Cannot get status from my zhimi.airpurifier.mb3(Airpurifier 3H)

[rogerbl]

When I issue the command to get info from the airpurifier it works, but when I want to get the status the following error msg comes:
Error: {'code': -5001, 'message': 'command error'}
This is the command I issued to get the status:
miiocli airpurifier --ip 192.168.100.191 --token xxxxxxxxxxxxxxxxxx status
and the info request which works:
miiocli airpurifier --ip 192.168.100.191 --token xxxxxxxxxxxxxxxxxx info
I get the same error as above when I try to connect in a python script.
with AirPurifier(ip,token,0,0)
What can be wrong?
I 've got another older 2s airpurifier which works fine with these commands.
I use python 3.8 on windows 10 and Ubuntu 20 Same error on both.
Model: zhimi.airpurifier.mb3
Hardware version: esp32
Firmware version: 2.0.7

Name: python-miio
Version: 0.5.0.1
Summary: Python library for interfacing with Xiaomi smart appliances
Home-page: https://github.com/rytilahti/python-miio
Author: Teemu Rytilahti
Author-email: tpr@iki.fi

Version information (please complete the following information):

• OS: [e.g.Linux]
• python-miio: [Use miiocli --version or pip show python-miio]

Device information:
If the issue is specific to a device [Use miiocli device --ip <ip address> --token <token> info]:

• Model:
• Hardware version:
• Firmware version:

To Reproduce
Steps to reproduce the behavior:
1.

Expected behavior
A clear and concise description of what you expected to happen.

Console output
If applicable, add console output to help explain your problem.
If the issue is about communication with a specific device, consider including the output using the --debug flag.

[rytilahti]

You have to use miiocli airpurifiermiot for this device, #1030 is a similar problem (different module, but same idea).

[rogerbl]

Thanks mate Skaff deg Outlook for Android<https://aka.ms/ghei36>

…

________________________________ From: Teemu R. ***@***.***> Sent: Thursday, May 6, 2021 11:26:58 PM To: rytilahti/python-miio ***@***.***> Cc: rogerbl ***@***.***>; Author ***@***.***> Subject: Re: [rytilahti/python-miio] Cannot get status from my zhimi.airpurifier.mb3(Airpurifier 3H) (#1037) You have to use miiocli airpurifiermiot for this device, #1030<#1030> is a similar problem (different module, but same idea). — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub<#1037 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/ACTFYAB64OJLGIFAA6M3MELTMMCSFANCNFSM44HXSVYA>.

[rytilahti]

I assume it worked, so I'm closing this now :-)