Skip to content

scottmason88/BTT-PITFT5-Mount-for-Voron-v2.4

Repository files navigation

BTT-PITFT5-Mount-for-Voron-v2.4

Mount for Big Tree Tech PI TFT 5 Inch for the Voron 2.4, using 2.2 mount. Along with the screen you'll need a longer ribbon cable, as the screen comes with a 2" cable since it's designed to be used with the Raspberry Pi attached to the back.

Special thanks to OrkusMG for doing most of the work on this, I just modified it for use with a different screen.
Link to his original project

Required Materials: 12x M3x12 SHCS
2x M5x10 BHCS
4x Heatset Inserts
1x BTT PI TFT 5 inch
1x Extended Ribbon Cable

Step 1: Step 1

Step 2: Step 2

Step 3: Step 3

Step 4: Sorry I don't have images for these later parts, I screenshotted the previous one from the 2.2 manual. Insert 4 heatset inserts into front cover. Insert screen. Connect ribbon cable to screen.

Step 5: Route ribbon cable through one of the holes in the back. 4 M3x12 SHCS go into back to connect to front cover. Do not overtighten! Connect ribbon cable to display port on Raspberry Pi.

Step 6: 4 M3x12 SHCS connect screen case to mount.

Step 7: Install KlipperScreen.

Step 8: ???

Step 9: Profit.

Final Result

About

Mount for PI TFT 5 inch for the Voron 2.4, using 2.2 bracket

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published