Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

rpi 3.18.y-rebase and Kernel compile with touchscreen #793

Closed
MrChristo59 opened this issue Feb 4, 2015 · 13 comments
Closed

rpi 3.18.y-rebase and Kernel compile with touchscreen #793

MrChristo59 opened this issue Feb 4, 2015 · 13 comments

Comments

@MrChristo59
Copy link

Hello all,
I have recompiled the new kernel for rasp 2 with the eGalax driver enables in menuconfig.
But rasbian won't load, I get the 4 color wallpaper...
Is their something different to do for the new pi ?

@popcornmix
Copy link
Collaborator

Did you use the right config? Start with:
ARCH=arm make bcm2709_defconfig

@MrChristo59
Copy link
Author

Yes I did, everything went well.

@popcornmix
Copy link
Collaborator

Did you replace kernel7.img (rather than kernel.img?)

@MrChristo59
Copy link
Author

Oh dear, i'm such a mess.
I did replace kernel7.img but didn't understand why there was a "7" so i renamed it...
I think it will work better now.

Thanks for your help and your good work

@MrChristo59
Copy link
Author

Actually, that didn't fix the problem...
Does the "./imagetool-uncompressed.py" need to be update to create the kernel7.img ?

@popcornmix
Copy link
Collaborator

No, just renaming Image or zImage to kernel7.img should be enough.
If you need device tree then you need to run mkknlimg:
https://github.com/raspberrypi/tools/blob/master/mkimage/mkknlimg

but I'd still expect kernel to boot without DT without doing that.

Can you try just building an unchanged kernel with the bcm2709_defconfig and no other changes?

@MrChristo59
Copy link
Author

Ok I try that.

@MrChristo59
Copy link
Author

Compiling...
Here is the code I use to compile kernel, in case you see something
strange. It worked for 3.18.y for the rasp B+.

"
make ARCH=arm CROSS_COMPILE=/usr/bin/arm-linux-gnueabi- bcm2709_defconfig
make ARCH=arm CROSS_COMPILE=/usr/bin/arm-linux-gnueabi- menuconfig // to
enable eGalax driver
make ARCH=arm CROSS_COMPILE=/usr/bin/arm-linux-gnueabi- -k -j6

make modules_install ARCH=arm CROSS_COMPILE=/usr/bin/arm-linux-gnueabi-
INSTALL_MOD_PATH=../modules/

./imagetool-uncompressed.py ../../linux/arch/arm/boot/Image

Then copy kernel.img, modules and firwmare path.
"

Compiled on a Mint distrib

2015-02-04 18:18 GMT+01:00 popcornmix notifications@github.com:

No, just renaming Image or zImage to kernel7.img should be enough.
If you need device tree then you need to run mkknlimg:
https://github.com/raspberrypi/tools/blob/master/mkimage/mkknlimg

but I'd still expect kernel to boot without DT without doing that.

Can you try just building an unchanged kernel with the bcm2709_defconfig
and no other changes?


Reply to this email directly or view it on GitHub
#793 (comment).

@popcornmix
Copy link
Collaborator

Don't use ./imagetool-uncompressed.py
Just copy Image (or zImage for a smaller kernel) to kernel7.img.

@MrChristo59
Copy link
Author

I worked. Sorry you told me that before but I didn't understand.
It runs... But still a problem, when I start x, control are disabled... No
touchscreen and not even usb control (mouse/keyboard).
I guess that's another issue

2015-02-04 18:30 GMT+01:00 popcornmix notifications@github.com:

Don't use ./imagetool-uncompressed.py
Just copy Image (or zImage for a smaller kernel) to kernel7.img.


Reply to this email directly or view it on GitHub
#793 (comment).

@MrChristo59
Copy link
Author

maybe you can help me with that error : libkmod: "ERROR
../libkmod/libkmod.c:554 kmod_search_moddep: could not open moddep file
'/lib/modules/3.18.5-v7/modules.dep.bin'"

2015-02-04 18:53 GMT+01:00 Christopher Coat christo.coat@gmail.com:

I worked. Sorry you told me that before but I didn't understand.
It runs... But still a problem, when I start x, control are disabled... No
touchscreen and not even usb control (mouse/keyboard).
I guess that's another issue

2015-02-04 18:30 GMT+01:00 popcornmix notifications@github.com:

Don't use ./imagetool-uncompressed.py
Just copy Image (or zImage for a smaller kernel) to kernel7.img.


Reply to this email directly or view it on GitHub
#793 (comment).

@popcornmix
Copy link
Collaborator

Looks like you are not setting the modules path. E.g.
make ARCH=arm INSTALL_MOD_PATH=../modules modules_install

@MrChristo59
Copy link
Author

Oh dear, it was simply a copy failure.... Today is not a good day for me...
Anyway it works very well and I want to thank you a lot.

For the people who come here and want to make it works.
Simply use my kernel and modules for 3.18.5-rebase :
https://1fichier.com/?7uwem02si9

2015-02-04 20:06 GMT+01:00 popcornmix notifications@github.com:

Looks like you are not setting the modules path. E.g.
make ARCH=arm INSTALL_MOD_PATH=../modules modules_install


Reply to this email directly or view it on GitHub
#793 (comment).

popcornmix pushed a commit that referenced this issue Sep 8, 2021
… different parents

[ Upstream commit 3f79f6f ]

Cross-rename lacks a check when that would prevent exchanging a
directory and subvolume from different parent subvolume. This causes
data inconsistencies and is caught before commit by tree-checker,
turning the filesystem to read-only.

Calling the renameat2 with RENAME_EXCHANGE flags like

  renameat2(AT_FDCWD, namesrc, AT_FDCWD, namedest, (1 << 1))

on two paths:

  namesrc = dir1/subvol1/dir2
 namedest = subvol2/subvol3

will cause key order problem with following write time tree-checker
report:

  [1194842.307890] BTRFS critical (device loop1): corrupt leaf: root=5 block=27574272 slot=10 ino=258, invalid previous key objectid, have 257 expect 258
  [1194842.322221] BTRFS info (device loop1): leaf 27574272 gen 8 total ptrs 11 free space 15444 owner 5
  [1194842.331562] BTRFS info (device loop1): refs 2 lock_owner 0 current 26561
  [1194842.338772]        item 0 key (256 1 0) itemoff 16123 itemsize 160
  [1194842.338793]                inode generation 3 size 16 mode 40755
  [1194842.338801]        item 1 key (256 12 256) itemoff 16111 itemsize 12
  [1194842.338809]        item 2 key (256 84 2248503653) itemoff 16077 itemsize 34
  [1194842.338817]                dir oid 258 type 2
  [1194842.338823]        item 3 key (256 84 2363071922) itemoff 16043 itemsize 34
  [1194842.338830]                dir oid 257 type 2
  [1194842.338836]        item 4 key (256 96 2) itemoff 16009 itemsize 34
  [1194842.338843]        item 5 key (256 96 3) itemoff 15975 itemsize 34
  [1194842.338852]        item 6 key (257 1 0) itemoff 15815 itemsize 160
  [1194842.338863]                inode generation 6 size 8 mode 40755
  [1194842.338869]        item 7 key (257 12 256) itemoff 15801 itemsize 14
  [1194842.338876]        item 8 key (257 84 2505409169) itemoff 15767 itemsize 34
  [1194842.338883]                dir oid 256 type 2
  [1194842.338888]        item 9 key (257 96 2) itemoff 15733 itemsize 34
  [1194842.338895]        item 10 key (258 12 256) itemoff 15719 itemsize 14
  [1194842.339163] BTRFS error (device loop1): block=27574272 write time tree block corruption detected
  [1194842.339245] ------------[ cut here ]------------
  [1194842.443422] WARNING: CPU: 6 PID: 26561 at fs/btrfs/disk-io.c:449 csum_one_extent_buffer+0xed/0x100 [btrfs]
  [1194842.511863] CPU: 6 PID: 26561 Comm: kworker/u17:2 Not tainted 5.14.0-rc3-git+ #793
  [1194842.511870] Hardware name: empty empty/S3993, BIOS PAQEX0-3 02/24/2008
  [1194842.511876] Workqueue: btrfs-worker-high btrfs_work_helper [btrfs]
  [1194842.511976] RIP: 0010:csum_one_extent_buffer+0xed/0x100 [btrfs]
  [1194842.512068] RSP: 0018:ffffa2c284d77da0 EFLAGS: 00010282
  [1194842.512074] RAX: 0000000000000000 RBX: 0000000000001000 RCX: ffff928867bd9978
  [1194842.512078] RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff928867bd9970
  [1194842.512081] RBP: ffff92876b958000 R08: 0000000000000001 R09: 00000000000c0003
  [1194842.512085] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
  [1194842.512088] R13: ffff92875f989f98 R14: 0000000000000000 R15: 0000000000000000
  [1194842.512092] FS:  0000000000000000(0000) GS:ffff928867a00000(0000) knlGS:0000000000000000
  [1194842.512095] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [1194842.512099] CR2: 000055f5384da1f0 CR3: 0000000102fe4000 CR4: 00000000000006e0
  [1194842.512103] Call Trace:
  [1194842.512128]  ? run_one_async_free+0x10/0x10 [btrfs]
  [1194842.631729]  btree_csum_one_bio+0x1ac/0x1d0 [btrfs]
  [1194842.631837]  run_one_async_start+0x18/0x30 [btrfs]
  [1194842.631938]  btrfs_work_helper+0xd5/0x1d0 [btrfs]
  [1194842.647482]  process_one_work+0x262/0x5e0
  [1194842.647520]  worker_thread+0x4c/0x320
  [1194842.655935]  ? process_one_work+0x5e0/0x5e0
  [1194842.655946]  kthread+0x135/0x160
  [1194842.655953]  ? set_kthread_struct+0x40/0x40
  [1194842.655965]  ret_from_fork+0x1f/0x30
  [1194842.672465] irq event stamp: 1729
  [1194842.672469] hardirqs last  enabled at (1735): [<ffffffffbd1104f5>] console_trylock_spinning+0x185/0x1a0
  [1194842.672477] hardirqs last disabled at (1740): [<ffffffffbd1104cc>] console_trylock_spinning+0x15c/0x1a0
  [1194842.672482] softirqs last  enabled at (1666): [<ffffffffbdc002e1>] __do_softirq+0x2e1/0x50a
  [1194842.672491] softirqs last disabled at (1651): [<ffffffffbd08aab7>] __irq_exit_rcu+0xa7/0xd0

The corrupted data will not be written, and filesystem can be unmounted
and mounted again (all changes since the last commit will be lost).

Add the missing check for new_ino so that all non-subvolumes must reside
under the same parent subvolume. There's an exception allowing to
exchange two subvolumes from any parents as the directory representing a
subvolume is only a logical link and does not have any other structures
related to the parent subvolume, unlike files, directories etc, that
are always in the inode namespace of the parent subvolume.

Fixes: cdd1fed ("btrfs: add support for RENAME_EXCHANGE and RENAME_WHITEOUT")
CC: stable@vger.kernel.org # 4.7+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
popcornmix pushed a commit that referenced this issue Sep 8, 2021
… different parents

[ Upstream commit 3f79f6f ]

Cross-rename lacks a check when that would prevent exchanging a
directory and subvolume from different parent subvolume. This causes
data inconsistencies and is caught before commit by tree-checker,
turning the filesystem to read-only.

Calling the renameat2 with RENAME_EXCHANGE flags like

  renameat2(AT_FDCWD, namesrc, AT_FDCWD, namedest, (1 << 1))

on two paths:

  namesrc = dir1/subvol1/dir2
 namedest = subvol2/subvol3

will cause key order problem with following write time tree-checker
report:

  [1194842.307890] BTRFS critical (device loop1): corrupt leaf: root=5 block=27574272 slot=10 ino=258, invalid previous key objectid, have 257 expect 258
  [1194842.322221] BTRFS info (device loop1): leaf 27574272 gen 8 total ptrs 11 free space 15444 owner 5
  [1194842.331562] BTRFS info (device loop1): refs 2 lock_owner 0 current 26561
  [1194842.338772]        item 0 key (256 1 0) itemoff 16123 itemsize 160
  [1194842.338793]                inode generation 3 size 16 mode 40755
  [1194842.338801]        item 1 key (256 12 256) itemoff 16111 itemsize 12
  [1194842.338809]        item 2 key (256 84 2248503653) itemoff 16077 itemsize 34
  [1194842.338817]                dir oid 258 type 2
  [1194842.338823]        item 3 key (256 84 2363071922) itemoff 16043 itemsize 34
  [1194842.338830]                dir oid 257 type 2
  [1194842.338836]        item 4 key (256 96 2) itemoff 16009 itemsize 34
  [1194842.338843]        item 5 key (256 96 3) itemoff 15975 itemsize 34
  [1194842.338852]        item 6 key (257 1 0) itemoff 15815 itemsize 160
  [1194842.338863]                inode generation 6 size 8 mode 40755
  [1194842.338869]        item 7 key (257 12 256) itemoff 15801 itemsize 14
  [1194842.338876]        item 8 key (257 84 2505409169) itemoff 15767 itemsize 34
  [1194842.338883]                dir oid 256 type 2
  [1194842.338888]        item 9 key (257 96 2) itemoff 15733 itemsize 34
  [1194842.338895]        item 10 key (258 12 256) itemoff 15719 itemsize 14
  [1194842.339163] BTRFS error (device loop1): block=27574272 write time tree block corruption detected
  [1194842.339245] ------------[ cut here ]------------
  [1194842.443422] WARNING: CPU: 6 PID: 26561 at fs/btrfs/disk-io.c:449 csum_one_extent_buffer+0xed/0x100 [btrfs]
  [1194842.511863] CPU: 6 PID: 26561 Comm: kworker/u17:2 Not tainted 5.14.0-rc3-git+ #793
  [1194842.511870] Hardware name: empty empty/S3993, BIOS PAQEX0-3 02/24/2008
  [1194842.511876] Workqueue: btrfs-worker-high btrfs_work_helper [btrfs]
  [1194842.511976] RIP: 0010:csum_one_extent_buffer+0xed/0x100 [btrfs]
  [1194842.512068] RSP: 0018:ffffa2c284d77da0 EFLAGS: 00010282
  [1194842.512074] RAX: 0000000000000000 RBX: 0000000000001000 RCX: ffff928867bd9978
  [1194842.512078] RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff928867bd9970
  [1194842.512081] RBP: ffff92876b958000 R08: 0000000000000001 R09: 00000000000c0003
  [1194842.512085] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
  [1194842.512088] R13: ffff92875f989f98 R14: 0000000000000000 R15: 0000000000000000
  [1194842.512092] FS:  0000000000000000(0000) GS:ffff928867a00000(0000) knlGS:0000000000000000
  [1194842.512095] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [1194842.512099] CR2: 000055f5384da1f0 CR3: 0000000102fe4000 CR4: 00000000000006e0
  [1194842.512103] Call Trace:
  [1194842.512128]  ? run_one_async_free+0x10/0x10 [btrfs]
  [1194842.631729]  btree_csum_one_bio+0x1ac/0x1d0 [btrfs]
  [1194842.631837]  run_one_async_start+0x18/0x30 [btrfs]
  [1194842.631938]  btrfs_work_helper+0xd5/0x1d0 [btrfs]
  [1194842.647482]  process_one_work+0x262/0x5e0
  [1194842.647520]  worker_thread+0x4c/0x320
  [1194842.655935]  ? process_one_work+0x5e0/0x5e0
  [1194842.655946]  kthread+0x135/0x160
  [1194842.655953]  ? set_kthread_struct+0x40/0x40
  [1194842.655965]  ret_from_fork+0x1f/0x30
  [1194842.672465] irq event stamp: 1729
  [1194842.672469] hardirqs last  enabled at (1735): [<ffffffffbd1104f5>] console_trylock_spinning+0x185/0x1a0
  [1194842.672477] hardirqs last disabled at (1740): [<ffffffffbd1104cc>] console_trylock_spinning+0x15c/0x1a0
  [1194842.672482] softirqs last  enabled at (1666): [<ffffffffbdc002e1>] __do_softirq+0x2e1/0x50a
  [1194842.672491] softirqs last disabled at (1651): [<ffffffffbd08aab7>] __irq_exit_rcu+0xa7/0xd0

The corrupted data will not be written, and filesystem can be unmounted
and mounted again (all changes since the last commit will be lost).

Add the missing check for new_ino so that all non-subvolumes must reside
under the same parent subvolume. There's an exception allowing to
exchange two subvolumes from any parents as the directory representing a
subvolume is only a logical link and does not have any other structures
related to the parent subvolume, unlike files, directories etc, that
are always in the inode namespace of the parent subvolume.

Fixes: cdd1fed ("btrfs: add support for RENAME_EXCHANGE and RENAME_WHITEOUT")
CC: stable@vger.kernel.org # 4.7+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
popcornmix pushed a commit that referenced this issue Sep 8, 2021
… different parents

Cross-rename lacks a check when that would prevent exchanging a
directory and subvolume from different parent subvolume. This causes
data inconsistencies and is caught before commit by tree-checker,
turning the filesystem to read-only.

Calling the renameat2 with RENAME_EXCHANGE flags like

  renameat2(AT_FDCWD, namesrc, AT_FDCWD, namedest, (1 << 1))

on two paths:

  namesrc = dir1/subvol1/dir2
 namedest = subvol2/subvol3

will cause key order problem with following write time tree-checker
report:

  [1194842.307890] BTRFS critical (device loop1): corrupt leaf: root=5 block=27574272 slot=10 ino=258, invalid previous key objectid, have 257 expect 258
  [1194842.322221] BTRFS info (device loop1): leaf 27574272 gen 8 total ptrs 11 free space 15444 owner 5
  [1194842.331562] BTRFS info (device loop1): refs 2 lock_owner 0 current 26561
  [1194842.338772]        item 0 key (256 1 0) itemoff 16123 itemsize 160
  [1194842.338793]                inode generation 3 size 16 mode 40755
  [1194842.338801]        item 1 key (256 12 256) itemoff 16111 itemsize 12
  [1194842.338809]        item 2 key (256 84 2248503653) itemoff 16077 itemsize 34
  [1194842.338817]                dir oid 258 type 2
  [1194842.338823]        item 3 key (256 84 2363071922) itemoff 16043 itemsize 34
  [1194842.338830]                dir oid 257 type 2
  [1194842.338836]        item 4 key (256 96 2) itemoff 16009 itemsize 34
  [1194842.338843]        item 5 key (256 96 3) itemoff 15975 itemsize 34
  [1194842.338852]        item 6 key (257 1 0) itemoff 15815 itemsize 160
  [1194842.338863]                inode generation 6 size 8 mode 40755
  [1194842.338869]        item 7 key (257 12 256) itemoff 15801 itemsize 14
  [1194842.338876]        item 8 key (257 84 2505409169) itemoff 15767 itemsize 34
  [1194842.338883]                dir oid 256 type 2
  [1194842.338888]        item 9 key (257 96 2) itemoff 15733 itemsize 34
  [1194842.338895]        item 10 key (258 12 256) itemoff 15719 itemsize 14
  [1194842.339163] BTRFS error (device loop1): block=27574272 write time tree block corruption detected
  [1194842.339245] ------------[ cut here ]------------
  [1194842.443422] WARNING: CPU: 6 PID: 26561 at fs/btrfs/disk-io.c:449 csum_one_extent_buffer+0xed/0x100 [btrfs]
  [1194842.511863] CPU: 6 PID: 26561 Comm: kworker/u17:2 Not tainted 5.14.0-rc3-git+ #793
  [1194842.511870] Hardware name: empty empty/S3993, BIOS PAQEX0-3 02/24/2008
  [1194842.511876] Workqueue: btrfs-worker-high btrfs_work_helper [btrfs]
  [1194842.511976] RIP: 0010:csum_one_extent_buffer+0xed/0x100 [btrfs]
  [1194842.512068] RSP: 0018:ffffa2c284d77da0 EFLAGS: 00010282
  [1194842.512074] RAX: 0000000000000000 RBX: 0000000000001000 RCX: ffff928867bd9978
  [1194842.512078] RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff928867bd9970
  [1194842.512081] RBP: ffff92876b958000 R08: 0000000000000001 R09: 00000000000c0003
  [1194842.512085] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
  [1194842.512088] R13: ffff92875f989f98 R14: 0000000000000000 R15: 0000000000000000
  [1194842.512092] FS:  0000000000000000(0000) GS:ffff928867a00000(0000) knlGS:0000000000000000
  [1194842.512095] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [1194842.512099] CR2: 000055f5384da1f0 CR3: 0000000102fe4000 CR4: 00000000000006e0
  [1194842.512103] Call Trace:
  [1194842.512128]  ? run_one_async_free+0x10/0x10 [btrfs]
  [1194842.631729]  btree_csum_one_bio+0x1ac/0x1d0 [btrfs]
  [1194842.631837]  run_one_async_start+0x18/0x30 [btrfs]
  [1194842.631938]  btrfs_work_helper+0xd5/0x1d0 [btrfs]
  [1194842.647482]  process_one_work+0x262/0x5e0
  [1194842.647520]  worker_thread+0x4c/0x320
  [1194842.655935]  ? process_one_work+0x5e0/0x5e0
  [1194842.655946]  kthread+0x135/0x160
  [1194842.655953]  ? set_kthread_struct+0x40/0x40
  [1194842.655965]  ret_from_fork+0x1f/0x30
  [1194842.672465] irq event stamp: 1729
  [1194842.672469] hardirqs last  enabled at (1735): [<ffffffffbd1104f5>] console_trylock_spinning+0x185/0x1a0
  [1194842.672477] hardirqs last disabled at (1740): [<ffffffffbd1104cc>] console_trylock_spinning+0x15c/0x1a0
  [1194842.672482] softirqs last  enabled at (1666): [<ffffffffbdc002e1>] __do_softirq+0x2e1/0x50a
  [1194842.672491] softirqs last disabled at (1651): [<ffffffffbd08aab7>] __irq_exit_rcu+0xa7/0xd0

The corrupted data will not be written, and filesystem can be unmounted
and mounted again (all changes since the last commit will be lost).

Add the missing check for new_ino so that all non-subvolumes must reside
under the same parent subvolume. There's an exception allowing to
exchange two subvolumes from any parents as the directory representing a
subvolume is only a logical link and does not have any other structures
related to the parent subvolume, unlike files, directories etc, that
are always in the inode namespace of the parent subvolume.

Fixes: cdd1fed ("btrfs: add support for RENAME_EXCHANGE and RENAME_WHITEOUT")
CC: stable@vger.kernel.org # 4.7+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
pfpacket pushed a commit to pfpacket/linux-rpi-rust that referenced this issue Apr 7, 2023
popcornmix pushed a commit that referenced this issue Mar 27, 2024
[ Upstream commit f1d7157 ]

When the generic SCMI code tears down a channel, it calls the chan_free
callback function, defined by each transport. Since multiple protocols
might share the same transport_info member, chan_free() might want to
clean up the same member multiple times within the given SCMI transport
implementation. In this case, it is SMC transport. This will lead to a NULL
pointer dereference at the second time:

    | scmi_protocol scmi_dev.1: Enabled polling mode TX channel - prot_id:16
    | arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
    | arm-scmi firmware:scmi: unable to communicate with SCMI
    | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
    | Mem abort info:
    |   ESR = 0x0000000096000004
    |   EC = 0x25: DABT (current EL), IL = 32 bits
    |   SET = 0, FnV = 0
    |   EA = 0, S1PTW = 0
    |   FSC = 0x04: level 0 translation fault
    | Data abort info:
    |   ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
    |   CM = 0, WnR = 0, TnD = 0, TagAccess = 0
    |   GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
    | user pgtable: 4k pages, 48-bit VAs, pgdp=0000000881ef8000
    | [0000000000000000] pgd=0000000000000000, p4d=0000000000000000
    | Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
    | Modules linked in:
    | CPU: 4 PID: 1 Comm: swapper/0 Not tainted 6.7.0-rc2-00124-g455ef3d016c9-dirty #793
    | Hardware name: FVP Base RevC (DT)
    | pstate: 61400009 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
    | pc : smc_chan_free+0x3c/0x6c
    | lr : smc_chan_free+0x3c/0x6c
    | Call trace:
    |  smc_chan_free+0x3c/0x6c
    |  idr_for_each+0x68/0xf8
    |  scmi_cleanup_channels.isra.0+0x2c/0x58
    |  scmi_probe+0x434/0x734
    |  platform_probe+0x68/0xd8
    |  really_probe+0x110/0x27c
    |  __driver_probe_device+0x78/0x12c
    |  driver_probe_device+0x3c/0x118
    |  __driver_attach+0x74/0x128
    |  bus_for_each_dev+0x78/0xe0
    |  driver_attach+0x24/0x30
    |  bus_add_driver+0xe4/0x1e8
    |  driver_register+0x60/0x128
    |  __platform_driver_register+0x28/0x34
    |  scmi_driver_init+0x84/0xc0
    |  do_one_initcall+0x78/0x33c
    |  kernel_init_freeable+0x2b8/0x51c
    |  kernel_init+0x24/0x130
    |  ret_from_fork+0x10/0x20
    | Code: f0004701 910a0021 aa1403e5 97b91c70 (b9400280)
    | ---[ end trace 0000000000000000 ]---

Simply check for the struct pointer being NULL before trying to access
its members, to avoid this situation.

This was found when a transport doesn't really work (for instance no SMC
service), the probe routines then tries to clean up, and triggers a crash.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Fixes: 1dc6558 ("firmware: arm_scmi: Add smc/hvc transport")
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240126122325.2039669-1-andre.przywara@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
popcornmix pushed a commit that referenced this issue Mar 27, 2024
[ Upstream commit f1d7157 ]

When the generic SCMI code tears down a channel, it calls the chan_free
callback function, defined by each transport. Since multiple protocols
might share the same transport_info member, chan_free() might want to
clean up the same member multiple times within the given SCMI transport
implementation. In this case, it is SMC transport. This will lead to a NULL
pointer dereference at the second time:

    | scmi_protocol scmi_dev.1: Enabled polling mode TX channel - prot_id:16
    | arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
    | arm-scmi firmware:scmi: unable to communicate with SCMI
    | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
    | Mem abort info:
    |   ESR = 0x0000000096000004
    |   EC = 0x25: DABT (current EL), IL = 32 bits
    |   SET = 0, FnV = 0
    |   EA = 0, S1PTW = 0
    |   FSC = 0x04: level 0 translation fault
    | Data abort info:
    |   ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
    |   CM = 0, WnR = 0, TnD = 0, TagAccess = 0
    |   GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
    | user pgtable: 4k pages, 48-bit VAs, pgdp=0000000881ef8000
    | [0000000000000000] pgd=0000000000000000, p4d=0000000000000000
    | Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
    | Modules linked in:
    | CPU: 4 PID: 1 Comm: swapper/0 Not tainted 6.7.0-rc2-00124-g455ef3d016c9-dirty #793
    | Hardware name: FVP Base RevC (DT)
    | pstate: 61400009 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
    | pc : smc_chan_free+0x3c/0x6c
    | lr : smc_chan_free+0x3c/0x6c
    | Call trace:
    |  smc_chan_free+0x3c/0x6c
    |  idr_for_each+0x68/0xf8
    |  scmi_cleanup_channels.isra.0+0x2c/0x58
    |  scmi_probe+0x434/0x734
    |  platform_probe+0x68/0xd8
    |  really_probe+0x110/0x27c
    |  __driver_probe_device+0x78/0x12c
    |  driver_probe_device+0x3c/0x118
    |  __driver_attach+0x74/0x128
    |  bus_for_each_dev+0x78/0xe0
    |  driver_attach+0x24/0x30
    |  bus_add_driver+0xe4/0x1e8
    |  driver_register+0x60/0x128
    |  __platform_driver_register+0x28/0x34
    |  scmi_driver_init+0x84/0xc0
    |  do_one_initcall+0x78/0x33c
    |  kernel_init_freeable+0x2b8/0x51c
    |  kernel_init+0x24/0x130
    |  ret_from_fork+0x10/0x20
    | Code: f0004701 910a0021 aa1403e5 97b91c70 (b9400280)
    | ---[ end trace 0000000000000000 ]---

Simply check for the struct pointer being NULL before trying to access
its members, to avoid this situation.

This was found when a transport doesn't really work (for instance no SMC
service), the probe routines then tries to clean up, and triggers a crash.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Fixes: 1dc6558 ("firmware: arm_scmi: Add smc/hvc transport")
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240126122325.2039669-1-andre.przywara@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
popcornmix pushed a commit that referenced this issue Mar 27, 2024
[ Upstream commit f1d7157 ]

When the generic SCMI code tears down a channel, it calls the chan_free
callback function, defined by each transport. Since multiple protocols
might share the same transport_info member, chan_free() might want to
clean up the same member multiple times within the given SCMI transport
implementation. In this case, it is SMC transport. This will lead to a NULL
pointer dereference at the second time:

    | scmi_protocol scmi_dev.1: Enabled polling mode TX channel - prot_id:16
    | arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
    | arm-scmi firmware:scmi: unable to communicate with SCMI
    | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
    | Mem abort info:
    |   ESR = 0x0000000096000004
    |   EC = 0x25: DABT (current EL), IL = 32 bits
    |   SET = 0, FnV = 0
    |   EA = 0, S1PTW = 0
    |   FSC = 0x04: level 0 translation fault
    | Data abort info:
    |   ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
    |   CM = 0, WnR = 0, TnD = 0, TagAccess = 0
    |   GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
    | user pgtable: 4k pages, 48-bit VAs, pgdp=0000000881ef8000
    | [0000000000000000] pgd=0000000000000000, p4d=0000000000000000
    | Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
    | Modules linked in:
    | CPU: 4 PID: 1 Comm: swapper/0 Not tainted 6.7.0-rc2-00124-g455ef3d016c9-dirty #793
    | Hardware name: FVP Base RevC (DT)
    | pstate: 61400009 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
    | pc : smc_chan_free+0x3c/0x6c
    | lr : smc_chan_free+0x3c/0x6c
    | Call trace:
    |  smc_chan_free+0x3c/0x6c
    |  idr_for_each+0x68/0xf8
    |  scmi_cleanup_channels.isra.0+0x2c/0x58
    |  scmi_probe+0x434/0x734
    |  platform_probe+0x68/0xd8
    |  really_probe+0x110/0x27c
    |  __driver_probe_device+0x78/0x12c
    |  driver_probe_device+0x3c/0x118
    |  __driver_attach+0x74/0x128
    |  bus_for_each_dev+0x78/0xe0
    |  driver_attach+0x24/0x30
    |  bus_add_driver+0xe4/0x1e8
    |  driver_register+0x60/0x128
    |  __platform_driver_register+0x28/0x34
    |  scmi_driver_init+0x84/0xc0
    |  do_one_initcall+0x78/0x33c
    |  kernel_init_freeable+0x2b8/0x51c
    |  kernel_init+0x24/0x130
    |  ret_from_fork+0x10/0x20
    | Code: f0004701 910a0021 aa1403e5 97b91c70 (b9400280)
    | ---[ end trace 0000000000000000 ]---

Simply check for the struct pointer being NULL before trying to access
its members, to avoid this situation.

This was found when a transport doesn't really work (for instance no SMC
service), the probe routines then tries to clean up, and triggers a crash.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Fixes: 1dc6558 ("firmware: arm_scmi: Add smc/hvc transport")
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240126122325.2039669-1-andre.przywara@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

No branches or pull requests

2 participants