Add bftpd test server

FluentFTP.Dockers/Build.bat

@@ -7,4 +7,6 @@ docker build vsftpd -t vsftpd:fluentftp
 
 docker build pyftpdlib -t pyftpdlib:fluentftp
 
+docker build bftpd -t bftpd:fluentftp
+
 pause

FluentFTP.Dockers/Build.sh

@@ -6,3 +6,5 @@ sudo docker build pureftpd -t pureftpd:fluentftp
 sudo docker build vsftpd -t vsftpd:fluentftp
 
 sudo docker build pyftpdlib -t pyftpdlib:fluentftp
+
+sudo docker build bftpd -t bftpd:fluentftp

FluentFTP.Dockers/bftpd/Dockerfile

@@ -0,0 +1,62 @@
+FROM debian:bullseye
+
+MAINTAINER FluentFTP
+LABEL Description="FluentFTP vsftpd docker image based on Debian Bullseye."
+
+RUN echo 'debconf debconf/frontend select Noninteractive' | debconf-set-selections
+
+RUN apt -y update && apt clean all
+
+RUN apt install -y \
+	apt-utils \
+	dialog
+
+RUN apt install -y \
+	iproute2
+
+RUN apt remove --purge -y \
+	exim4-base \
+	mariadb-common
+
+RUN apt autoremove -y
+
+RUN apt install -y  \
+        wget \
+	build-essential
+
+
+RUN mkdir /tmp/bftpd/ && \
+	cd /tmp/bftpd/ && \
+        wget -O bftpd.tar.gz https://downloads.sourceforge.net/project/bftpd/bftpd/bftpd-6.1/bftpd-6.1.tar.gz && \
+        tar -xzf bftpd.tar.gz && \
+        cd bftpd && \
+        ./configure && \
+        make && \
+        make install
+
+RUN apt remove --purge -y \
+        build-essential \
+	wget
+
+RUN apt autoremove -y
+
+COPY bftpd.conf /usr/etc/
+RUN sed -i -e "s/\r//" /usr/etc/bftpd.conf
+COPY run-bftpd.sh /usr/sbin/
+RUN sed -i -e "s/\r//" /usr/sbin/run-bftpd.sh
+
+RUN chmod +x /usr/sbin/run-bftpd.sh
+
+RUN useradd -m -p savatlcb.1m26 fluentuser
+
+RUN mkdir -p /home/fluentuser/
+RUN chown -R fluentuser:users /home/fluentuser
+
+RUN mkdir /var/ftp
+
+VOLUME /home/fluentuser
+VOLUME /var/log/bftpd
+
+EXPOSE 20 21
+
+CMD ["/usr/sbin/run-bftpd.sh"]

FluentFTP.Dockers/bftpd/bftpd.conf

@@ -0,0 +1,321 @@
+#Configuration file for bftpd.
+#The given values are only examples, modify this file for your own needs.
+
+global{
+  #If set to no, access is allowed.
+  #If set to yes, access is denied without giving a reason.
+  #If set to anything else, access is denied giving the content of this
+  #variable as a reason.
+  DENY_LOGIN="no"
+
+  #The port number where the daemon should listen (only for daemon mode)
+  PORT="21"
+
+  #You can force bftpd to use a specific port range in passive mode.
+  #Passive mode means that the client will open data connections
+  #and the server stays 'passive'.
+  #This option can be very useful with some firewall configurations.
+  #Separate values with "," and define ranges with "-".
+  #bftpd will try to bind one of these ports in ascending order as
+  #you specify them here.
+  #If none of the given ports could be bound, the connection is
+  #is refused. If you want to bind any free port in that case, add
+  #"0" to the list.
+  PASSIVE_PORTS="21100-21199"
+
+  #If PORT data connections should be opened from port 20, say yes here. You
+  #will probably need this if your server is behind a firewall that restricts
+  #outgoing packets from ports higher than 1024. Note that this may be a
+  #security hole, as the server can not drop its root privileges completely
+  #if you say yes here.
+  DATAPORT20="yes"
+
+  #The password for the administration commands, encrypted (man mkpasswd).
+  ADMIN_PASS="x"
+
+  #With this option, you can put your entire FTP environment into a chroot
+  #jail. Apart from security, this offers you the possibility of having
+  #virtual users that don't exist in the system.
+  #Additionally, you can make some kind of 'file pool' by creating a directory
+  #with files which you can symlink from the users' homes (this means setting
+  #DO_CHROOT=no in order for the users to be able to access that dir.
+  #Note that you need the following files in your initial chroot directory:
+  #/etc/passwd, /etc/shadow, /etc/group
+  #On GNU systems, you will also need the NSS libraries in /lib.
+  #INITIAL_CHROOT="/ftp"
+
+  #The bftpdutmp file enables you to record user logins and logouts in
+  #bftpd, which is useful for the administration interface (which is not
+  #finished yet). You also need the file to be able to restrict the number
+  #of users simultaneously logged on, and so on.
+  #Note that the directory in which the file resides must already exist.
+  #Set the option to "" if you do not want that. This is discouraged for normal
+  #use, but can be helpful if you want to create a boot floppy or something.
+  PATH_BFTPDUTMP="/var/run/bftpd/bftpdutmp"
+
+  #This option controls the buffer size while transferring files.
+  #If you are on a very fast network (fast meaning 100 Mbit/s or more),
+  #you should set this to 64000 or something like that.
+  #Transferring from localhost to localhost, I had a transfer speed of
+  #approx. 15 MB/s with XFER_BUFSIZE=2048 and a speed of approx. 20 MB/s
+  #with XFER_BUFSIZE=64000. You should not set big values for this if you have
+  #slow (dialup) clients.
+  # This option can also be used to (crudely) throttle back
+  # transfer speeds. Setting this to a very low value
+  # can slow transfer speeds.
+  XFER_BUFSIZE="2048"
+
+
+  # This variable controls whether the transfer buffer (see above option)
+  # should change size as more (or less) clients connect to the server.
+  # Setting this option to "yes" will put more work on your CPU, but
+  # will avoid chewing up as much bandwidth as more people connect.
+  # Setting this option to "no" is easier on the CPU, but may cause
+  # your bandwidth to spike.
+  CHANGE_BUFSIZE="no"
+
+
+
+  # This option allows you to add a delay (in microseconds) to
+  # the time between when one piece of data was sent
+  # and when the next will be sent. This is to aid in
+  # throttling bandwidth and applies to each client. The
+  # throttling effects the DATA transfers only (not control
+  # connections).
+  # A value of zero (0) means there is no added delay.
+  # A value of about 500000 (five hundred thousand) should
+  # delay for about half a second.
+  # These delays should be kept low to avoid triggering
+  # data transfer timeouts.
+  XFER_DELAY="0"
+
+  # This option determines whether hidden files
+  # ( files that start with a "." )
+  # will be shown in a directory listing.
+  # If this option is set to "yes", the client will be
+  # able to see hidden files ONLY if they pass the "-a"
+  # option to the list command. For example "ls -a".
+  # If this option is set to "no", then hidden files are
+  # never shown, regardless of whether "-a" is used.
+  # Additionally, if we want the server to always send hidden
+  # files to the client, whether they request hidden files or
+  # not, set this to "always".
+  SHOW_HIDDEN_FILES="no"
+
+  # This option determines whether files not readable
+  # to the ftp user will be shown in a directory listing.
+  SHOW_NONREADABLE_FILES="no"
+
+  #When set to yes, this option makes the server allow data connections which
+  #don't go to the client who initiated them.
+  #This is needed for FXP.
+  ALLOW_FXP="no"
+
+  #After how many seconds of idle time should a user be kicked from the server?
+  CONTROL_TIMEOUT="300"
+
+  #After how many seconds of idle time should a user be kicked from the server
+  #during a file transfer?
+  DATA_TIMEOUT="30"
+
+  #Use Ratio if you want the client to send a file before he can get a file.
+  #Usage: RATIO=send/receive or RATIO=none. Example: RATIO=2/1 lets the client
+  #receive a 1 MB file when he has sent a 2 MB file.
+  RATIO="none"
+
+  # Use this option to track bandwidth usage. After each session, the server
+  # will log how much data was uploaded and downloaded for each user.
+  # This option should point to the directory where the log files will
+  # be saved.
+  # Each day gets its own log file, to make it easier to rotate logs.
+  # Please note, this directory must be created manually.
+  # BANDWIDTH="/var/log/bftpd"
+
+  #ROOTDIR specifies the root directory of the client. It defaults to %h
+  #(user's home directory). %u is replaced by the user name.
+  ROOTDIR="%h"
+
+  #Umask for the files or directories users create.
+  UMASK="022"
+
+  #Name of the log file. Say "syslog" to log into syslog.
+  #Say "" for no logging.
+  LOGFILE="/var/log/bftpd.log"
+
+  #Use %v for version, %h for the server FQDN and %i for the server IP address.
+  # Note: If you use the "%h" option and you do an initial CHROOT, then
+  # you'll need to copy your /etc/hosts and /etc/host.conf files into
+  # the chroot jail.
+  HELLO_STRING="bftpd %v at %i ready."
+
+  #The server automatically chdirs to the directory given here after login.
+  AUTO_CHDIR="/"
+
+  #Authentication type, values: PAM, PASSWD
+  AUTH="PASSWD"
+
+  # The FILE_AUTH variable over-rides the AUTH value. If the FILE_AUTH
+  # value is set to something other than an empty string ("")
+  # bftpd will search through the pathname given in order
+  # to find username/password matches.
+  # The format of this file is as shown below:
+  # username password group home_folder
+  # (for example:)
+  # robert secret users /home/robert
+  # james moose users /mnt/storage
+  #
+  # A entry with the password field set to * (star) requires
+  # no password. Any password the users enters will be accepted.
+  # The following example is for a user with no password.
+  # anyone * users /home/ftp
+  #
+  # This option should almost never be used and is only for situations
+  # where one (or very few) users need to be granted access to a machine
+  # where normal user accounts cannot be created.
+  # Under no circumstances should anyone except root be
+  # able to read the FILE_AUTH password file.
+  #FILE_AUTH="/etc/ftpdpassword"
+
+
+  #Enable this if you want the client's IP address to be resolved to a host
+  #name. Note that it increases the overhead and it may not work if your DNS
+  #is not configured correctly. Clients without a valid DNS name will take very
+  #long to connect.
+  RESOLVE_CLIENT_IP="no"
+
+  #Path to the message of the day, seen by all users before login.
+  MOTD_GLOBAL="/etc/ftpmotd"
+
+  #Path to the message of the day, seen after login, relative to the root
+  #path of the user (see ROOTDIR).
+  # Use symbols %u and %h in place of user's username and home directory.
+  MOTD_USER="/.ftpmotd"
+
+  #If RESOLVE_UIDS is enabled, in directory lists the user and group names
+  #are shown instead of UID/GID. This may slow down directory listings.
+  RESOLVE_UIDS="yes"
+
+  #If DO_CHROOT is enabled, a user can not access directories other than his
+  #HOMEDIR and its subdirectories. DON'T disable this globally if you don't
+  #want to have a security hole!
+  DO_CHROOT="yes"
+
+  #Enable this to log each login to wtmp.
+  LOG_WTMP="yes"
+
+  #If you want bftpd to bind itself to one specific network interface, enter
+  #its IP address here. Else enter 'any'. This option only works in standalone
+  #mode.
+  BIND_TO_ADDR="any"
+
+
+  # This option allows you to over-ride the IP address Bftpd
+  # sends to the client. This may be useful is you are behind
+  # a router. If an address is given in this option, it over-rides
+  # the LAN IP your PC had. It is recommended you leave this option
+  # commented out unless you have a special setup.
+  #OVERRIDE_IP="127.0.0.1"
+
+
+  #Path to the ftpusers file. It can contain user names that are denied.
+  #If it does not exist, every user can log in. If you don't want this,
+  #just put a nonexistent filename here.
+  PATH_FTPUSERS="/etc/ftpusers"
+
+  #Enable this if you want to deny any user who has a shell which is not in
+  #/etc/shells.
+  AUTH_ETCSHELLS="no"
+
+  #With the option ALLOWCOMMAND_XXXX, you can disable the command XXXX.
+  #For example, if you don't want any user to delete files, you can do
+  #ALLOWCOMMAND_DELE="no"
+  #Of course, you can disable it for specific users by writing the appropriate
+  #lines into the user structures.
+  ALLOWCOMMAND_DELE="yes"
+  ALLOWCOMMAND_STOR="yes"
+  ALLOWCOMMAND_SITE="no"
+
+  #Files that belong to these groups (comma-separated) are hidden in LIST/NLST.
+  HIDE_GROUP=""
+
+  #What message should be used as reply for the QUIT command?
+  QUIT_MSG="See you later..."
+
+  #The number of users that can be logged in at the same time.
+  #If set to "0", an unlimited users will be able to connect. This is not
+  #recommended, as it makes DoS attacks possible, even if the clients are
+  #kicked after a short time.
+  USERLIMIT_GLOBAL="0"
+
+  #This variable controls how often one user can be logged in at one time.
+  #This allows you to have a big connection limit (see above) and nevertheless
+  #prevent single users from having a lot of connections.
+  #This option may also be useful in a user {} or group {} environment.
+  USERLIMIT_SINGLEUSER="0"
+
+  #This variable controls how many users are allowed to connect from the same IP
+  #address. This prvents one user (or machine) from taking all of the avail
+  #connections.
+  #If you want to allow unlimited connections, leave this option as "0".
+  USERLIMIT_HOST="0"
+
+  #This option allows you to force files to be compressed
+  #on the fly during upload. A ".gz" extension will be given
+  #to the file. This should usually be turned off ("no"), but
+  #may be useful to servers with smaller storage space.
+  #To enable this option set the value to "yes".
+  #
+  # To use this option, bftpd must be configured using
+  # "./configure --enable-libz" _before_ running "make".
+  GZ_UPLOAD="no"
+
+  #This option allows you to set whether or not files
+  #with the extension .gz should be uncompressed on-the-fly
+  #during downloads. This should usually be turned off ("no").
+  #To enable this feature, set the value to "yes".
+  #
+  #To use this option, bftpd must be configured using
+  # "./configure --enable-libz" _before_ running "make".
+  GZ_DOWNLOAD="no"
+
+  # This option is enabled when the server should run
+  # a script before writing to the file system. This should
+  # usually be commented out, unless you need to prepare the
+  # file system for writing.
+  # NOTE: Be careful when using this option and the DO_CHROOT option.
+  # The location of the root directory can change when using DO_CHROOT.
+  # The current working directory (cwd) is passed to the script you run.
+  # PRE_WRITE_SCRIPT="/bin/true"
+
+  # This option is enabled when the server should run
+  # a script after writing to the file system. This should
+  # usually be commented out, unless you need to do something
+  # to the file system after writing.
+  # NOTE: Be careful when using this option and the DO_CHROOT option.
+  # The location of the root directory can change when using DO_CHROOT.
+  # The current working directory (cwd) is passed to the script you run.
+  # POST_WRITE_SCRIPT="/bin/false"
+
+  # The GNU C library makes some assumptions about the local time zone
+  # when run in a chroot environment. The Bftpd server tries to work
+  # around these assumptions to give the correct time. If we are
+  # running in an environment which does not require the time zone
+  # fix, set TIMEZONE_FIX to "no".
+  # TIMEZONE_FIX="no"
+}
+
+user ftp {
+  #Any password fits.
+  ANONYMOUS_USER="yes"
+  DENY_LOGIN="Anonymous login disabled."
+  #ROOTDIR="/path/for/anonymous/user"
+}
+
+user anonymous {
+  #If the client wants anonymous, ftp is taken instead.
+  ALIAS="ftp"
+}
+
+user root {
+  DENY_LOGIN="Root login not allowed."
+}