Fix more links

book.toml

@@ -38,7 +38,9 @@ exclude = [
     "www\\.amazon\\.com",
     "www\\.rustaceans\\.org",
     "play\\.rust-lang\\.org",
-    "tomlee\\.co"
+    "tomlee\\.co",
+    "marketplace\\.visualstudio\\.com",
+    "objects\\.githubusercontent\\.com"
 ]
 cache-timeout = 86400
 warning-policy = "error"

src/borrow_check/region_inference.md

@@ -112,9 +112,7 @@ common sorts of constraints are:
    (e.g. `'a: 'b`). Outlives constraints are generated by the [MIR type
    checker].
 2. Liveness constraints. Each region needs to be live at points where it can be
-   used. These constraints are collected by [`generate_constraints`].
-
-[`generate_constraints`]: https://doc.rust-lang.org/nightly/nightly-rustc/rustc_borrowck/constraint_generation/fn.generate_constraints.html
+   used.
 
 ## Inference Overview
 

src/bound-vars-and-params.md

@@ -3,7 +3,7 @@
 ## Early-bound parameters
 
 Early-bound parameters in rustc are identified by an index, stored in the
-[`ParamTy`] struct for types or the [`EarlyBoundRegion`] struct for lifetimes.
+[`ParamTy`] struct for types or the [`EarlyParamRegion`] struct for lifetimes.
 The index counts from the outermost declaration in scope. This means that as you
 add more binders inside, the index doesn't change.
 
@@ -24,7 +24,7 @@ In rustc, the [`Generics`] structure carries this information. So the
 in [this chapter](./generics.md).
 
 [`ParamTy`]: https://doc.rust-lang.org/nightly/nightly-rustc/rustc_middle/ty/struct.ParamTy.html
-[`EarlyBoundRegion`]: https://doc.rust-lang.org/nightly/nightly-rustc/rustc_middle/ty/struct.EarlyBoundRegion.html
+[`EarlyParamRegion`]: https://doc.rust-lang.org/nightly/nightly-rustc/rustc_middle/ty/region/struct.EarlyParamRegion.html
 [`Generics`]: https://doc.rust-lang.org/nightly/nightly-rustc/rustc_middle/ty/struct.Generics.html
 
 ## Late-bound parameters

src/const-eval/interpret.md

@@ -99,9 +99,9 @@ further queries need to be executed in order to get at something as simple as a
 Future evaluations of the same constants will not actually invoke
 the interpreter, but just use the cached result.
 
-[`Operand`]: https://doc.rust-lang.org/nightly/nightly-rustc/rustc_const_eval/interpret/enum.Operand.html
+[`Operand`]: https://doc.rust-lang.org/nightly/nightly-rustc/rustc_const_eval/interpret/operand/enum.Operand.html
 [`Immediate`]: https://doc.rust-lang.org/nightly/nightly-rustc/rustc_const_eval/interpret/enum.Immediate.html
-[`ConstValue`]: https://doc.rust-lang.org/nightly/nightly-rustc/rustc_middle/mir/interpret/enum.ConstValue.html
+[`ConstValue`]: https://doc.rust-lang.org/nightly/nightly-rustc/rustc_middle/mir/consts/enum.ConstValue.html
 [`Scalar`]: https://doc.rust-lang.org/nightly/nightly-rustc/rustc_middle/mir/interpret/enum.Scalar.html
 [`op_to_const`]: https://doc.rust-lang.org/nightly/nightly-rustc/rustc_const_eval/const_eval/eval_queries/fn.op_to_const.html
 

src/diagnostics/diagnostic-structs.md

@@ -1,7 +1,7 @@
 # Diagnostic and subdiagnostic structs
 rustc has three diagnostic derives that can be used to create simple diagnostics,
 which are recommended to be used when they are applicable:
-`#[derive(Diagnostic)]`, #[derive(LintDiagnostic)], and `#[derive(Subdiagnostic)]`.
+`#[derive(Diagnostic)]`, `#[derive(LintDiagnostic)]`, and `#[derive(Subdiagnostic)]`.
 
 Diagnostics created with the derive macros can be translated into different
 languages and each has a slug that uniquely identifies the diagnostic.

src/diagnostics/error-codes.md

@@ -24,7 +24,7 @@ written, as always: ask your reviewer or ask around on the Rust Discord or Zulip
 
 [^new-explanations]: See the draft RFC [here][new-explanations-rfc].
 
-[`rustc_error_codes`]: https://doc.rust-lang.org/nightly/nightly-rustc/rustc_error_codes/error_codes/index.html
+[`rustc_error_codes`]: https://doc.rust-lang.org/nightly/nightly-rustc/rustc_error_codes/index.html
 [CommonMark Spec]: https://spec.commonmark.org/current/
 [RFC 1567]: https://github.com/rust-lang/rfcs/blob/master/text/1567-long-error-codes-explanation-normalization.md
 [new-explanations-rfc]: https://github.com/rust-lang/rfcs/pull/3370

src/generics.md

@@ -6,20 +6,20 @@ inference, type checking, and trait solving. Conceptually, during these routines
 that one type is equal to another type and want to swap one out for the other and then swap that out
 for another type and so on until we eventually get some concrete types (or an error).
 
-In rustc this is done using [GenericArgsRef].
-Conceptually, you can think of `GenericArgsRef` as a list of types that are to be substituted for
+In rustc this is done using [GenericArgs].
+Conceptually, you can think of `GenericArgs` as a list of types that are to be substituted for
  the generic type parameters of the ADT.
 
-`GenericArgsRef` is a type alias of `&'tcx List<GenericArg<'tcx>>` (see [`List` rustdocs][list]).
+`GenericArgs` is a type alias of `&'tcx List<GenericArg<'tcx>>` (see [`List` rustdocs][list]).
 [`GenericArg`] is essentially a space-efficient wrapper around [`GenericArgKind`], which is an enum
 indicating what kind of generic the type parameter is (type, lifetime, or const).
-Thus, `GenericArgsRef` is conceptually like a `&'tcx [GenericArgKind<'tcx>]` slice (but it is
+Thus, `GenericArgs` is conceptually like a `&'tcx [GenericArgKind<'tcx>]` slice (but it is
 actually a `List`).
 
 [list]: https://doc.rust-lang.org/nightly/nightly-rustc/rustc_middle/ty/struct.List.html
 [`GenericArg`]: https://doc.rust-lang.org/nightly/nightly-rustc/rustc_middle/ty/struct.GenericArg.html
 [`GenericArgKind`]: https://doc.rust-lang.org/nightly/nightly-rustc/rustc_middle/ty/enum.GenericArgKind.html
-[GenericArgsRef]: https://doc.rust-lang.org/nightly/nightly-rustc/rustc_middle/ty/type.GenericArgsRef.html
+[GenericArgs]: https://doc.rust-lang.org/nightly/nightly-rustc/rustc_middle/ty/type.GenericArgs.html
 
 So why do we use this `List` type instead of making it really a slice? It has the length "inline",
 so `&List` is only 32 bits. As a consequence, it cannot be "subsliced" (that only works if the
@@ -37,10 +37,10 @@ struct MyStruct<T>
 
 - There would be an `AdtDef` (and corresponding `DefId`) for `MyStruct`.
 - There would be a `TyKind::Param` (and corresponding `DefId`) for `T` (more later).
-- There would be a `GenericArgsRef` containing the list `[GenericArgKind::Type(Ty(T))]`
+- There would be a `GenericArgs` containing the list `[GenericArgKind::Type(Ty(T))]`
     - The `Ty(T)` here is my shorthand for entire other `ty::Ty` that has `TyKind::Param`, which we
       mentioned in the previous point.
-- This is one `TyKind::Adt` containing the `AdtDef` of `MyStruct` with the `GenericArgsRef` above.
+- This is one `TyKind::Adt` containing the `AdtDef` of `MyStruct` with the `GenericArgs` above.
 
 Finally, we will quickly mention the
 [`Generics`](https://doc.rust-lang.org/nightly/nightly-rustc/rustc_middle/ty/struct.Generics.html) type. It
@@ -114,7 +114,7 @@ This example has a few different substitutions:
 
 Let’s look a bit more closely at that last substitution to see why we use indexes. If we want to
 find the type of `foo.x`, we can get generic type of `x`, which is `Vec<Param(0)>`. Now we can take
-the index `0` and use it to find the right type substitution: looking at `Foo`'s `GenericArgsRef`,
+the index `0` and use it to find the right type substitution: looking at `Foo`'s `GenericArgs`,
 we have the list `[u32, f32]` , since we want to replace index `0`, we take the 0-th index of this
 list, which is `u32`. Voila!
 
@@ -127,7 +127,7 @@ You may have a couple of followup questions…
  `MyStruct`: `Adt(Foo, &[Param(0), Param(1)])`.
 
 How do we actually do the substitutions? There is a function for that too! You
-use [`instantiate`] to replace a `GenericArgsRef` with  another list of types.
+use [`instantiate`] to replace a `GenericArgs` with another list of types.
 
 [Here is an example of actually using `instantiate` in the compiler][instantiatex].
 The exact details are not too important, but in this piece of code, we happen to be

src/ty-fold.md

@@ -35,7 +35,7 @@ So to reiterate:
 - `TypeFoldable`  is a trait that is implemented by things that embed types.
 
 In the case of `subst`, we can see that it is implemented as a `TypeFolder`:
-[`SubstFolder`](https://doc.rust-lang.org/nightly/nightly-rustc/rustc_middle/ty/subst/struct.SubstFolder.html).
+[`ArgFolder`](https://doc.rust-lang.org/nightly/nightly-rustc/rustc_middle/ty/generic_args/struct.ArgFolder.html).
 Looking at its implementation, we see where the actual substitutions are happening.
 
 However, you might also notice that the implementation calls this `super_fold_with` method. What is

src/ty.md

@@ -287,7 +287,7 @@ struct MyStruct<T> { x: u32, y: T }
 The type `MyStruct<u32>` would be an instance of `TyKind::Adt`:
 
 ```rust,ignore
-Adt(&'tcx AdtDef, GenericArgsRef<'tcx>)
+Adt(&'tcx AdtDef, GenericArgs<'tcx>)
 //  ------------  ---------------
 //  (1)            (2)
 //
@@ -301,12 +301,12 @@ There are two parts:
   parameters. In our example, this is the `MyStruct` part *without* the argument `u32`.
   (Note that in the HIR, structs, enums and unions are represented differently, but in `ty::Ty`,
   they are all represented using `TyKind::Adt`.)
-- The [`GenericArgsRef`][GenericArgsRef] is an interned list of values that are to be substituted
+- The [`GenericArgs`][GenericArgs] is an interned list of values that are to be substituted
 for the generic parameters.  In our example of `MyStruct<u32>`, we would end up with a list like
 `[u32]`. We’ll dig more into generics and substitutions in a little bit.
 
 [adtdef]: https://doc.rust-lang.org/nightly/nightly-rustc/rustc_middle/ty/struct.AdtDef.html
-[GenericArgsRef]: https://doc.rust-lang.org/nightly/nightly-rustc/rustc_middle/ty/subst/type.GenericArgsRef.html
+[GenericArgs]: https://doc.rust-lang.org/nightly/nightly-rustc/rustc_middle/ty/type.GenericArgs.html
 
 **`AdtDef` and `DefId`**
 

src/unsafety-checking.md

@@ -75,5 +75,4 @@ the ast that searches for unsafe blocks, functions and implementations, as well
 as certain unsafe attributes.
 
 [Unsafe traits]: https://doc.rust-lang.org/reference/items/traits.html#unsafe-traits
-[coherence]: /home/matthew/rust/compiler/rustc_hir_analysis/src/coherence/unsafety.rs
-
+[coherence]: https://github.com/rust-lang/rust/blob/master/compiler/rustc_hir_analysis/src/coherence/unsafety.rs