Edit docs/configuring-playbook-bridge-hookshot.md and two other docum…

…ents about installing instruction (#3886)

* Edit docs/configuring-playbook-bridge-hookshot.md: fix anchor links to "main.yml"

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

* Edit docs/configuring-playbook-bridge-hookshot.md: create "Adjusting the playbook configuration" section

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

* Edit docs/configuring-playbook-bridge-hookshot.md: split "End-to-bridge encryption" section

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

* Edit docs/configuring-playbook-bridge-hookshot.md: remove two items from the list

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

* Edit docs/configuring-playbook-bridge-hookshot.md: move "matrix_hookshot_github_private_key" to the playbook configuration adjustment section

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

* Edit docs/configuring-playbook-bridge-hookshot.md: create the "Installing" section

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

* Edit docs/configuring-playbook-bridge-hookshot.md: create the "extending the configuration" section

This follows fea8df5.

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

* Edit docs/configuring-playbook-bridge-hookshot.md: add a blank line

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

* Edit docs/configuring-playbook-bridge-hookshot.md: clarify when it is needed to download the private key file of a GitHub app

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

* Edit docs/configuring-playbook-bridge-hookshot.md: edit the instruction to add configuration to vars.yml file

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

* Edit docs/configuring-playbook-bridge-hookshot.md: replace "Important" with "Note"

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

* Edit docs/configuring-playbook-bridge-hookshot.md: capitalization

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

* Edit docs/configuring-playbook-bridge-hookshot.md: use the common instruction for sending a message for the help menu

Follow docs/configuring-playbook-bridge-postmoogle.md

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

* Edit docs/configuring-playbook-bridge-hookshot.md: small edits

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

* Edit installing instructions: replace setup-SERVICE with setup-all along with just shortcuts with "install-service"

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

* Edit docs/configuring-playbook-bridge-hookshot.md: add optional label to GitHub private key instruction

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

---------

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
Co-authored-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

docs/configuring-playbook-bridge-hookshot.md

@@ -2,74 +2,110 @@
 
 The playbook can install and configure [matrix-hookshot](https://github.com/matrix-org/matrix-hookshot) for you.
 
-Hookshot can bridge [Webhooks](https://en.wikipedia.org/wiki/Webhook) from software project management services such as GitHub, GitLab, JIRA, and Figma, as well as generic webhooks.
+Hookshot can bridge [Webhooks](https://en.wikipedia.org/wiki/Webhook) from software project management services such as GitHub, GitLab, Jira, and Figma, as well as generic webhooks.
 
 See the project's [documentation](https://matrix-org.github.io/matrix-hookshot/latest/hookshot.html) to learn what it does and why it might be useful to you.
 
 **Note**: the playbook also supports [matrix-appservice-webhooks](configuring-playbook-bridge-appservice-webhooks.md), which however was deprecated by its author.
 
-## Setup Instructions
+## Prerequisites
 
-Refer to the [official instructions](https://matrix-org.github.io/matrix-hookshot/latest/setup.html) to learn what the individual options do.
+### Download GitHub app private key (optional)
 
-1. Enable the bridge by adding `matrix_hookshot_enabled: true` to your `vars.yml` file
-2. For each of the services (GitHub, GitLab, Jira, Figma, generic webhooks) fill in the respective variables `matrix_hookshot_service_*` listed in [main.yml](/roles/custom/matrix-bridge-hookshot/defaults/main.yml) as required.
-3. Take special note of the `matrix_hookshot_*_enabled` variables. Services that need no further configuration are enabled by default (GitLab, Generic), while you must first add the required configuration and enable the others (GitHub, Jira, Figma).
-4. If you're setting up the GitHub bridge, you'll need to generate and download a private key file after you created your GitHub app. Copy the contents of that file to the variable `matrix_hookshot_github_private_key` so the playbook can install it for you, or use one of the [other methods](#manage-github-private-key-with-aux-role) explained below.
-5. If you've already installed Matrix services using the playbook before, you'll need to re-run it (`--tags=setup-all,start`). If not, proceed with [configuring other playbook services](configuring-playbook.md) and then with [Installing](installing.md). Get back to this guide once ready. Hookshot can be set up individually using the tag `setup-hookshot`.
+If you're setting up the GitHub bridge, you need to create your GitHub app, and generate a private key file of it.
 
-Other configuration options are available via the `matrix_hookshot_configuration_extension_yaml` and `matrix_hookshot_registration_extension_yaml` variables, see the comments in [main.yml](/roles/custom/matrix-bridge-hookshot/defaults/main.yml) for how to use them.
+You need to download the private key file, if you will install the file manually or with the `aux` role. For details, see [the section below](#manage-github-private-key-with-aux-role).
 
-Finally, run the playbook (see [installing](installing.md)).
+## Adjusting the playbook configuration
 
-### End-to-bridge encryption
+Add the following configuration to your `inventory/host_vars/matrix.example.com/vars.yml` file. Make sure to replace `GITHUB_PRIVATE_KEY_HERE` with the one created [above](#download-github-app-private-key).
 
-You can enable [encryption](https://matrix-org.github.io/matrix-hookshot/latest/advanced/encryption.html) for Hookshot by adding `matrix_hookshot_encryption_enabled: true` to your configuration (`vars.yml`) and [executing the playbook](installing.md) again.
+```yaml
+matrix_hookshot_enabled: true
+
+# Uncomment to enable end-to-bridge encryption.
+# See: https://matrix-org.github.io/matrix-hookshot/latest/advanced/encryption.html
+# matrix_hookshot_experimental_encryption_enabled: true
+
+# Uncomment and paste the contents of GitHub app private key to enable GitHub bridge.
+# Alternatively, you can use one of the other methods explained below on the "Manage GitHub Private Key with aux role" section.
+# matrix_hookshot_github_private_key: "GITHUB_PRIVATE_KEY_HERE"
+```
+
+For each of the services (GitHub, GitLab, Jira, Figma, and generic webhooks) fill in the respective variables `matrix_hookshot_service_*` listed in [main.yml](../roles/custom/matrix-bridge-hookshot/defaults/main.yml) as required.
+
+Take special note of the `matrix_hookshot_*_enabled` variables. Services that need no further configuration are enabled by default (GitLab and generic webhooks), while you must first add the required configuration and enable the others (GitHub, Jira, and Figma).
+
+### Extending the configuration
+
+You can configure additional options by adding the `matrix_hookshot_configuration_extension_yaml` and `matrix_hookshot_registration_extension_yaml` variables.
+
+Refer the [official instructions](https://matrix-org.github.io/matrix-hookshot/latest/setup.html) and the comments in [main.yml](../roles/custom/matrix-bridge-hookshot/defaults/main.yml) to learn what the individual options do.
+
+## Installing
 
-Should the crypto store be corrupted, you can reset it by executing this Ansible playbook with the tag `reset-hookshot-encryption` added, for example `ansible-playbook -i inventory/hosts setup.yml --tags=reset-hookshot-encryption`.
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
+
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
+```
+
+The shortcut commands with the [`just` program](just.md) are also available: `just install-service hookshot` or `just setup-all`
+
+`just install-service hookshot` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note `just setup-all` runs the `ensure-matrix-users-created` tag too.
 
 ## Usage
 
 To use the bridge, you need to create a room and invite the Hookshot bot (`@hookshot:example.com`) to it.
 
 Make sure the bot is able to send state events (usually the Moderator power level in clients).
 
-Send a `!hookshot help` message to see a list of help commands.
+Send `!hookshot help` to the room to see the bridge's help menu for additional commands.
 
 Refer to [Hookshot's documentation](https://matrix-org.github.io/matrix-hookshot/latest/usage.html) for more details about using the bridge's various features.
 
-**Important**: Note that the different listeners are bound to certain paths which might differ from those assumed by the hookshot documentation, see [URLs for bridges setup](#urls-for-bridges-setup) below.
+💡 **Note**: the different listeners are bound to certain paths which might differ from those assumed by the hookshot documentation. See [URLs for bridges setup](#urls-for-bridges-setup) below.
+
+### Reset crypto store
+
+Should the crypto store be corrupted, you can reset it by executing this Ansible playbook with the tag `reset-hookshot-encryption` added:
+
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=reset-hookshot-encryption
+```
 
 ## More setup documentation
 
 ### URLs for bridges setup
 
 Unless indicated otherwise, the following endpoints are reachable on your `matrix.` subdomain (if the feature is enabled).
 
-| listener | default path | variable | used as |
+| Listener | Default path | Variable | Used as |
 |---|---|---|---|
 | - | `/hookshot/webhooks/` | `matrix_hookshot_webhook_endpoint` | Webhook-prefix, which affects all webhook-related URLs below |
 | generic | `/hookshot/webhooks/webhook` | `matrix_hookshot_generic_endpoint` | Generic webhooks |
 | github oauth | `/hookshot/webhooks/oauth` | `matrix_hookshot_github_oauth_endpoint` | GitHub "Callback URL" |
-| jira oauth | `/hookshot/webhooks/jira/oauth` | `matrix_hookshot_jira_oauth_endpoint` | JIRA OAuth |
+| jira oauth | `/hookshot/webhooks/jira/oauth` | `matrix_hookshot_jira_oauth_endpoint` | Jira OAuth |
 | figma endpoint | `/hookshot/webhooks/figma/webhook` | `matrix_hookshot_figma_endpoint` | Figma |
 | provisioning | `/hookshot/v1/` | `matrix_hookshot_provisioning_endpoint` | Dimension [provisioning](#provisioning-api) |
 | appservice | `/hookshot/_matrix/app/` | `matrix_hookshot_appservice_endpoint` | Matrix server |
 | widgets | `/hookshot/widgetapi/` | `matrix_hookshot_widgets_endpoint` | Widgets |
 | metrics | `/metrics/hookshot` | `matrix_hookshot_metrics_enabled` and exposure enabled via `matrix_hookshot_metrics_proxying_enabled` or `matrix_metrics_exposure_enabled`. Read more in the [Metrics section](#metrics) below. | Prometheus |
 
-Also see the various `matrix_hookshot_container_labels_*` variables in [main.yml](/roles/custom/matrix-bridge-hookshot/defaults/main.yml), which expose URLs publicly.
+Also see the various `matrix_hookshot_container_labels_*` variables in [main.yml](../roles/custom/matrix-bridge-hookshot/defaults/main.yml), which expose URLs publicly
 
-The different listeners are also reachable *internally* in the docker-network via the container's name (configured by `matrix_hookshot_container_url`) and on different ports (e.g. `matrix_hookshot_appservice_port`). Read [main.yml](/roles/custom/matrix-bridge-hookshot/defaults/main.yml) in detail for more info.
+The different listeners are also reachable *internally* in the docker-network via the container's name (configured by `matrix_hookshot_container_url`) and on different ports (e.g. `matrix_hookshot_appservice_port`). Read [main.yml](../roles/custom/matrix-bridge-hookshot/defaults/main.yml) in detail for more info.
 
 ### Manage GitHub Private Key with aux role
 
 The GitHub bridge requires you to install a private key file. This can be done in multiple ways:
-- copy the *contents* of the downloaded file and set the variable `matrix_hookshot_github_private_key` to the contents (see example in [main.yml](/roles/custom/matrix-bridge-hookshot/defaults/main.yml)).
+
+- copy the *contents* of the downloaded file and set the variable `matrix_hookshot_github_private_key` to the contents (see example in [main.yml](../roles/custom/matrix-bridge-hookshot/defaults/main.yml)).
 - somehow copy the file to the path `{{ matrix_hookshot_base_path }}/{{ matrix_hookshot_github_private_key_file }}` (default: `/matrix/hookshot/private-key.pem`) on the server manually.
 - use the [`aux` role](https://github.com/mother-of-all-self-hosting/ansible-role-aux) to copy the file from an arbitrary path on your ansible client to the correct path on the server.
 
-To use the `aux` role, make sure the `matrix_hookshot_github_private_key` variable is empty. Then add the following additional configuration:
+To use the `aux` role, make sure the `matrix_hookshot_github_private_key` variable is empty. Then add the following configuration to your `inventory/host_vars/matrix.example.com/vars.yml` file:
 
 ```yaml
 aux_file_definitions:

docs/configuring-playbook-email2matrix.md

@@ -84,16 +84,17 @@ Refer to the official documentation [here](https://github.com/devture/email2matr
 
 ## Installing
 
-To enable Email2Matrix, run the playbook with [playbook tags](playbook-tags.md) as below:
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
 
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
 ```sh
-ansible-playbook -i inventory/hosts setup.yml --tags=setup-email2matrix,start
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 ```
 
 **Notes**:
 
-- The shortcut commands with the [`just` program](just.md) are also available: `just run-tags setup-email2matrix,start` or `just setup-all`
+- The shortcut commands with the [`just` program](just.md) are also available: `just install-service email2matrix` or `just setup-all`
 
-  `just run-tags setup-email2matrix,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note `just setup-all` runs the `ensure-matrix-users-created` tag too.
+  `just install-service email2matrix` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note `just setup-all` runs the `ensure-matrix-users-created` tag too.
 
 - After installation, you may wish to send a test email to the email address assigned to `mailbox1` (default: `mailbox1@matrix.example.com`) to make sure that Email2Matrix works as expected.

docs/configuring-playbook-user-verification-service.md

@@ -87,15 +87,16 @@ This will instruct UVS to verify the OpenID token against any domain given in a
 
 ## Installing
 
-After these variables have been set, run the playbook with [playbook tags](playbook-tags.md) as below to restart UVS:
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
 
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
 ```sh
-ansible-playbook -i inventory/hosts setup.yml --tags=setup-matrix-user-verification-service,start
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 ```
 
-The shortcut commands with the [`just` program](just.md) are also available: `just run-tags setup-matrix-user-verification-service,start` or `just setup-all`
+The shortcut commands with the [`just` program](just.md) are also available: `just install-service matrix-user-verification-service` or `just setup-all`
 
-`just run-tags setup-matrix-user-verification-service,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note `just setup-all` runs the `ensure-matrix-users-created` tag too.
+`just install-service matrix-user-verification-service` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note `just setup-all` runs the `ensure-matrix-users-created` tag too.
 
 ## Logging