-
Notifications
You must be signed in to change notification settings - Fork 9
Plastic filament extruder (typically ABS & PLA, 1.75mm & 3mm diameter) for Portabee and Durbie printers. Geared NEMA17-based filament drive, M4 toothed insert. Largely compatible with most other RepRap printers (check design before use).
romscraj/romscraj-extruder
Folders and files
| Name | Name | Last commit message | Last commit date | |
|---|---|---|---|---|
Repository files navigation
- Assembly Instructions, which include the RP parts BOM as well as the non-RP parts BOM can be found in the download section: https://github.com/romscraj/romscraj-extruder/downloads - Refer to heater-block.jpg, hot-end-nozzle.jpg, slidemount-plate.jpg and insulator-barrel.jpg for dimension drawings for the hot-end components that require machining. - Sketchup .skp design files can be found in the 'SKP-files' folder. - If you need any specific part that is difficult to source (and you do not wish to modify the design to accomodate alternatives), our romscraj store has portabee specific parts that you can purchase (if you don't see the part that you need, drop us an email at romscraj@orangeknob.com): http://romscraj.com/carttoo/ You can also refer to the RepRap Buyers' Guide which is a good compilation of sources from which you can consider to obtain your parts from: http://reprap.org/wiki/RepRap_Buyers'_Guide - Happy building!
About
Plastic filament extruder (typically ABS & PLA, 1.75mm & 3mm diameter) for Portabee and Durbie printers. Geared NEMA17-based filament drive, M4 toothed insert. Largely compatible with most other RepRap printers (check design before use).
Resources
Stars
Watchers
Forks
Releases
No releases published
Packages 0
No packages published