Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

[ntp] enable/disable NTP long jump according to reboot type #4577

Merged
merged 4 commits into from
May 20, 2020
Merged

[ntp] enable/disable NTP long jump according to reboot type #4577

merged 4 commits into from
May 20, 2020

Conversation

yxieca
Copy link
Contributor

@yxieca yxieca commented May 12, 2020 •
edited
Loading

- Why I did it
NTP long jump could still causing unexpected failures. It is more dangerous after fast/warm reboot when reliability is on the line.

- How I did it

  • Enable NTP long jump after cold reboot.
  • Disable NTP long jump after warrm/fast reboot.

Signed-off-by: Ying Xie ying.xie@microsoft.com

- How to verify it
cold reboot:
May 12 04:20:12.791159 str-7260cx3-acs-1 INFO systemd[1]: Starting Update NTP configuration...
May 12 04:20:13.928988 str-7260cx3-acs-1 INFO ntp-config.sh[3829]: Enabling NTP long jump for reboot type cold ...
admin@str-7260cx3-acs-1:$ cat /etc/default/ntp
NTPD_OPTS='-g'

warm reboot:
May 12 04:37:45.971592 str-7260cx3-acs-1 INFO systemd[1]: Starting Update NTP configuration...
May 12 04:37:47.329887 str-7260cx3-acs-1 INFO ntp-config.sh[3933]: Disabling NTP long jump for reboot type warm ...
admin@str-7260cx3-acs-1:$ cat /etc/default/ntp
NTPD_OPTS='-x'
fast reboot:
May 12 04:40:39.773005 str-7260cx3-acs-1 INFO systemd[1]: Starting Update NTP configuration...
May 12 04:40:40.860081 str-7260cx3-acs-1 INFO ntp-config.sh[3787]: Disabling NTP long jump for reboot type fast ...
admin@str-7260cx3-acs-1:$ cat /etc/default/ntp
NTPD_OPTS='-x'

@yxieca
[ntp] enable/disable NTP long jump according to reboot type
6bdb8a7 
- Enable NTP long jump after cold reboot.
- Disable NTP long jump after warrm/fast reboot.

Signed-off-by: Ying Xie <ying.xie@microsoft.com>
jleveque
jleveque suggested changes May 12, 2020
View reviewed changes
files/image_config/ntp/ntp-config.sh Outdated Show resolved Hide resolved
files/image_config/ntp/ntp-config.sh Outdated Show resolved Hide resolved
@daall
Copy link
Contributor

daall commented May 12, 2020

retest this please

jleveque
jleveque previously approved these changes May 12, 2020
View reviewed changes
lguohan
lguohan reviewed May 12, 2020
View reviewed changes
files/image_config/ntp/ntp-config.sh Outdated

function get_database_reboot_type()
{
SYSTEM_WARM_START=`/usr/bin/redis-cli -n 6 hget "WARM_RESTART_ENABLE_TABLE|system" enable`
Copy link
Collaborator

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

use sonic-db-cli for multi-db support.

Copy link
Contributor Author

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Thanks. Changed.

@yxieca yxieca mentioned this pull request May 12, 2020
Merged
pavel-shirshov
pavel-shirshov reviewed May 12, 2020
View reviewed changes
Copy link
Contributor

@pavel-shirshov pavel-shirshov left a comment

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

  1. I'd suggest to use syslog as addition to all echo output.
  2. Please check my another comment.

files/image_config/ntp/ntp-config.sh Show resolved Hide resolved
@zhenggen-xu
Copy link
Collaborator

What was exactly the issue caused by NTP long jump? Could that happen even if NTP long jump disabled? I feel we should fix the source of the issue rather than modifying NTP config.

@yxieca
Copy link
Contributor Author

yxieca commented May 13, 2020

What was exactly the issue caused by NTP long jump? Could that happen even if NTP long jump disabled? I feel we should fix the source of the issue rather than modifying NTP config.

Unfortunately using monotonic clock when checking time difference is not a well established behavior. We fixed the known issues. But there are open source code that we don't have control over. We are afraid similar issue might happen in the future.

@yxieca
Copy link
Contributor Author

yxieca commented May 13, 2020

  1. I'd suggest to use syslog as addition to all echo output.
    echo in service script will reach syslog. Please reference to the test output in this PR. logger on the other hand doesn't reach syslog.
  1. Please check my another comment.
    I think Joe answered the other comment.

@zhenggen-xu
Copy link
Collaborator

What was exactly the issue caused by NTP long jump? Could that happen even if NTP long jump disabled? I feel we should fix the source of the issue rather than modifying NTP config.

Unfortunately using monotonic clock when checking time difference is not a well established behavior. We fixed the known issues. But there are open source code that we don't have control over. We are afraid similar issue might happen in the future.

That is fair, but I still failed to understand the issue itself. which daemons caused the issues and what were the symptoms? why cold boot is fine? and why disable NTP long jump is guaranteed to work? Sorry for too many questions. :-)

@yxieca
Copy link
Contributor Author

yxieca commented May 14, 2020

What was exactly the issue caused by NTP long jump? Could that happen even if NTP long jump disabled? I feel we should fix the source of the issue rather than modifying NTP config.

Unfortunately using monotonic clock when checking time difference is not a well established behavior. We fixed the known issues. But there are open source code that we don't have control over. We are afraid similar issue might happen in the future.

That is fair, but I still failed to understand the issue itself. which daemons caused the issues and what were the symptoms? why cold boot is fine? and why disable NTP long jump is guaranteed to work? Sorry for too many questions. :-)

This fix/issue: sonic-net/sonic-sairedis#613

@yxieca yxieca merged commit cdfb1ce into sonic-net:master May 20, 2020
@yxieca yxieca deleted the ntp branch May 20, 2020 17:57
abdosi pushed a commit that referenced this pull request May 21, 2020
@yxieca @abdosi
[ntp] enable/disable NTP long jump according to reboot type (#4577)
14b3f00 
* [ntp] enable/disable NTP long jump according to reboot type

- Enable NTP long jump after cold reboot.
- Disable NTP long jump after warrm/fast reboot.

Signed-off-by: Ying Xie <ying.xie@microsoft.com>

* fix typo

* further refactoring

* use sonic-db-cli instead
bbinxie added a commit to SONIC-DEV/sonic-buildimage that referenced this pull request May 22, 2020
@bbinxie @msosyak
@srideepDell @lguohan @pavel-shirshov @abdosi @arlakshm @santhosh-kt @akokhan @daall @qiluo-msft @yxieca @Staphylo @judyjoseph
update from azure/201911 (#180)
906745c 
* [201911][devices] skip_fancontrol for wedge 100 barefoot platforms (sonic-net#4528)

* [device] DellEMC s5232f  50G hwsku support (sonic-net#4525)

* [device] DellEmc S5232 support for new hwsku C8D48
8 100G ports and 48 50G ports

* 10G ports update for S5232 hwsku-C8D48

Signed-off-by: Srideep Devireddy <srideep_devireddy@dell.com>

* DellEMC S6000 updated sensors.conf (sonic-net#4568)

Change PSU MAX temperature to 80 degree
Change tmp75 sensors default temperature value from 25/50 to 70/80 degree.

* [sonic-slave-stretch]: install same version for docker-ce and docker-ce-cli

difference versions can cause compatibility issue between the server and client

Signed-off-by: Guohan Lu <lguohan@gmail.com>

* [baseimage]: install same version for docker-ce and docker-ce-cli

Signed-off-by: Guohan Lu <lguohan@gmail.com>

* [FRR]: Update frr to latest 7.2.1-s3 (sonic-net#4294)

- Updated to latest frr 7.2.1 from the master.
- Updated patches accordingly

* [sonic-buildimage] updated minigraph for ACL Table data and ACL Interface Binding for Multi-NPU platforms (sonic-net#4491)

* [sonic-buildimage] updated minigraph for ACL Table data and ACL Interface
binding update for multu-npu platform based on subrole as "Frontend" or
"Backend". For backend npu no ACL table is associated. For frontend npu
only front-panel interface are associated.

Updated with test case and fix typo in sample-mingraph for npu

Address Review comments

Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>

* Fixed the logic as per preview comment. Interface Filter logic
only applies to Everflow/Mirror tables.

* Address Review Comments.

* Changes for LLDP docker to support multi-npu platforms (sonic-net#4530)

* Changes for LLDP for Multi NPU Platoforms:-
a) Enable LLDP for Host namespace for Management Port
b) Make sure Management IP is avaliable in per asic namespace
   needed for LLDP Chassis configuration
c) Make sure chassis mac-address is correct in per asic namespace
d) Do not run lldp on eth0 of per asic namespace and avoid chassis
   configuration for same
e) Use Linux hostname instead from Device Metadata for lldp chassis
   configuration since in multi-npu platforms device metadata hostname
   will be differnt

Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>

* Address Review Comment with following changes:
a) Use Device Metadata hostname even in per namespace conatiner.
   updated minigraph parsing for same to have hostname as system
   hostname and add new key for asic name

b) Minigraph changes to have MGMT_INTERFACE Key in per asic/namespace
   config also as needed for LLDP for setting chassis management IP.

Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>

* Address Review Comments

* Moved utility functions for multi-npu platforms from sonic-utilities to sonic_device_util.py (sonic-net#4559)

* Moved utility functions for multi-npu platforms from
sonic-utilities config/main.py to here so that they can be used
any module

* Fix the issue with test run during compilation with acl-uploader
PR#908 of sonic-utilities.

* Fix get_num_npu as it was retuning string and not int

* Address Review Comments

* Address Review Comments

* Fix for issue where image is compile with flag ENABLE_DHCP_GRAPH_SERVICE (sonic-net#4573)

and then we load image and reboot even if there was existing
config_db.json we will look for DHCP Service. we should disbale
update_graph in such cases. This behaviour is silimar to what we have in
201811 image.

* Change to enable redistribute connected on Frontend asics instead of backend asics (sonic-net#4588)

Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>

* [DellEMC] S6000 Disable Low power mode by default (sonic-net#4592)

* [BFN] Updated Barefoot SDK to 2020-05-07 (sonic-net#4566)

Signed-off-by: Andriy Kokhan <akokhan@barefootnetworks.com>

* [minigraph] Add tags for egress mirror tables (sonic-net#4526)

Signed-off-by: Danny Allen <daall@microsoft.com>

* [Submodule update] sonic-utlities with PR's
[201911][show] Fix abbreviations for 'show ip bgp ...' commands (sonic-net#909)
Changes to support acl-loader and mirror-session config commands for
multi-npu platforms. (sonic-net#908)
Changes to commands  config reload/load-minigraph (sonic-net#919)
Stop/Start restapi server upon config reload (sonic-net#911)
[config] Add 'interface transceiver' subgroup with 'lpmode' and
'reset' subcommands (sonic-net#904)

* [minigraph] Support FECDisabled in minigraph parser (sonic-net#4556) (sonic-net#4624)

Signed-off-by: Qi Luo <qiluo-msft@users.noreply.github.com>

* [ntp] enable/disable NTP long jump according to reboot type (sonic-net#4577)

* [ntp] enable/disable NTP long jump according to reboot type

- Enable NTP long jump after cold reboot.
- Disable NTP long jump after warrm/fast reboot.

Signed-off-by: Ying Xie <ying.xie@microsoft.com>

* fix typo

* further refactoring

* use sonic-db-cli instead

* [arista]: remove the soc property disabling sram scan (sonic-net#4623)

* Changes to support config-setup service for multi-npu (sonic-net#4609)

* Changes to support config-setup service for multi-npu
platforms. For Multi-npu we are not supporting as of
now config initializtion and ZTP. It will support creating
config db from minigraph or using  config db from previous
file system

Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>

* Address Review Comments.

* Address Review comments

* Address Review Comments of using pyhton based config load_minigraph/
config save/config reload from shell scripts so that we don't duplicate
code. Also while running from shell we will skip stop/start services
done by those commands.

* Updated to use python command so no code duplication.

* [config]: Fix the device  type and internal bgp session status for multi NPU platforms (sonic-net#4600)

* The following changes for multi-npu platforms are done
- Set the type in device_metadata for asic configuration to be same as host
- Set the admin-status of internal bgp sessions as up
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>

* Adding new BGP peer groups PEER_V4_INT and PEER_V6_INT.  (sonic-net#4620)

* Adding new BGP peer groups PEER_V4_INT and PEER_V6_INT. The internal BGP sessions
will be added to this peer group while the external BGP sessions will be added
to the exising PEER_V4 and PEER_V6 peer group.

* Check for "ASIC" keyword in the hostname to identify the internal neighbors.

* [submodule update] sonic-swss with PR
 [vnet] Fix IP2ME route creation logic for BITMAP VNET interface (sonic-net#1284)

* [submodule update] sonic-util
 Revert "[config] Add 'interface transceiver' subgroup with 'lpmode' and
 'reset' subcommands (sonic-net#904)"
  Multi-asic changes for config bgp commands and utilities. (sonic-net#910)

* [submodule update] sonic-rest API's
PR#39  Setup module versioning
Add support for get all Vlans (#37)

* Update golang version for 1.11.5 to 1.14.2 (sonic-net#4520)

Co-authored-by: Myron Sosyak <49795530+msosyak@users.noreply.github.com>
Co-authored-by: Srideep <srideep_devireddy@dell.com>
Co-authored-by: paavaanan <paavaanan_t_n@dell.com>
Co-authored-by: Guohan Lu <lguohan@gmail.com>
Co-authored-by: pavel-shirshov <pavelsh@microsoft.com>
Co-authored-by: abdosi <58047199+abdosi@users.noreply.github.com>
Co-authored-by: arlakshm <55814491+arlakshm@users.noreply.github.com>
Co-authored-by: Santhosh Kumar T <53558409+santhosh-kt@users.noreply.github.com>
Co-authored-by: Andriy Kokhan <43479230+akokhan@users.noreply.github.com>
Co-authored-by: Danny Allen <daall@microsoft.com>
Co-authored-by: Abhishek Dosi <abdosi@microsoft.com>
Co-authored-by: Qi Luo <qiluo-msft@users.noreply.github.com>
Co-authored-by: Ying Xie <yxieca@users.noreply.github.com>
Co-authored-by: Samuel Angebault <staphylo@arista.com>
Co-authored-by: judyjoseph <53951155+judyjoseph@users.noreply.github.com>
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Reviewers

@lguohan lguohan lguohan approved these changes

@jleveque jleveque jleveque approved these changes

@pavel-shirshov pavel-shirshov pavel-shirshov approved these changes

Assignees
No one assigned
Labels
Enhancement ➕ Included in 201911 Branch Request for 201911 Branch :shipit:
Projects
None yet
Milestone
No milestone
Development

Successfully merging this pull request may close these issues.
7 participants
@yxieca @daall @zhenggen-xu @lguohan @jleveque @pavel-shirshov @abdosi