Commit
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
[SNMP][IPv6]: Fix to use link local IPv6 address as snmp agentAddress (…
…sonic-net#16013) <!-- Please make sure you've read and understood our contributing guidelines: https://github.com/Azure/SONiC/blob/gh-pages/CONTRIBUTING.md ** Make sure all your commits include a signature generated with `git commit -s` ** If this is a bug fix, make sure your description includes "fixes #xxxx", or "closes #xxxx" or "resolves #xxxx" Please provide the following information: --> #### Why I did it fixes: sonic-net#16001 Caused by: sonic-net#15487 The above PR introduced change to use Management and Loopback Ipv4 and ipv6 addresses as snmpagent address in snmpd.conf file. With this change, if Link local IP address is configured as management or Loopback IPv6 address, then snmpd tries to open socket on that ipv6 address and fails with the below error: ``` Error opening specified endpoint "udp6:[fe80::5054:ff:fe6f:16f0]:161" Server Exiting with code 1 ``` From RFC4007, if we need to specify non-global ipv6 address without ambiguity, we need to use zone id along with the ipv6 address: <address>%<zone_id> Reference: https://datatracker.ietf.org/doc/html/rfc4007 ##### Work item tracking - Microsoft ADO **(number only)**: #### How I did it Modify snmpd.conf file to use the %zone_id representation for ipv6 address. #### How to verify it In VS testbed, modify config_db to use link local ipv6 address as management address: "MGMT_INTERFACE": { "eth0|10.250.0.101/24": { "forced_mgmt_routes": [ "172.17.0.1/24" ], "gwaddr": "10.250.0.1" }, "eth0|fe80::5054:ff:fe6f:16f0/64": { "gwaddr": "fe80::1" } }, Execute config_reload after the above change. snmpd comes up and check if snmpd is listening on ipv4 and ipv6 addresses: ``` admin@vlab-01:~$ sudo netstat -tulnp | grep 161 tcp 0 0 127.0.0.1:3161 0.0.0.0:* LISTEN 274060/snmpd udp 0 0 10.1.0.32:161 0.0.0.0:* 274060/snmpd udp 0 0 10.250.0.101:161 0.0.0.0:* 274060/snmpd udp6 0 0 fc00:1::32:161 :::* 274060/snmpd udp6 0 0 fe80::5054:ff:fe6f::161 :::* 274060/snmpd -- Link local admin@vlab-01:~$ sudo ifconfig eth0 eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 10.250.0.101 netmask 255.255.255.0 broadcast 10.250.0.255 inet6 fe80::5054:ff:fe6f:16f0 prefixlen 64 scopeid 0x20<link> ether 52:54:00:6f:16:f0 txqueuelen 1000 (Ethernet) RX packets 36384 bytes 22878123 (21.8 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 261265 bytes 46585948 (44.4 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 admin@vlab-01:~$ docker exec -it snmp snmpget -v2c -c public fe80::5054:ff:fe6f:16f0 1.3.6.1.2.1.1.1.0 iso.3.6.1.2.1.1.1.0 = STRING: "SONiC Software Version: SONiC.master.327516-04a6031b2 - HwSku: Force10-S6000 - Distribution: Debian 11.7 - Kernel: 5.10.0-18-2-amd64" ``` Logs from snmpd: ``` Turning on AgentX master support. NET-SNMP version 5.9 Connection from UDP/IPv6: [fe80::5054:ff:fe6f:16f0%eth0]:44308 ``` Ran test_snmp_loopback test to check if loopback ipv4 and ipv6 works: ``` ./run_tests.sh -n vms-kvm-t0 -d vlab-01 -c snmp/test_snmp_loopback.py -f vtestbed.yaml -i ../ansible/veos_vtb -e "--skip_sanity --disable_loganalyzer" -u === Running tests in groups === Running: pytest snmp/test_snmp_loopback.py --inventory ../ansible/veos_vtb --host-pattern vlab-01 --testbed vms-kvm-t0 --testbed_file vtestbed.yaml --log-cli-level warning --log-file-level debug --kube_master unset --showlocals --assert plain --show-capture no -rav --allow_recover --ignore=ptftests --ignore=acstests --ignore=saitests --ignore=scripts --ignore=k8s --ignore=sai_qualify --junit-xml=logs/tr.xml --log-file=logs/test.log --skip_sanity --disable_loganalyzer .. snmp/test_snmp_loopback.py::test_snmp_loopback[vlab-01] PASSED ``` <!-- If PR needs to be backported, then the PR must be tested against the base branch and the earliest backport release branch and provide tested image version on these two branches. For example, if the PR is requested for master, 202211 and 202012, then the requester needs to provide test results on master and 202012. --> #### Which release branch to backport (provide reason below if selected) <!-- - Note we only backport fixes to a release branch, *not* features! - Please also provide a reason for the backporting below. - e.g. - [x] 202006 --> - [ ] 201811 - [ ] 201911 - [ ] 202006 - [x] 202012 - [x] 202106 - [x] 202111 - [x] 202205 - [x] 202211 - [x] 202305 #### Tested branch (Please provide the tested image version) <!-- - Please provide tested image version - e.g. - [x] 20201231.100 --> - [ ] <!-- image version 1 --> - [ ] <!-- image version 2 --> #### Description for the changelog <!-- Write a short (one line) summary that describes the changes in this pull request for inclusion in the changelog: --> <!-- Ensure to add label/tag for the feature raised. example - PR#2174 under sonic-utilities repo. where, Generic Config and Update feature has been labelled as GCU. --> #### Link to config_db schema for YANG module changes <!-- Provide a link to config_db schema for the table for which YANG model is defined Link should point to correct section on https://github.com/Azure/sonic-buildimage/blob/master/src/sonic-yang-models/doc/Configuration.md --> #### A picture of a cute animal (not mandatory but encouraged)
- Loading branch information