High quality eCAD parts made by me. Shared with you.
KiCad assets for parts I'm using in my designs. These are parts that I couldn't find eCAD resources for on the internet, so I made them by hand.
Most of these parts are available on Digikey. Look for a link to Digikey in the symbol metadata.
KiCad 6.0 and above
- Add symbol to library using eSchema
- Add footprint to
rhinodavid.pretty
directory - Add STEP file to
rhinodavid.pretty
directory- Make sure the 3D model is assigned to and properly positioned on the footprint
- Add images to
./docs/readme/img
- Update
./docs/readme/data.json
with the new part - Regenerate the README
- This requires the Handlebars CLI
- Run
./docs/readme/generate.sh
192x64 OLED display available on eBay and buydisplay.com.
The display is mounted face down and then folded backwards.
Zener Diode 47 V 500 mW ±5% Surface Mount SOD-123.
SK6812MINI Neopixel LED in a 3.5mm x 3.5mm package.
Littelfuse, Inc. Polymeric PTC Resettable Fuse 8V 1.5 A in a SMD 1206 package.
P-Channel SMD MOSFET, 20 V 4A 1W SOT-23F.
1 Channel Schmitt Trigger NAND Gate IC in a 5-X2SON (0.80mm x 0.80mm) package. Great for button debouncing.
6mm SPDT SMD tactile switch. Use with 74AUP1T00GX for a debounce.
4 Position Wire to Board Terminal Block Horizontal 0.1" (2.54mm) Through Hole.
Synchronous Boost DC/DC Converter 3.3 V
Ultra-Low Quiescent Current Synchronous Boost with Integrated LDO/Load Switch
Wurth Electronic IQXO-540 Standard 2 x 1.6 crystal oscillator in a ceramic package with a seam sealed metal lid, hermetically sealed.
Surface Mount WLAN / Bluetooth Chip Antenna (2450MHz)
Vishay General Semiconductor TVS Diode 13.4VC; DO214AA package
Jauch Quartz 32.768 kHz ±20ppm Crystal 7pF 70 kOhms 2-SMD, No Lead
Diodes Inc. N-Channel 20V 300mA (Ta) 350mW (Ta) Surface Mount SOT-23-3 MOSFET
STMicroelectronics Linear Voltage Regulator IC Positive Fixed 1 Output 1.2A SOT-223
Murata Electronics Buzzer Transducer, Externally Driven Piezo 1.5 V - 4kHz 65dB @ 1.5V, 10cm Surface Mount
Tag Connect EdgeConnect 10-pin Castellated Board-Edge Connector
An ARM 10 pin connector with pin definitions for JTAG and SWD
Check your clone to make sure the pinout is the same -- some vary
4-SMD no lead crystal oscillator