Address upstream comments (#11)

* Remove all non bfn specific changes from upstream PR

.gitmodules

@@ -77,9 +77,6 @@
 [submodule "platform/broadcom/sonic-platform-modules-mitac"]
 	path = platform/broadcom/sonic-platform-modules-mitac
 	url = https://github.com/MiTAC-EBU/sonic-platform-modules-mitac.git
-[submodule "platform/centec/sonic-platform-modules-e582"]
-	path = platform/centec/sonic-platform-modules-e582
-	url = https://github.com/CentecNetworks/sonic-platform-modules-e582
 [submodule "platform/barefoot/sonic-platform-modules-ingrasys"]
 	path = platform/barefoot/sonic-platform-modules-ingrasys
 	url = https://github.com/Ingrasys-sonic/sonic-platform-modules-ingrasys-barefoot.git

build_debian.sh

@@ -3,26 +3,22 @@
 ## an ONIE installer image.
 ##
 ## USAGE:
-##   ./build_debian USERNAME PASSWORD_ENCRYPTED
-## PARAMETERS:
+##   USERNAME=username PASSWORD=password ./build_debian
+## ENVIRONMENT:
 ##   USERNAME
 ##          The name of the default admin user
-##   PASSWORD_ENCRYPTED
-##          The encrypted password, expected by chpasswd command
+##   PASSWORD
+##          The password, expected by chpasswd command
 
 ## Default user
-USERNAME=$1
 [ -n "$USERNAME" ] || {
-    echo "Error: no or empty USERNAME argument"
+    echo "Error: no or empty USERNAME"
     exit 1
 }
 
-## Password for the default user, customizable by environment variable
-## By default it is an empty password
-## You may get a crypted password by: perl -e 'print crypt("YourPaSsWoRd", "salt"),"\n"'
-PASSWORD_ENCRYPTED=$2
-[ -n "$PASSWORD_ENCRYPTED" ] || {
-    echo "Error: no or empty PASSWORD_ENCRYPTED argument"
+## Password for the default user
+[ -n "$PASSWORD" ] || {
+    echo "Error: no or empty PASSWORD"
     exit 1
 }
 
@@ -178,7 +174,7 @@ sudo cp files/docker/docker.service.conf $_
 ## Note: user should be in the group with the same name, and also in sudo/docker group
 sudo LANG=C chroot $FILESYSTEM_ROOT useradd -G sudo,docker $USERNAME -c "$DEFAULT_USERINFO" -m -s /bin/bash
 ## Create password for the default user
-echo $USERNAME:$PASSWORD_ENCRYPTED | sudo LANG=C chroot $FILESYSTEM_ROOT chpasswd -e
+echo "$USERNAME:$PASSWORD" | sudo LANG=C chroot $FILESYSTEM_ROOT chpasswd
 
 ## Pre-install hardware drivers
 sudo LANG=C chroot $FILESYSTEM_ROOT apt-get -y install      \
@@ -239,6 +235,12 @@ sudo dpkg --root=$FILESYSTEM_ROOT -i target/debs/libwrap0_*.deb || \
 ## Disable kexec supported reboot which was installed by default
 sudo sed -i 's/LOAD_KEXEC=true/LOAD_KEXEC=false/' $FILESYSTEM_ROOT/etc/default/kexec
 
+## Fix ping tools permission so non root user can directly use them
+## Note: this is a workaround since aufs doesn't support extended attributes
+## Ref: https://github.com/moby/moby/issues/5650#issuecomment-303499489
+## TODO: remove workaround when the overlay filesystem support extended attributes
+sudo chmod u+s $FILESYSTEM_ROOT/bin/ping{,6}
+
 ## Remove sshd host keys, and will regenerate on first sshd start
 sudo rm -f $FILESYSTEM_ROOT/etc/ssh/ssh_host_*_key*
 sudo cp files/sshd/host-ssh-keygen.sh $FILESYSTEM_ROOT/usr/local/bin/
@@ -301,6 +303,7 @@ set /files/etc/sysctl.conf/net.ipv6.conf.eth0.forwarding 0
 
 set /files/etc/sysctl.conf/net.ipv6.conf.default.accept_dad 0
 set /files/etc/sysctl.conf/net.ipv6.conf.all.accept_dad 0
+set /files/etc/sysctl.conf/net.ipv6.conf.eth0.accept_dad 0
 
 set /files/etc/sysctl.conf/net.ipv6.conf.eth0.accept_ra_defrtr 0
 

device/arista/x86_64-arista_7050_qx32/Arista-7050-Q16S64/sai.profile

@@ -1,2 +1,2 @@
-SAI_INIT_CONFIG_FILE=/etc/bcm/td2-a7050-qx32-16x40G+32x10G+8x40G.config.bcm
+SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/td2-a7050-qx32-16x40G+32x10G+8x40G.config.bcm
 SAI_NUM_ECMP_MEMBERS=32