Skip to content

v2.2.0

Latest
Latest
Compare
Choose a tag to compare
@renesas-rzt-fsp-development renesas-rzt-fsp-development released this 20 Nov 01:16
v2.2.0
e66ab13

Release Notes

Flexible Software Package (FSP) for Renesas RZ/T series, version 2.2.0.

Download the FSP with e² studio Installer for this release, setup_rztfsp_v2_2_0_e2s_v2024-10.exe, from here.

If using IAR Embedded Workbench for Arm, download the FSP Smart Configurator for this release, setup_rztfsp_v2_2_0_rzsc_v2024-10.exe, from here.

All installers are available in the Assets section of this release.

Refer to the README.md in the FSP root folder for setup instructions, hardware details, and related links.

Tools

GCC Compiler for Cortex-R52: 12.2.Rel1

GCC Compiler for Cortex-A55: 10.3-2021.07

IAR Embedded Workbench for Arm: 9.60.2

e² studio: 2024-10

SEGGER J-Link: 7.98c

Features Added

  • RZ/T2H MPU support added.
  • RZT2H Evaluation Board support added.
  • Cortex-A55 support and common code for Cortex-A55 and Cortex-R52 support added.
  • DDR memory access support added.
  • Interrupt of CoreLink GIC-600 support added.
  • MMU of Cortex-A55 support added to bsp.
  • Internal Buses Slave Stop Function, TrustZone(TZC-400) and Address Expander support added.
  • TFU Fixed-point support added to bsp.
  • PCLKM support added to CANFD(r_canfd).
  • GPT/MTU3 event selector (GPT_SEL) support added to bsp and ELC(r_elc).
  • Function for simultaneously acquiring Timer0 and 1 support added to Ethernet Switch(r_ethsw).
  • Ethernet driver support added(r_gmac_b).
  • General PWM timer input capture signal select support added to GPT(r_gpt).
  • PCIE Root Complex driver support added(r_pcie_rc).
  • PCIE End Point driver support added(r_pcie_ep).
  • Renesas Secure IP driver support added(r_rsip_protected). Refer to RZ/T2M, T2L, N2L Group Security Solution Package for Renesas Secure IP driver before it was integrated into FSP.
  • Temperature Sensor Unit driver support added(r_tsu_b).
  • OpenAMP framework support added.

Third Party Software

These third party software solutions are included alongside FSP.

FreeRTOS: 202007.00

Bug Fixes and Improvements

  • Removed interrupt enable setting from example code, which is no longer needed due to update startup code in RZT FSP v2.0. (r_dmac, r_icu, r_icu_error, r_wdt, r_doc, r_rtc, r_cmt, r_cmtw, r_sci_uart, r_sci_iic, r_sci_spi, r_spi, r_iic_master, r_canfd)

r_ether_phy

  • Fixed an issue when selecting the option of MDIO type for each device.

r_ether_selector

  • Corrected value of macro "ETHER_SELECTOR_MODCTRL_BIT_SWMODE_MASK" for RZ/T2M.

r_gmac

  • Fixed a bug in WakeOnLAN operation.
  • Fixed PMT interrupt issue.

r_gpt

  • Fixed a bug that event signals generated by other modules via ELC cannot be used to trigger each operation of r_gpt.

r_mtu3

  • Fixed a bug that an error occurred when setting PWM mode of r_mtu3_three_phase and Phase Count of r_mtu3 at the same time.

r_poe3

  • Fixed a bug that an incorrect value is set to a pin select value for MTU0-B/MTU6/MTU7 as MTU3 output pin.
  • Fixed a build error when using DSMIFn_ERR as an additional trigger for r_poe3 module.

r_sci_spi

  • Updated the initialisation flow to split the CCR3 register settings into two stages.

r_spi

  • Added SPI master receive clock, maximum analog delay of its clock, and SPI digital delay settings.

r_usb_basic

  • Fixed module_stop bit control in module_init().

r_xspi_hyper

  • Corrected conditions that cause errors in addressing of the configuration setting.

r_xspi_ospi

  • Corrected conditions that cause errors in addressing of the configuration setting.

r_xspi_qspi

  • Corrected conditions that cause errors in addressing of the configuration setting.

rm_freertos_plus_fat

  • Disabled options not available for Memory Implementation of rm_freertos_plus_fat module in Configuration.
  • Addded a note for debugging on FSP Documentation.

rm_freertos_plus_tcp

  • Addded a note for debugging on FSP Documentation.
  • Corrected a description for Total Number of Sectors in the configuration setting.

rm_freertos_port

  • Addded a note for debugging on FSP Documentation.

rm_ssc_port

  • Added support for ESC_RESETOUT terminal port function number.
  • Fixed build error bug when ETHSW_MDIO is enabled.

BSP tab of FSP Configuration

  • The core item was grayed out on BSP tab because the core cannot be changed after the project is created.

Known Issues

Known issues checks Getting Started document in each product page.

Knowledge Base

Visit our knowledge base for other technical updates.

MD5 Checksums

  • RZT_FSP_Packs_v2.2.0.zip ff8986b03d4b0d5287394981cd6a7692
  • RZT_FSP_Packs_v2.2.0.exe 30ae0946dd01b09a1737bff8f6875ab4
  • fsp_documentation_v2.2.0.zip 83e46cdfbffeb0fc322ddc25b8d949f5
  • setup_rztfsp_v2_2_0_e2s_v2024-10.exe b685394337a4eb0aa1c58d9e30f65dee
  • setup_rztfsp_v2_2_0_rzsc_v2024-10.exe b1be205c749e24a9abe205e5a357a805
Assets 7
Loading