Merge pull request #14 from joelsa/add-is42s32400f

Add is42s32400f to devices

src/devices/is42s32400f.rs

@@ -0,0 +1,57 @@
+/// ISI IS42S32400F SDRAM
+#[allow(unused)]
+
+/// Speed Grade 6
+pub mod is42s32400f_6 {
+    use crate::sdram::{SdramChip, SdramConfiguration, SdramTiming};
+
+    const BURST_LENGTH_1: u16 = 0x0000;
+    const BURST_LENGTH_2: u16 = 0x0001;
+    const BURST_LENGTH_4: u16 = 0x0002;
+    const BURST_LENGTH_8: u16 = 0x0004;
+    const BURST_TYPE_SEQUENTIAL: u16 = 0x0000;
+    const BURST_TYPE_INTERLEAVED: u16 = 0x0008;
+    const CAS_LATENCY_2: u16 = 0x0020;
+    const CAS_LATENCY_3: u16 = 0x0030;
+    const OPERATING_MODE_STANDARD: u16 = 0x0000;
+    const WRITEBURST_MODE_PROGRAMMED: u16 = 0x0000;
+    const WRITEBURST_MODE_SINGLE: u16 = 0x0200;
+
+    /// Is42s32400f with Speed Grade 6
+    #[derive(Clone, Copy, Debug, PartialEq)]
+    pub struct Is42s32400f6 {}
+
+    impl SdramChip for Is42s32400f6 {
+        /// Value of the mode register
+        const MODE_REGISTER: u16 = BURST_LENGTH_1
+            | BURST_TYPE_SEQUENTIAL
+            | CAS_LATENCY_3
+            | OPERATING_MODE_STANDARD
+            | WRITEBURST_MODE_SINGLE;
+
+        /// Timing Parameters
+        const TIMING: SdramTiming = SdramTiming {
+            startup_delay_ns: 100_000,    // 100 µs
+            max_sd_clock_hz: 100_000_000, // 100 MHz
+            refresh_period_ns: 15_625,    // 64ms / (4096 rows) = 15625ns
+            mode_register_to_active: 2,   // tMRD = 2 cycles
+            exit_self_refresh: 7,         // tXSR = 70ns
+            active_to_precharge: 4,       // tRAS = 42ns
+            row_cycle: 6,                 // tRC = 60ns
+            row_precharge: 2,             // tRP = 18ns
+            row_to_column: 2,             // tRCD = 18ns
+        };
+
+        /// SDRAM controller configuration
+        const CONFIG: SdramConfiguration = SdramConfiguration {
+            column_bits: 8,
+            row_bits: 12,
+            memory_data_width: 32, // 32-bit
+            internal_banks: 4,     // 4 internal banks
+            cas_latency: 3,        // CAS latency = 3
+            write_protection: false,
+            read_burst: true,
+            read_pipe_delay_cycles: 0,
+        };
+    }
+}