Add begin and end APIs

README.md

@@ -6,19 +6,21 @@ Arduino library to support the STTS22H digital temperature sensor
 This sensor uses I2C to communicate.
 For I2C it is then required to create a TwoWire interface before accessing to the sensors:  
 
-    dev_i2c = new TwoWire(I2C_SDA, I2C_SCL);  
-    dev_i2c->begin();
+    TwoWire dev_i2c(I2C_SDA, I2C_SCL);  
+    dev_i2c.begin();
 
-An instance can be created and enbaled when the I2C bus is used following the procedure below:  
+An instance can be created and enabled when the I2C bus is used following the procedure below:  
 
-    Temp = new STTS22HSensor(dev_i2c);  
-    Temp->Enable();
+    STTS22HSensor Temp(&dev_i2c);
+    Temp.begin();	
+    Temp.Enable();
 
 The access to the sensor values is done as explained below:  
 
   Read temperature.  
 
-    Temp->GetTemperature(&temperature);
+    float temperature;
+    Temp.GetTemperature(&temperature);
 
 ## Documentation
 

keywords.txt

@@ -12,6 +12,8 @@ STTS22HSensor	KEYWORD1
 # Methods and Functions (KEYWORD2)
 #######################################
 
+begin	KEYWORD2
+end	KEYWORD2
 ReadID	KEYWORD2
 Enable	KEYWORD2
 Disable	KEYWORD2

library.properties

@@ -1,5 +1,5 @@
 name=STM32duino STTS22H
-version=1.0.1
+version=2.0.0
 author=SRA
 maintainer=stm32duino
 sentence=digital temperature sensor.

src/STTS22HSensor.cpp

@@ -52,31 +52,54 @@ STTS22HSensor::STTS22HSensor(TwoWire *i2c, uint8_t address) : dev_i2c(i2c), addr
   reg_ctx.write_reg = STTS22H_io_write;
   reg_ctx.read_reg = STTS22H_io_read;
   reg_ctx.handle = (void *)this;
+  temp_is_enabled = 0U;
+}
 
+/**
+ * @brief  Configure the sensor in order to be used
+ * @retval 0 in case of success, an error code otherwise
+ */
+STTS22HStatusTypeDef STTS22HSensor::begin()
+{
   /* Set default ODR */
   temp_odr = 1.0f;
 
   /* Enable BDU */
   if(stts22h_block_data_update_set(&reg_ctx, PROPERTY_ENABLE) != STTS22H_OK)
   {
-    return;
+    return STTS22H_ERROR;
   }
 
   /* Enable Automatic Address Increment */
   if(stts22h_auto_increment_set(&reg_ctx, PROPERTY_ENABLE) != STTS22H_OK)
   {
-    return;
+    return STTS22H_ERROR;
   }
 
   /* Put the component in standby mode. */
   if (stts22h_temp_data_rate_set(&reg_ctx, STTS22H_POWER_DOWN) != STTS22H_OK)
   {
-    return;
+    return STTS22H_ERROR;
   }
 
-  temp_is_enabled = 0;
-
-  return;
+  temp_is_enabled = 0U;
+
+  return STTS22H_OK;
+}
+
+/**
+ * @brief  Disable the sensor and relative resources
+ * @retval 0 in case of success, an error code otherwise
+ */
+STTS22HStatusTypeDef STTS22HSensor::end()
+{
+  /* Disable temperature sensor */
+  if (Disable() != STTS22H_OK)
+  {
+    return STTS22H_ERROR;
+  }
+
+  return STTS22H_OK;
 }
 
 /**
@@ -116,7 +139,7 @@ STTS22HStatusTypeDef STTS22HSensor::Enable()
     return STTS22H_ERROR;
   }
 
-  temp_is_enabled = 1;
+  temp_is_enabled = 1U;
 
   return STTS22H_OK;
 }
@@ -145,7 +168,7 @@ STTS22HStatusTypeDef STTS22HSensor::Disable()
     return STTS22H_ERROR;
   }
 
-  temp_is_enabled = 0;
+  temp_is_enabled = 0U;
 
   return STTS22H_OK;
 }

src/STTS22HSensor.h

@@ -69,6 +69,8 @@ class STTS22HSensor
 {
   public:
     STTS22HSensor(TwoWire *i2c, uint8_t address=STTS22H_I2C_ADD_H);
+    STTS22HStatusTypeDef begin();
+    STTS22HStatusTypeDef end();
     STTS22HStatusTypeDef ReadID(uint8_t *Id);
     STTS22HStatusTypeDef Enable();
     STTS22HStatusTypeDef Disable();