Skip to content

Slicer module that can interface directly with ROS 2 using ROS parameters, topics, tf...

License

Notifications You must be signed in to change notification settings

rosmed/slicer_ros2_module

Repository files navigation

Introduction

This module is designed to enable direct communication between ROS 2 and 3D Slicer.

The documentation is available on readthedocs: https://slicer-ros2.readthedocs.io/en/latest/index.html

Please check out this video below for an overview of some of the features and use-cases.

Acknowledgement

This project is supported by:

  • The National Institute of Biomedical Imaging and Bioengineering of the U.S. National Institutes of Health (NIH) under award number R01EB020667, and 3R01EB020667-05S1 (MPI: Tokuda, Krieger, Leonard, and Fuge). The content is solely the responsibility of the authors and does not necessarily represent the official views of the NIH.
  • The National Sciences and Engineering Research Council of Canada and the Canadian Institutes of Health Research.

References

If you use SlicerROS2 and find it helpful for your research, please use the 2024 publication for citation:

@article{connolly2024slicerros2,
  title={SlicerROS2: A Research and Development Module for Image-Guided Robotic Interventions},
  author={Connolly, Laura and Kumar, Aravind S and Mehta, Kapi Ketan and Al-Zogbi, Lidia and Kazanzides, Peter and Mousavi, Parvin and Fichtinger, Gabor and Krieger, Axel and Tokuda, Junichi and Taylor, Russell H and others},
  journal={IEEE Transactions on Medical Robotics and Bionics},
  year={2024},
  publisher={IEEE}
}

About

Slicer module that can interface directly with ROS 2 using ROS parameters, topics, tf...

Resources

License

Stars

Watchers

Forks

Packages

No packages published