Cant start Headphones port in use

[tubbzzzz]

Hi All
I have installed headphones on Windows 8.1 pc
I start it in cmd window but it always says port in use no matter what port I put in config file
Can someone suggest where I am going wrong
Thanks

[toofewacres]

Had similar issues a while back..

Finally figured out the issue I was having. For others that may have similar
issues in the future:

1. run cmd.exe as admin
2. type netsh winsock reset
3. restart computer

Fixed my issue...but was with WIN 7

Good luck.

On July 27, 2015 at 8:43 AM tubbzzzz notifications@github.com wrote:

Hi All
I have installed headphones on Windows 8.1 pc
I start it in cmd window but it always says port in use no matter what port I
put in config file
Can someone suggest where I am going wrong
Thanks

—
Reply to this email directly or view it on GitHub
#2313 .

[tubbzzzz]

Thanks
I will give it a try later on when I get home :)
On 27 Jul 2015 14:22, "toofewacres" notifications@github.com wrote:

Had similar issues a while back..

Finally figured out the issue I was having. For others that may have
similar
issues in the future:

1. run cmd.exe as admin
2. type netsh winsock reset
3. restart computer

Fixed my issue...but was with WIN 7

Good luck.

On July 27, 2015 at 8:43 AM tubbzzzz notifications@github.com wrote:

Hi All
I have installed headphones on Windows 8.1 pc
I start it in cmd window but it always says port in use no matter what
port I
put in config file
Can someone suggest where I am going wrong
Thanks

—
Reply to this email directly or view it on GitHub
#2313 .

—
Reply to this email directly or view it on GitHub
#2313 (comment)
.

[tubbzzzz]

unfortunately this did not solve the problem :(

[thepapanoob]

it even says the error 😅 come on man! look whats listening on port 8181 or change the port in the configfile

[AdeHub]

Still an issue?

[tubbzzzz]

Yes still an issue tried your fix on win 7 and win 10
On 5 Sep 2015 22:06, "AdeHub" notifications@github.com wrote:

Still an issue?

—
Reply to this email directly or view it on GitHub
#2313 (comment)
.

[jLemmings]

Same issue here!

Getting a "Request raise HTTP error with status code 404 (local client error)."

Tried to change the port, but still cant connect from my other PC in the same network...

Any fix?

[basilfx]

@In0cenT the log message is not related. If you just recently installed HP, then check the troubleshooting wiki first. Remote access is disabled by default.

[tubbzzzz]

I have issues with local access
Says port in use regardless of the port I choose
Googled it and seems to be a common issue can't see a fix though :(
On 9 Sep 2015 10:00, "Bas Stottelaar" notifications@github.com wrote:

@In0cenT https://github.com/In0cenT the log message is not related. If
you just recently installed HP, then check the troubleshooting wiki first.
Remote access is disabled by default.

—
Reply to this email directly or view it on GitHub
#2313 (comment)
.