Revert stabilization of #![feature(target_feature_11)]

compiler/rustc_codegen_ssa/src/codegen_attrs.rs

@@ -224,23 +224,34 @@ fn codegen_fn_attrs(tcx: TyCtxt<'_>, did: DefId) -> CodegenFnAttrs {
             if !tcx.is_closure(did.to_def_id())
                 && tcx.fn_sig(did).skip_binder().unsafety() == hir::Unsafety::Normal
             {
-                // The `#[target_feature]` attribute is allowed on
-                // WebAssembly targets on all functions, including safe
-                // ones. Other targets have conditions on the usage of
-                // `#[target_feature]` because on most targets
-                // execution of instructions that are not supported is
-                // considered undefined behavior. For WebAssembly which is a
-                // 100% safe target at execution time it's not possible to
-                // execute undefined instructions, and even if a future
-                // feature was added in some form for this it would be a
-                // deterministic trap. There is no undefined behavior when
-                // executing WebAssembly so `#[target_feature]` is allowed
-                // on safe functions (but again, only for WebAssembly)
-                //
-                // Note that this is also allowed if `actually_rustdoc` so
-                // if a target is documenting some wasm-specific code then
-                // it's not spuriously denied.
-                if !(tcx.sess.target.is_like_wasm || tcx.sess.opts.actually_rustdoc) {
+                if tcx.sess.target.is_like_wasm || tcx.sess.opts.actually_rustdoc {
+                    // The `#[target_feature]` attribute is allowed on
+                    // WebAssembly targets on all functions, including safe
+                    // ones. Other targets require that `#[target_feature]` is
+                    // only applied to unsafe functions (pending the
+                    // `target_feature_11` feature) because on most targets
+                    // execution of instructions that are not supported is
+                    // considered undefined behavior. For WebAssembly which is a
+                    // 100% safe target at execution time it's not possible to
+                    // execute undefined instructions, and even if a future
+                    // feature was added in some form for this it would be a
+                    // deterministic trap. There is no undefined behavior when
+                    // executing WebAssembly so `#[target_feature]` is allowed
+                    // on safe functions (but again, only for WebAssembly)
+                    //
+                    // Note that this is also allowed if `actually_rustdoc` so
+                    // if a target is documenting some wasm-specific code then
+                    // it's not spuriously denied.
+                } else if !tcx.features().target_feature_11 {
+                    let mut err = feature_err(
+                        &tcx.sess.parse_sess,
+                        sym::target_feature_11,
+                        attr.span,
+                        "`#[target_feature(..)]` can only be applied to `unsafe` functions",
+                    );
+                    err.span_label(tcx.def_span(did), "not an `unsafe` function");
+                    err.emit();
+                } else {
                     check_target_feature_trait_unsafe(tcx, did, attr.span);
                 }
             }
@@ -467,7 +478,7 @@ fn codegen_fn_attrs(tcx: TyCtxt<'_>, did: DefId) -> CodegenFnAttrs {
     });
 
     // #73631: closures inherit `#[target_feature]` annotations
-    if tcx.is_closure(did.to_def_id()) {
+    if tcx.features().target_feature_11 && tcx.is_closure(did.to_def_id()) {
         let owner_id = tcx.parent(did.to_def_id());
         if tcx.def_kind(owner_id).has_codegen_attrs() {
             codegen_fn_attrs

compiler/rustc_feature/src/accepted.rs

@@ -314,8 +314,6 @@ declare_features! (
     (accepted, struct_variant, "1.0.0", None, None),
     /// Allows `#[target_feature(...)]`.
     (accepted, target_feature, "1.27.0", None, None),
-    /// Allows the use of `#[target_feature]` on safe functions.
-    (accepted, target_feature_11, "CURRENT_RUSTC_VERSION", Some(69098), None),
     /// Allows `fn main()` with return types which implements `Termination` (RFC 1937).
     (accepted, termination_trait, "1.26.0", Some(43301), None),
     /// Allows `#[test]` functions where the return type implements `Termination` (RFC 1937).

compiler/rustc_feature/src/active.rs

@@ -510,6 +510,8 @@ declare_features! (
     (active, strict_provenance, "1.61.0", Some(95228), None),
     /// Allows string patterns to dereference values to match them.
     (active, string_deref_patterns, "1.67.0", Some(87121), None),
+    /// Allows the use of `#[target_feature]` on safe functions.
+    (active, target_feature_11, "1.45.0", Some(69098), None),
     /// Allows using `#[thread_local]` on `static` items.
     (active, thread_local, "1.0.0", Some(29594), None),
     /// Allows defining `trait X = A + B;` alias items.

library/core/src/lib.rs

@@ -233,6 +233,7 @@
 #![feature(simd_ffi)]
 #![feature(staged_api)]
 #![feature(stmt_expr_attributes)]
+#![feature(target_feature_11)]
 #![feature(trait_alias)]
 #![feature(transparent_unions)]
 #![feature(try_blocks)]

tests/mir-opt/inline/inline_compatibility.inlined_no_sanitize.Inline.diff

@@ -4,14 +4,14 @@
   fn inlined_no_sanitize() -> () {
       let mut _0: ();                      // return place in scope 0 at $DIR/inline_compatibility.rs:+0:37: +0:37
       let _1: ();                          // in scope 0 at $DIR/inline_compatibility.rs:+1:5: +1:18
-+     scope 1 (inlined no_sanitize) {      // at $DIR/inline_compatibility.rs:23:5: 23:18
++     scope 1 (inlined no_sanitize) {      // at $DIR/inline_compatibility.rs:24:5: 24:18
 +     }
 
       bb0: {
           StorageLive(_1);                 // scope 0 at $DIR/inline_compatibility.rs:+1:5: +1:18
 -         _1 = no_sanitize() -> bb1;       // scope 0 at $DIR/inline_compatibility.rs:+1:5: +1:18
 -                                          // mir::Constant
--                                          // + span: $DIR/inline_compatibility.rs:23:5: 23:16
+-                                          // + span: $DIR/inline_compatibility.rs:24:5: 24:16
 -                                          // + literal: Const { ty: unsafe fn() {no_sanitize}, val: Value(<ZST>) }
 -     }
 - 

tests/mir-opt/inline/inline_compatibility.inlined_target_feature.Inline.diff

@@ -4,14 +4,14 @@
   fn inlined_target_feature() -> () {
       let mut _0: ();                      // return place in scope 0 at $DIR/inline_compatibility.rs:+0:40: +0:40
       let _1: ();                          // in scope 0 at $DIR/inline_compatibility.rs:+1:5: +1:21
-+     scope 1 (inlined target_feature) {   // at $DIR/inline_compatibility.rs:12:5: 12:21
++     scope 1 (inlined target_feature) {   // at $DIR/inline_compatibility.rs:13:5: 13:21
 +     }
 
       bb0: {
           StorageLive(_1);                 // scope 0 at $DIR/inline_compatibility.rs:+1:5: +1:21
 -         _1 = target_feature() -> bb1;    // scope 0 at $DIR/inline_compatibility.rs:+1:5: +1:21
 -                                          // mir::Constant
--                                          // + span: $DIR/inline_compatibility.rs:12:5: 12:19
+-                                          // + span: $DIR/inline_compatibility.rs:13:5: 13:19
 -                                          // + literal: Const { ty: unsafe fn() {target_feature}, val: Value(<ZST>) }
 -     }
 - 

tests/mir-opt/inline/inline_compatibility.not_inlined_c_variadic.Inline.diff

@@ -12,7 +12,7 @@
           StorageLive(_1);                 // scope 0 at $DIR/inline_compatibility.rs:+1:9: +1:10
           _1 = sum(const 4_u32, const 4_u32, const 30_u32, const 200_u32, const 1000_u32) -> bb1; // scope 0 at $DIR/inline_compatibility.rs:+1:13: +1:52
                                            // mir::Constant
-                                           // + span: $DIR/inline_compatibility.rs:41:13: 41:16
+                                           // + span: $DIR/inline_compatibility.rs:42:13: 42:16
                                            // + literal: Const { ty: unsafe extern "C" fn(u32, ...) -> u32 {sum}, val: Value(<ZST>) }
       }
 

tests/mir-opt/inline/inline_compatibility.not_inlined_no_sanitize.Inline.diff

@@ -9,7 +9,7 @@
           StorageLive(_1);                 // scope 0 at $DIR/inline_compatibility.rs:+1:5: +1:18
           _1 = no_sanitize() -> bb1;       // scope 0 at $DIR/inline_compatibility.rs:+1:5: +1:18
                                            // mir::Constant
-                                           // + span: $DIR/inline_compatibility.rs:28:5: 28:16
+                                           // + span: $DIR/inline_compatibility.rs:29:5: 29:16
                                            // + literal: Const { ty: unsafe fn() {no_sanitize}, val: Value(<ZST>) }
       }
 

tests/mir-opt/inline/inline_compatibility.not_inlined_target_feature.Inline.diff

@@ -9,7 +9,7 @@
           StorageLive(_1);                 // scope 0 at $DIR/inline_compatibility.rs:+1:5: +1:21
           _1 = target_feature() -> bb1;    // scope 0 at $DIR/inline_compatibility.rs:+1:5: +1:21
                                            // mir::Constant
-                                           // + span: $DIR/inline_compatibility.rs:17:5: 17:19
+                                           // + span: $DIR/inline_compatibility.rs:18:5: 18:19
                                            // + literal: Const { ty: unsafe fn() {target_feature}, val: Value(<ZST>) }
       }
 

tests/mir-opt/inline/inline_compatibility.rs

@@ -4,6 +4,7 @@
 
 #![crate_type = "lib"]
 #![feature(no_sanitize)]
+#![feature(target_feature_11)]
 #![feature(c_variadic)]
 
 // EMIT_MIR inline_compatibility.inlined_target_feature.Inline.diff

tests/ui/asm/x86_64/issue-89875.rs

@@ -2,6 +2,8 @@
 // needs-asm-support
 // only-x86_64
 
+#![feature(target_feature_11)]
+
 use std::arch::asm;
 
 #[target_feature(enable = "avx")]

tests/ui/rfcs/rfc-2396-target_feature-11/check-pass.rs

@@ -11,6 +11,8 @@
 // revisions: mir thir
 // [thir]compile-flags: -Z thir-unsafeck
 
+#![feature(target_feature_11)]
+
 #[target_feature(enable = "sse2")]
 const fn sse2() {}
 

tests/ui/rfcs/rfc-2396-target_feature-11/closures-inherit-target_feature.rs

@@ -5,6 +5,8 @@
 // [thir]compile-flags: -Z thir-unsafeck
 // only-x86_64
 
+#![feature(target_feature_11)]
+
 #[target_feature(enable="avx")]
 fn also_use_avx() {
     println!("Hello from AVX")

tests/ui/rfcs/rfc-2396-target_feature-11/feature-gate-target_feature_11.rs

@@ -0,0 +1,6 @@
+// only-x86_64
+
+#[target_feature(enable = "sse2")] //~ ERROR can only be applied to `unsafe` functions
+fn foo() {}
+
+fn main() {}

tests/ui/rfcs/rfc-2396-target_feature-11/feature-gate-target_feature_11.stderr

@@ -0,0 +1,14 @@
+error[E0658]: `#[target_feature(..)]` can only be applied to `unsafe` functions
+  --> $DIR/feature-gate-target_feature_11.rs:3:1
+   |
+LL | #[target_feature(enable = "sse2")]
+   | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+LL | fn foo() {}
+   | -------- not an `unsafe` function
+   |
+   = note: see issue #69098 <https://github.com/rust-lang/rust/issues/69098> for more information
+   = help: add `#![feature(target_feature_11)]` to the crate attributes to enable
+
+error: aborting due to previous error
+
+For more information about this error, try `rustc --explain E0658`.

tests/ui/rfcs/rfc-2396-target_feature-11/fn-ptr.mir.stderr

@@ -1,5 +1,5 @@
 error[E0308]: mismatched types
-  --> $DIR/fn-ptr.rs:9:21
+  --> $DIR/fn-ptr.rs:11:21
    |
 LL | #[target_feature(enable = "sse2")]
    | ---------------------------------- `#[target_feature]` added here

tests/ui/rfcs/rfc-2396-target_feature-11/fn-ptr.rs

@@ -2,6 +2,8 @@
 // [thir]compile-flags: -Z thir-unsafeck
 // only-x86_64
 
+#![feature(target_feature_11)]
+
 #[target_feature(enable = "sse2")]
 fn foo() {}
 

tests/ui/rfcs/rfc-2396-target_feature-11/fn-ptr.thir.stderr

@@ -1,5 +1,5 @@
 error[E0308]: mismatched types
-  --> $DIR/fn-ptr.rs:9:21
+  --> $DIR/fn-ptr.rs:11:21
    |
 LL | #[target_feature(enable = "sse2")]
    | ---------------------------------- `#[target_feature]` added here

tests/ui/rfcs/rfc-2396-target_feature-11/fn-traits.rs

@@ -1,5 +1,7 @@
 // only-x86_64
 
+#![feature(target_feature_11)]
+
 #[target_feature(enable = "avx")]
 fn foo() {}
 

tests/ui/rfcs/rfc-2396-target_feature-11/fn-traits.stderr

@@ -1,5 +1,5 @@
 error[E0277]: expected a `Fn<()>` closure, found `fn() {foo}`
-  --> $DIR/fn-traits.rs:22:10
+  --> $DIR/fn-traits.rs:24:10
    |
 LL |     call(foo);
    |     ---- ^^^ expected an `Fn<()>` closure, found `fn() {foo}`
@@ -10,13 +10,13 @@ LL |     call(foo);
    = note: wrap the `fn() {foo}` in a closure with no arguments: `|| { /* code */ }`
    = note: `#[target_feature]` functions do not implement the `Fn` traits
 note: required by a bound in `call`
-  --> $DIR/fn-traits.rs:9:17
+  --> $DIR/fn-traits.rs:11:17
    |
 LL | fn call(f: impl Fn()) {
    |                 ^^^^ required by this bound in `call`
 
 error[E0277]: expected a `FnMut<()>` closure, found `fn() {foo}`
-  --> $DIR/fn-traits.rs:23:14
+  --> $DIR/fn-traits.rs:25:14
    |
 LL |     call_mut(foo);
    |     -------- ^^^ expected an `FnMut<()>` closure, found `fn() {foo}`
@@ -27,13 +27,13 @@ LL |     call_mut(foo);
    = note: wrap the `fn() {foo}` in a closure with no arguments: `|| { /* code */ }`
    = note: `#[target_feature]` functions do not implement the `Fn` traits
 note: required by a bound in `call_mut`
-  --> $DIR/fn-traits.rs:13:21
+  --> $DIR/fn-traits.rs:15:21
    |
 LL | fn call_mut(f: impl FnMut()) {
    |                     ^^^^^^^ required by this bound in `call_mut`
 
 error[E0277]: expected a `FnOnce<()>` closure, found `fn() {foo}`
-  --> $DIR/fn-traits.rs:24:15
+  --> $DIR/fn-traits.rs:26:15
    |
 LL |     call_once(foo);
    |     --------- ^^^ expected an `FnOnce<()>` closure, found `fn() {foo}`
@@ -44,13 +44,13 @@ LL |     call_once(foo);
    = note: wrap the `fn() {foo}` in a closure with no arguments: `|| { /* code */ }`
    = note: `#[target_feature]` functions do not implement the `Fn` traits
 note: required by a bound in `call_once`
-  --> $DIR/fn-traits.rs:17:22
+  --> $DIR/fn-traits.rs:19:22
    |
 LL | fn call_once(f: impl FnOnce()) {
    |                      ^^^^^^^^ required by this bound in `call_once`
 
 error[E0277]: expected a `Fn<()>` closure, found `unsafe fn() {foo_unsafe}`
-  --> $DIR/fn-traits.rs:26:10
+  --> $DIR/fn-traits.rs:28:10
    |
 LL |     call(foo_unsafe);
    |     ---- ^^^^^^^^^^ call the function in a closure: `|| unsafe { /* code */ }`
@@ -61,13 +61,13 @@ LL |     call(foo_unsafe);
    = note: wrap the `unsafe fn() {foo_unsafe}` in a closure with no arguments: `|| { /* code */ }`
    = note: `#[target_feature]` functions do not implement the `Fn` traits
 note: required by a bound in `call`
-  --> $DIR/fn-traits.rs:9:17
+  --> $DIR/fn-traits.rs:11:17
    |
 LL | fn call(f: impl Fn()) {
    |                 ^^^^ required by this bound in `call`
 
 error[E0277]: expected a `FnMut<()>` closure, found `unsafe fn() {foo_unsafe}`
-  --> $DIR/fn-traits.rs:28:14
+  --> $DIR/fn-traits.rs:30:14
    |
 LL |     call_mut(foo_unsafe);
    |     -------- ^^^^^^^^^^ call the function in a closure: `|| unsafe { /* code */ }`
@@ -78,13 +78,13 @@ LL |     call_mut(foo_unsafe);
    = note: wrap the `unsafe fn() {foo_unsafe}` in a closure with no arguments: `|| { /* code */ }`
    = note: `#[target_feature]` functions do not implement the `Fn` traits
 note: required by a bound in `call_mut`
-  --> $DIR/fn-traits.rs:13:21
+  --> $DIR/fn-traits.rs:15:21
    |
 LL | fn call_mut(f: impl FnMut()) {
    |                     ^^^^^^^ required by this bound in `call_mut`
 
 error[E0277]: expected a `FnOnce<()>` closure, found `unsafe fn() {foo_unsafe}`
-  --> $DIR/fn-traits.rs:30:15
+  --> $DIR/fn-traits.rs:32:15
    |
 LL |     call_once(foo_unsafe);
    |     --------- ^^^^^^^^^^ call the function in a closure: `|| unsafe { /* code */ }`
@@ -95,7 +95,7 @@ LL |     call_once(foo_unsafe);
    = note: wrap the `unsafe fn() {foo_unsafe}` in a closure with no arguments: `|| { /* code */ }`
    = note: `#[target_feature]` functions do not implement the `Fn` traits
 note: required by a bound in `call_once`
-  --> $DIR/fn-traits.rs:17:22
+  --> $DIR/fn-traits.rs:19:22
    |
 LL | fn call_once(f: impl FnOnce()) {
    |                      ^^^^^^^^ required by this bound in `call_once`

tests/ui/rfcs/rfc-2396-target_feature-11/issue-99876.rs

@@ -1,5 +1,7 @@
 // check-pass
 
+#![feature(target_feature_11)]
+
 struct S<T>(T)
 where
     [T; (|| {}, 1).1]: Copy;