A communicator with LoRa through a serial port. This is done by using the LoRa Wemos module https://github.com/hallard/WeMos-Lora with a Wemos D1 mini pro. The Wemos is connected to my Pi with USB -> Micro USB.
With this project we can send "commands" to the open LoRa network. Please keep in mind that the Wemos also needs some firmware for this. This firmware can be found here
For questions please contact @sjoulbak on the Elixir slack.
Currently this project only supports the nerves_system_rpi project. Since
there should be a special setting enabled before this project can communicate
with the CH341 module. I cloned the nerves_system_rpi repo and added this config.
This project has the name nerves_system_ch341_rpi and can be found: https://github.com/sjoulbak/nerves_system_ch341_rpi
To start your Nerves app:
export MIX_TARGET=nerves_system_ch341_rpi- Install dependencies with
mix deps.get - Create firmware with
mix firmware - Burn to an SD card with
mix firmware.burn
- Official docs: https://hexdocs.pm/nerves/getting-started.html
- Official website: http://www.nerves-project.org/
- Discussion Slack elixir-lang #nerves (Invite)
- Source: https://github.com/nerves-project/nerves