp40         40       gpio, spi(cs1), uart2(cts), lcd(vga-hsync), vdd(cpu1-pd),
-                       pcie(clkreq0)
+mpp40         40       gpio, spi(cs1), uart2(cts), lcd(vga-hsync), pcie(clkreq0)
 mpp41         41       gpio, spi(cs2), uart2(rts), lcd(vga-vsync), sata1(prsnt),
                        pcie(clkreq1)
-mpp42         42       gpio, uart2(rxd), uart0(cts), tdm(int7), tdm-1(timer),
-                       vdd(cpu0-pd)
-mpp43         43       gpio, uart2(txd), uart0(rts), spi(cs3), pcie(rstout),
-                       vdd(cpu2-3-pd){1}
+mpp42         42       gpio, uart2(rxd), uart0(cts), tdm(int7), tdm-1(timer)
+mpp43         43       gpio, uart2(txd), uart0(rts), spi(cs3), pcie(rstout)
 mpp44         44       gpio, uart2(cts), uart3(rxd), spi(cs4), pcie(clkreq2),
                        mem(bat)
 mpp45         45       gpio, uart2(rts), uart3(txd), spi(cs5), sata1(prsnt)
 mpp46         46       gpio, uart3(rts), uart1(rts), spi(cs6), sata0(prsnt)
 mpp47         47       gpio, uart3(cts), uart1(cts), spi(cs7), pcie(clkreq3),
                        ref(clkout)
-mpp48         48       gpio, tclk, dev(burst/last)
+mpp48         48       gpio, dev(clkout), dev(burst/last)
 
 * Marvell Armada XP (mv78260 and mv78460 only)
 
@@ -84,9 +81,9 @@ mpp51         51       gpio, dev(ad16)
 mpp52         52       gpio, dev(ad17)
 mpp53         53       gpio, dev(ad18)
 mpp54         54       gpio, dev(ad19)
-mpp55         55       gpio, dev(ad20), vdd(cpu0-pd)
-mpp56         56       gpio, dev(ad21), vdd(cpu1-pd)
-mpp57         57       gpio, dev(ad22), vdd(cpu2-3-pd){1}
+mpp55         55       gpio, dev(ad20)
+mpp56         56       gpio, dev(ad21)
+mpp57         57       gpio, dev(ad22)
 mpp58         58       gpio, dev(ad23)
 mpp59         59       gpio, dev(ad24)
 mpp60         60       gpio, dev(ad25)
@@ -96,6 +93,3 @@ mpp63         63       gpio, dev(ad28)
 mpp64         64       gpio, dev(ad29)
 mpp65         65       gpio, dev(ad30)
 mpp66         66       gpio, dev(ad31)
-
-Notes:
-* {1} vdd(cpu2-3-pd) only available on mv78460.

build/linux/Documentation/devicetree/bindings/usb/atmel-usb.txt

@@ -60,9 +60,9 @@ Atmel High-Speed USB device controller
 
 Required properties:
  - compatible: Should be one of the following
-	       "at91sam9rl-udc"
-	       "at91sam9g45-udc"
-	       "sama5d3-udc"
+	       "atmel,at91sam9rl-udc"
+	       "atmel,at91sam9g45-udc"
+	       "atmel,sama5d3-udc"
  - reg: Address and length of the register set for the device
  - interrupts: Should contain usba interrupt
  - ep childnode: To specify the number of endpoints and their properties.

build/linux/Documentation/kernel-parameters.txt

@@ -1398,7 +1398,15 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			The list of supported hash algorithms is defined
 			in crypto/hash_info.h.
 
-	ima_tcb		[IMA]
+	ima_policy=	[IMA]
+			The builtin measurement policy to load during IMA
+			setup.  Specyfing "tcb" as the value, measures all
+			programs exec'd, files mmap'd for exec, and all files
+			opened with the read mode bit set by either the
+			effective uid (euid=0) or uid=0.
+			Format: "tcb"
+
+	ima_tcb		[IMA] Deprecated.  Use ima_policy= instead.
 			Load a policy which meets the needs of the Trusted
 			Computing Base.  This means IMA will measure all
 			programs exec'd, files mmap'd for exec, and all files

build/linux/Makefile

@@ -1,6 +1,6 @@
 VERSION = 4
 PATCHLEVEL = 1
-SUBLEVEL = 3
+SUBLEVEL = 4
 EXTRAVERSION =
 NAME = Series 4800
 

build/linux/arch/arm/boot/dts/at91-sama5d4ek.dts

@@ -108,8 +108,8 @@
 			mmc0: mmc@f8000000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
-				slot@1 {
-					reg = <1>;
+				slot@0 {
+					reg = <0>;
 					bus-width = <4>;
 					cd-gpios = <&pioE 5 0>;
 				};

build/linux/arch/arm/boot/dts/at91sam9g45.dtsi

@@ -1148,7 +1148,7 @@
 			usb2: gadget@fff78000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "atmel,at91sam9rl-udc";
+				compatible = "atmel,at91sam9g45-udc";
 				reg = <0x00600000 0x80000
 				       0xfff78000 0x400>;
 				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;

build/linux/arch/arm/boot/dts/at91sam9x5.dtsi

@@ -1062,7 +1062,7 @@
 			usb2: gadget@f803c000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "atmel,at91sam9rl-udc";
+				compatible = "atmel,at91sam9g45-udc";
 				reg = <0x00500000 0x80000
 				       0xf803c000 0x400>;
 				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;

build/linux/arch/arm/boot/dts/imx23.dtsi

@@ -435,6 +435,7 @@
 				interrupts = <36 37 38 39 40 41 42 43 44>;
 				status = "disabled";
 				clocks = <&clks 26>;
+				#io-channel-cells = <1>;
 			};
 
 			spdif@80054000 {

build/linux/arch/arm/boot/dts/sama5d3.dtsi

@@ -1321,7 +1321,7 @@
 		usb0: gadget@00500000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			compatible = "atmel,at91sam9rl-udc";
+			compatible = "atmel,sama5d3-udc";
 			reg = <0x00500000 0x100000
 			       0xf8030000 0x4000>;
 			interrupts = <33 IRQ_TYPE_LEVEL_HIGH 2>;

build/linux/arch/arm/boot/dts/sama5d4.dtsi

@@ -123,7 +123,7 @@
 		usb0: gadget@00400000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			compatible = "atmel,at91sam9rl-udc";
+			compatible = "atmel,sama5d3-udc";
 			reg = <0x00400000 0x100000
 			       0xfc02c000 0x4000>;
 			interrupts = <47 IRQ_TYPE_LEVEL_HIGH 2>;
@@ -1125,10 +1125,10 @@
 				compatible = "atmel,at91sam9g46-aes";
 				reg = <0xfc044000 0x100>;
 				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
-				dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
-					AT91_XDMAC_DT_PERID(41)>,
-				       <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
-					AT91_XDMAC_DT_PERID(40)>;
+				dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(41))>,
+				       <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(40))>;
 				dma-names = "tx", "rx";
 				clocks = <&aes_clk>;
 				clock-names = "aes_clk";
@@ -1139,10 +1139,10 @@
 				compatible = "atmel,at91sam9g46-tdes";
 				reg = <0xfc04c000 0x100>;
 				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 0>;
-				dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
-					AT91_XDMAC_DT_PERID(42)>,
-				       <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
-					AT91_XDMAC_DT_PERID(43)>;
+				dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(42))>,
+				       <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(43))>;
 				dma-names = "tx", "rx";
 				clocks = <&tdes_clk>;
 				clock-names = "tdes_clk";
@@ -1153,8 +1153,8 @@
 				compatible = "atmel,at91sam9g46-sha";
 				reg = <0xfc050000 0x100>;
 				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 0>;
-				dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
-					AT91_XDMAC_DT_PERID(44)>;
+				dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(44))>;
 				dma-names = "tx";
 				clocks = <&sha_clk>;
 				clock-names = "sha_clk";

build/linux/arch/arm/kernel/smp.c

@@ -576,7 +576,7 @@ void handle_IPI(int ipinr, struct pt_regs *regs)
 	struct pt_regs *old_regs = set_irq_regs(regs);
 
 	if ((unsigned)ipinr < NR_IPI) {
-		trace_ipi_entry(ipi_types[ipinr]);
+		trace_ipi_entry_rcuidle(ipi_types[ipinr]);
 		__inc_irq_stat(cpu, ipi_irqs[ipinr]);
 	}
 
@@ -635,7 +635,7 @@ void handle_IPI(int ipinr, struct pt_regs *regs)
 	}
 
 	if ((unsigned)ipinr < NR_IPI)
-		trace_ipi_exit(ipi_types[ipinr]);
+		trace_ipi_exit_rcuidle(ipi_types[ipinr]);
 	set_irq_regs(old_regs);
 }