Skip to content

Commit

Permalink
[sonic_y_cable]: Decorate all method for mux simulator (sonic-net#181)
Browse files Browse the repository at this point in the history 
Testbeds using the mux simulator will see lots of error messages in the syslog since many y_cable methods are not mocked for the mux simulator. This PR prepares `y_cable.py` to use mocked methods that will be introduced in a future sonic-mgmt PR.

Signed-off-by: Lawrence Lee <lawlee@microsoft.com>
  • Loading branch information
@theasianpianist
theasianpianist authored Mar 30, 2021
1 parent fa02416 commit cc162d6
Showing 1 changed file with 24 additions and 0 deletions.
24 changes: 24 additions & 0 deletions sonic_y_cable/y_cable.py
View file
Original file line number Diff line number Diff line change
Expand Up @@ -602,6 +602,7 @@ def check_if_link_is_active_for_torB(physical_port):
return False


@hook_y_cable_simulator
def enable_prbs_mode(physical_port, target, mode_value, lane_map):
"""
This API specifically configures and enables the PRBS mode/type depending upon the mode_value the user provides.
Expand Down Expand Up @@ -674,6 +675,7 @@ def enable_prbs_mode(physical_port, target, mode_value, lane_map):
return result


@hook_y_cable_simulator
def disable_prbs_mode(physical_port, target):
"""
This API specifically disables the PRBS mode on the physcial port.
Expand Down Expand Up @@ -724,6 +726,7 @@ def disable_prbs_mode(physical_port, target):
return result


@hook_y_cable_simulator
def enable_loopback_mode(physical_port, target, lane_map):
"""
This API specifically configures and enables the Loopback mode on the port user provides.
Expand Down Expand Up @@ -781,6 +784,7 @@ def enable_loopback_mode(physical_port, target, lane_map):
return result


@hook_y_cable_simulator
def disable_loopback_mode(physical_port, target):
"""
This API specifically disables the Loopback mode on the port user provides.
Expand Down Expand Up @@ -834,6 +838,7 @@ def disable_loopback_mode(physical_port, target):
return result


@hook_y_cable_simulator
def get_ber_info(physical_port, target):
"""
This API specifically returns the BER (Bit error rate) value for a specfic port.
Expand Down Expand Up @@ -912,6 +917,7 @@ def get_ber_info(physical_port, target):
return ber_result


@hook_y_cable_simulator
def get_eye_info(physical_port, target):
"""
This API specifically returns the EYE height value for a specfic port.
Expand Down Expand Up @@ -989,6 +995,7 @@ def get_eye_info(physical_port, target):
return eye_result


@hook_y_cable_simulator
def get_part_number(physical_port):
"""
This API specifically returns the part number of the Y cable for a specfic port.
Expand All @@ -1015,6 +1022,7 @@ def get_part_number(physical_port):
return part_number


@hook_y_cable_simulator
def get_vendor(physical_port):
"""
This API specifically returns the vendor name of the Y cable for a specfic port.
Expand All @@ -1041,6 +1049,7 @@ def get_vendor(physical_port):
return vendor_name


@hook_y_cable_simulator
def get_switch_count(physical_port, count_type):
"""
This API specifically returns the switch count to change the Active TOR which has
Expand Down Expand Up @@ -1089,6 +1098,7 @@ def get_switch_count(physical_port, count_type):
return count


@hook_y_cable_simulator
def get_target_cursor_values(physical_port, lane, target):
"""
This API specifically returns the cursor equalization parameters for a target(NIC, TOR1, TOR2).
Expand Down Expand Up @@ -1145,6 +1155,7 @@ def get_target_cursor_values(physical_port, lane, target):
return result


@hook_y_cable_simulator
def check_if_nic_lanes_active(physical_port):
"""
This API specifically returns the byte value which denotes which nic lanes
Expand Down Expand Up @@ -1175,6 +1186,7 @@ def check_if_nic_lanes_active(physical_port):
return result


@hook_y_cable_simulator
def get_firmware_version(physical_port, target):

data = bytearray(FIRMWARE_INFO_PAYLOAD_SIZE)
Expand Down Expand Up @@ -1226,6 +1238,7 @@ def get_firmware_version(physical_port, target):
return result


@hook_y_cable_simulator
def get_internal_voltage_temp(physical_port):

curr_offset = OFFSET_INTERNAL_TEMPERATURE
Expand All @@ -1250,6 +1263,7 @@ def get_internal_voltage_temp(physical_port):
return temp, voltage


@hook_y_cable_simulator
def get_nic_voltage_temp(physical_port):

curr_offset = OFFSET_NIC_TEMPERATURE
Expand All @@ -1274,6 +1288,7 @@ def get_nic_voltage_temp(physical_port):
return temp, voltage


@hook_y_cable_simulator
def get_local_temperature(physical_port):

curr_offset = OFFSET_INTERNAL_TEMPERATURE
Expand All @@ -1289,6 +1304,7 @@ def get_local_temperature(physical_port):
return temp


@hook_y_cable_simulator
def get_local_voltage(physical_port):

if platform_chassis is not None:
Expand All @@ -1308,6 +1324,7 @@ def get_local_voltage(physical_port):
return voltage


@hook_y_cable_simulator
def get_nic_temperature(physical_port):

curr_offset = OFFSET_NIC_TEMPERATURE
Expand All @@ -1323,6 +1340,7 @@ def get_nic_temperature(physical_port):
return temp


@hook_y_cable_simulator
def get_nic_voltage(physical_port):

curr_offset = OFFSET_NIC_VOLTAGE
Expand All @@ -1342,6 +1360,7 @@ def get_nic_voltage(physical_port):
return voltage


@hook_y_cable_simulator
def download_firmware(physical_port, fwfile):
""" This routine should download and store the firmware on all the
components of the Y cable of the port specified.
Expand Down Expand Up @@ -1371,6 +1390,7 @@ def download_firmware(physical_port, fwfile):
return FIRMWARE_DOWNLOAD_SUCCESS


@hook_y_cable_simulator
def activate_firmware(physical_port):
""" This routine should activate the downloaded firmware on all the
components of the Y cable of the port specified.
Expand All @@ -1392,6 +1412,7 @@ def activate_firmware(physical_port):
return FIRMWARE_ACTIVATE_SUCCESS


@hook_y_cable_simulator
def rollback_firmware(physical_port):
""" This routine should rollback the firmware to the previous version
which was being used by the cable. This API is intended to be called when the
Expand All @@ -1410,6 +1431,7 @@ def rollback_firmware(physical_port):
return FIRMWARE_ROLLBACK_SUCCESS


@hook_y_cable_simulator
def set_switching_mode(physical_port, mode):
"""
This API specifically enables the auto switching or manual switching feature on the muxcable,
Expand Down Expand Up @@ -1456,6 +1478,8 @@ def set_switching_mode(physical_port, mode):

return result


@hook_y_cable_simulator
def get_switching_mode(physical_port):
"""
This API specifically returns which type of switching mode the cable is set to auto/manual
Expand Down

0 comments on commit cc162d6

Please sign in to comment.