Skip to content

subslice/swanky-node

 
 

Repository files navigation

Swanky Node 😎

Swanky node is a Substrate based blockchain configured to enable pallet-contracts (a smart contract module) and more features to help WASM smart contract development locally.

Features

  • pallet-contracts (polkadot-0.9.39).
  • grandpa & aura consensus were removed. Instead, instant-seal/manual-seal & delayed-finalize are used. Blocks are sealed (1) as soon as a transaction get in the pool (2) when engine_createBlock RPC called. Blocks are finalized configured delay sec after blocks are sealed.
  • pallet-dapps-staking and ChainExtension to interact with it.
  • pallet-assets.
  • Pallet-assets chain-extension
  • dApps-staking chain-extension

Swanky Node is optimized for local development, while removing unnecessary components such as P2P. Additional features and pallets, such as to interact between (Contract <-> Runtime), will be added in the future.

Compatible ink! version

ink! v4.2.0 or lower is supported by pallet-contract polkadot-0.9.39 branch.

Installation

Download Binary

The easiest method of installation is by downloading and executing a precompiled binary from the Release Page

Build Locally

If you would like to build the source locally, you should first complete the basic Rust setup instructions. Once Rust is installed and configured, you will be able to build the node with:

cargo build --release

Embedded Docs 📖

Once the project has been built, the following command can be used to explore all parameters and subcommands:

./target/release/swanky-node -h

Usage

This command will start the single-node development chain with a persistent state.

./target/release/swanky-node

If you would prefer to run the node in non-persistent mode, use tmp option.

./target/release/swanky-node --tmp
# or
./target/release/swanky-node --dev

Purge the development chain's state.

./target/release/swanky-node purge-chain

The alice development account will be the authority and sudo account as declared in the genesis state. While at the same time, the following accounts will be pre-funded:

  • Alice
  • Bob
  • Charlie
  • Dave
  • Eve
  • Ferdie
  • Alice//stash
  • Bob//stash
  • Charlie//stash
  • Dave//stash
  • Eve//stash
  • Ferdie//stash

Show only Errors and Contract Debug Output

To print errors and contract debug output to the console log, supply -lerror,runtime::contracts=debug when starting the node.

-lerror,runtime::contracts=debug

Important: Debug output is only printed for RPC calls or off-chain tests ‒ not for transactions.

See the ink! FAQ for more details: How do I print something to the console from the runtime?.

Connect with Polkadot-JS Apps Front-end

Once the Swanky Node is running locally, you will be able to connect to it from the Polkadot-JS Apps front-end, in order to interact with your chain. Click here connecting the Apps to your local Swanky Node.

Run in Docker

First, install Docker and Docker Compose.

Then run the following command to start a single node development chain.

mkdir .local # this is mounted by container
./scripts/docker_run.sh

This command will compile the code, and then start a local development network. You can also replace the default command (cargo build --release && ./target/release/swanky-node --dev --ws-external) by appending your own. A few useful commands are shown below:

# Run Substrate node without re-compiling
./scripts/docker_run.sh ./target/release/swanky-node --ws-external

# Purge the local dev chain
./scripts/docker_run.sh ./target/release/swanky-node purge-chain

# Check whether the code is compilable
./scripts/docker_run.sh cargo check

Consensus (Manual Seal & Instant Seal)

Unlike other blockchains, Swanky Node adopts block authoring and finality gadgets referred to as Manual Seal and Instant Seal, consensus mechanisms suitable for contract development and testing.

Manual seal - Blocks are authored whenever RPC is called. Instant seal - Blocks are authored as soon as transactions enter the pool, most often resulting in one transaction per block.

Swanky Node enables both Manual seal and Instant seal.

Manual Sealing via RPC call

We can tell the node to author a block by calling the engine_createBlock RPC.

$ curl http://localhost:9933 -H "Content-Type:application/json;charset=utf-8" -d   '{
     "jsonrpc":"2.0",
      "id":1,
      "method":"engine_createBlock",
      "params": [true, false, null]
    }'

Params

  • Create Empty create_empty is a Boolean value indicating whether empty blocks may be created. Setting create-empty to true does not mean that an empty block will necessarily be created. Rather, it means that the engine should go ahead creating a block even if no transactions are present. If transactions are present in the queue, they will be included regardless of the value of create_empty.

  • Finalize finalize is a Boolean value indicating whether the block (and its ancestors, recursively) should be finalized after creation.

  • Parent Hash parent_hash is an optional hash of a block to use as a parent. To set the parent, use the format "0x0e0626477621754200486f323e3858cd5f28fcbe52c69b2581aecb622e384764". To omit the parent, use null. When the parent is omitted the block will be built on the current best block. Manually specifying the parent is useful for constructing fork scenarios, and demonstrating chain reorganizations.

Finalizing Blocks Manually

In addition to finalizing blocks at the time of creating them, they may also be finalized later by using the RPC call engine_finalizeBlock.

$ curl http://localhost:9933 -H "Content-Type:application/json;charset=utf-8" -d   '{
     "jsonrpc":"2.0",
      "id":1,
      "method":"engine_finalizeBlock",
      "params": ["0x0e0626477621754200486f323e3858cd5f28fcbe52c69b2581aecb622e384764", null]
    }'

Consensus (Delayed Finalize)

By default, either manual or instant seal does not result in block finalization unless the engine_finalizeBlock RPC is executed. However, it is possible to configure the finalization of sealed blocks to occur after a certain amount of time by setting the --finalize-delay-sec option to a specific value, which specifies the number of seconds to delay before finalizing the blocks.

./target/release/swanky-node --finalize-delay-sec 5

In the above example, a setting of 5 seconds would result in the blocks being finalized five seconds after being sealed. In contrast, setting the value to 0 would lead to instant finalization, with the blocks being finalized immediately upon being sealed.

About

No description, website, or topics provided.

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Rust 99.5%
  • Shell 0.5%