- Docs: http://net-ssh.github.com/net-ssh
- Issues: https://github.com/net-ssh/net-ssh/issues
- Codes: https://github.com/net-ssh/net-ssh
- Email: net-ssh@solutious.com
As of v2.6.4, all gem releases are signed. See INSTALL.
Net::SSH is a pure-Ruby implementation of the SSH2 client protocol. It allows you to write programs that invoke and interact with processes on remote servers, via SSH2.
- Execute processes on remote servers and capture their output
- Run multiple processes in parallel over a single SSH connection
- Support for SSH subsystems
- Forward local and remote ports via an SSH connection
Net::SSH 6.0 disables by default the usage of weak algorithms. We strongly recommend that you install a servers's version that supports the latest algorithms.
It is possible to return to the previous behavior by adding the option : append_all_supported_algorithms: true
Unsecure algoritms will be definively remove in Net::SSH 7.*.
| Name | Support | Details |
|---|---|---|
| ssh-rsa | OK | |
| ssh-ed25519 | OK | Require the gem ed25519 |
| ecdsa-sha2-nistp521 | OK | using weak elliptic curves |
| ecdsa-sha2-nistp384 | OK | using weak elliptic curves |
| ecdsa-sha2-nistp256 | OK | using weak elliptic curves |
| ssh-dss | Deprecated in 6.0 | unsecure, will be removed in 7.0 |
| Name | Support | Details |
|---|---|---|
| curve25519-sha256 | OK | Require the gem x25519 |
| ecdh-sha2-nistp521 | OK | using weak elliptic curves |
| ecdh-sha2-nistp384 | OK | using weak elliptic curves |
| ecdh-sha2-nistp256 | OK | using weak elliptic curves |
| diffie-hellman-group1-sha1 | Deprecated in 6.0 | unsecure, will be removed in 7.0 |
| diffie-hellman-group14-sha1 | OK | |
| diffie-hellman-group-exchange-sha1 | Deprecated in 6.0 | unsecure, will be removed in 7.0 |
| diffie-hellman-group-exchange-sha256 | OK |
| Name | Support | Details |
|---|---|---|
| aes256-ctr / aes192-ctr / aes128-ctr | OK | using weak elliptic curves |
| aes256-cbc / aes192-cbc / aes128-cbc | Deprecated in 6.0 | unsecure, will be removed in 7.0 |
| rijndael-cbc@lysator.liu.se | Deprecated in 6.0 | unsecure, will be removed in 7.0 |
| blowfish-ctr blowfish-cbc | Deprecated in 6.0 | unsecure, will be removed in 7.0 |
| cast128-ctr cast128-cbc | Deprecated in 6.0 | unsecure, will be removed in 7.0 |
| 3des-ctr 3des-cbc | Deprecated in 6.0 | unsecure, will be removed in 7.0 |
| idea-cbc | Deprecated in 6.0 | unsecure, will be removed in 7.0 |
| none | Deprecated in 6.0 | unsecure, will be removed in 7.0 |
| Name | Support | Details |
|---|---|---|
| hmac-sha2-512-etm | OK | |
| hmac-sha2-256-etm | OK | |
| hmac-sha2-512 | OK | |
| hmac-sha2-256 | OK | |
| hmac-sha2-512-96 | Deprecated in 6.0 | removed from the specification, will be removed in 7.0 |
| hmac-sha2-256-96 | Deprecated in 6.0 | removed from the specification, will be removed in 7.0 |
| hmac-sha1 | OK | for backward compatibility |
| hmac-sha1-96 | Deprecated in 6.0 | unsecure, will be removed in 7.0 |
| hmac-ripemd160 | Deprecated in 6.0 | unsecure, will be removed in 7.0 |
| hmac-md5 | Deprecated in 6.0 | unsecure, will be removed in 7.0 |
| hmac-md5-96 | Deprecated in 6.0 | unsecure, will be removed in 7.0 |
| none | Deprecated in 6.0 | unsecure, will be removed in 7.0 |
In a nutshell:
require 'net/ssh'
Net::SSH.start('host', 'user', password: "password") do |ssh|
# capture all stderr and stdout output from a remote process
output = ssh.exec!("hostname")
puts output
# capture only stdout matching a particular pattern
stdout = ""
ssh.exec!("ls -l /home/jamis") do |channel, stream, data|
stdout << data if stream == :stdout
end
puts stdout
# run multiple processes in parallel to completion
ssh.exec "sed ..."
ssh.exec "awk ..."
ssh.exec "rm -rf ..."
ssh.loop
# open a new channel and configure a minimal set of callbacks, then run
# the event loop until the channel finishes (closes)
channel = ssh.open_channel do |ch|
ch.exec "/usr/local/bin/ruby /path/to/file.rb" do |ch, success|
raise "could not execute command" unless success
# "on_data" is called when the process writes something to stdout
ch.on_data do |c, data|
$stdout.print data
end
# "on_extended_data" is called when the process writes something to stderr
ch.on_extended_data do |c, type, data|
$stderr.print data
end
ch.on_close { puts "done!" }
end
end
channel.wait
# forward connections on local port 1234 to port 80 of www.capify.org
ssh.forward.local(1234, "www.capify.org", 80)
ssh.loop { true }
endSee Net::SSH for more documentation, and links to further information.
The only requirement you might be missing is the OpenSSL bindings for Ruby with a version greather than 1.0.1.
These are built by default on most platforms, but you can verify that they're built and installed on your system by running the following command line:
ruby -ropenssl -e 'puts OpenSSL::OPENSSL_VERSION'If that spits out something like OpenSSL 1.0.1 14 Mar 2012, then you're set.
If you get an error, then you'll need to see about rebuilding ruby with OpenSSL support,
or (if your platform supports it) installing the OpenSSL bindings separately.
gem install net-ssh # might need sudo privilegesNOTE: If you are running on jruby on windows you need to install jruby-pageant manually
(gemspec doesn't allow for platform specific dependencies).
However, in order to be sure the code you're installing hasn't been tampered with, it's recommended that you verify the signature. To do this, you need to add my public key as a trusted certificate (you only need to do this once):
# Add the public key as a trusted certificate
# (You only need to do this once)
curl -O https://raw.githubusercontent.com/net-ssh/net-ssh/master/net-ssh-public_cert.pem
gem cert --add net-ssh-public_cert.pemThen, when install the gem, do so with high security:
gem install net-ssh -P HighSecurityIf you don't add the public key, you'll see an error like "Couldn't verify data signature". If you're still having trouble let me know and I'll give you a hand.
For ed25519 public key auth support your bundle file should contain ed25519, bcrypt_pbkdf dependencies.
gem install ed25519
gem install bcrypt_pbkdfFor curve25519-sha256 kex exchange support your bundle file should contain x25519 dependency.
- See net-ssh.gemspec for current versions ruby requirements
If you want to run the tests or use any of the Rake tasks, you'll need Mocha and other dependencies listed in Gemfile
Run the test suite from the net-ssh directory with the following command:
bundle exec rake testRun a single test file like this:
ruby -Ilib -Itest test/transport/test_server_version.rbTo run integration tests see test/integration/README.txt
rake buildIf you have the net-ssh private signing key, you will be able to create signed release builds. Make sure the private key path matches the signing_key path set in net-ssh.gemspec and tell rake to sign the gem by setting the NET_SSH_BUILDGEM_SIGNED flag:
NET_SSH_BUILDGEM_SIGNED=true rake buildFor time to time, the public certificate associated to the private key needs to be renewed. You can do this with the following command:
gem cert --build netssh@solutious.com --private-key path/2/net-ssh-private_key.pem
mv gem-public_cert.pem net-ssh-public_cert.pem
gem cert --add net-ssh-public_cert.pemThis project exists thanks to all the people who contribute.
Thank you to all our backers! 🙏 Become a backer
Support this project by becoming a sponsor. Your logo will show up here with a link to your website. Become a sponsor
(The MIT License)
Copyright (c) 2008 Jamis Buck
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the 'Software'), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED 'AS IS', WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.