Zephyrus G16 2024 Slash Light can't show sleep animation when close lid

[Mckay-Yang]

There are once a issue and been repaired in version 0.181. And this issue is back in version 0.188.
Origin issue: Zephyrus G16 2024 Incorrect Slash Lighting Preset on Lid Close #2815

[seerge]

@Mckay-Yang hello,

I can imagine this is connected with another request #3054

Can you try this build and check if both lid close ON / OFF options work as expected here ?
GHelper.zip

[Mckay-Yang]

When using the battery, regardless of whether the "Disable on lid close" option is checked, there is no animation after closing the lid.（Sorry, my English is not very good.

[seerge]

@Mckay-Yang yeah. But did it behave differently before (in old builds?) I think it's just a way device preserves battery power by turning it OFF completely on battery :)

[Mckay-Yang]

I tried 0.187 its just work like the build you gave to me. Also turn off the light when on battery regardless of whether the "Disable on lid close" option is checked. And, it works normally when plugged in.

[seerge]

Ok, but then it means this "lid-close" animation be forced on battery at all :)

[seerge]

@Mckay-Yang ok, after digging deeper here I have found what is actually happening

When lid is closed it's pretty much 3 separate states Slash Lighting could be in (not 2)

1. OFF (that's what "disable on lid-close" checkbox does)
2. ON and showing animation you had when lid was open
3. ON but showing special "sleep" (blinking) animation

And the problem that guy in #3054 and you here ask for an opposite things.

I'm personally keep to keep showing old animation (option 2) as default when lid is closed. As this is more logical.

But to accommodate your request I can allow "sleep" animation as well, but if an optional config param is set in %appdata\GHelper\config.json

"slash_sleep" : 1,

This build should behave as explained above
GHelper.zip