A language for hardcoding algorithms with pipelines and parallelism into FPGA hardware
Quick links:
- To set up Silice, see the getting started guide.
- To see what can be done with Silice, check out the example projects (all are available in this repo).
- To start designing hardware, see learn Silice.
- Watch the introduction video on programming FPGAs with Silice (youtube).
- Watch the video on the IceV-dual, a dual core RV32I riscv processor included in this repo.
- Browse the slides and watch the video on the doomchip-onice, a GPU for Doom 1993 written in Silice.
- Browse through the reference documentation.
- Feel free to ask questions about the language syntax in this github issue.
- Refer to the optimization guidelines for fine tuning your Silice designs.
- Read how to add a new board in the Silice build system.
- See details about the license.
Important: Silice is under active development read more.
Important: To enjoy the latest features please use the draft branch. Read more about development branches.
Important: Something no longer compiles? The change log documents (rare) breaking changes and how to recover from them.
Silice is an easy-to-learn, powerful hardware description language, that allows both to prototype ideas quickly and then refine designs to be compact and efficient.
Silice achieves this by offering a few, carefully designed high level design primitives atop a low level description language. In particular, Silice allows to write and combine algorithms, pipelines and per-cycle logic in a coherent, unified way. It features a powerful instantiation-time pre-processor, making it easy to describe parametric designs.
Silice offers a ready-to-go design environment, supporting many FPGA boards, both open-source and proprietary. It natively supports simulation and formal verification.
Silice syntax is simple, explicit and easy to read, and should feel familiar to C programmers and Verilog designers alike.
Silice comes with a ton of examples, from a simple blinky to SDRAM controllers, tiny RISCV CPUs (dual core RV32I in less than 120 lines!) and a GPU capable of rendering Doom and Quake levels on low cost, low power FPGAs. Examples include full hardware re-implementations of the render loops of Comanche 1992 and Doom 1993. Many basic components are available in the repository to get you started on your designs (VGA, HDMI, OLED, UART, SDRAM, SDCARD and SPIflash controllers).
The build system already supports many popular boards such as the IceBreaker, de10-nano, ULX3S, Fomu and IceStick. Silice works great with the open-source FPGA toolchain (yosys/nextpnr/icestorm), see our Ice40 and ECP5 examples.
You do not need an FPGA to start with Silice: designs and their outputs (e.g. VGA signals) can be simulated and visualized.
While I developed Silice for my own needs, I hope you'll find it useful for your projects!
Checkout the Silice mega-tutorial (still being written).
(see also the full blinky tutorial)
1 algorithm main(output uint8 led) {
2 uint28 counter = 0; // a 28 bits unsigned integer
3 led := counter[20,8]; // LEDs updated every clock with the 8 most significant bits
4 while (1) { // forever
5 counter = counter + 1; // increment counter
6 }
7 }cd projects
cd blinky
make mojov3
Line 1 is the entry point of any Silice hardware: the main algorithm. Line 2 we define a 28-bit unsigned int, initialized to 0. Initializers are mandatory and are always constants. Line 3 we request that the output led tracks the eight most significant bits of the counter variable. The syntax [20,8] means 8 bits wide starting from bit 20. The assignment to led uses the := operator which is an always assignment: led is now automatically updated with counter after each rising clock. Such assignments have to appear at the top of an algorithm, right before any other instruction.
Finally, lines 4-6 define the infinite loop that increments the counter. Of course the 28 bit counter will ultimately overflow and go back to 0, hence the cyclic LED light pattern. In this case, the loop takes exactly one cycle to execute: we have one increment per cycle at 50 MHz (the clock frequency of the Mojo v3).
We then compile with silice. The -f parameter indicates which framework to use: this is an FPGA platform dependent wrapper code. Here we are using the Mojo framework with LEDs only. Several other frameworks are provided, and it is easy to write your own.
The -o parameter indicates where to write the Verilog output. In this example we overwrite the main file of a pre-existing project, which is then compiled using Xilinx ISE toolchain. Fear not, we also have examples working with yosys, nextpnr and project icestorm!
Here is another small example outlining a core principle of Silice:
1 algorithm main() {
2 brom int12 sintbl[4096] = {...}
3 ...
4 while (1) { // render loop
5 // get cos/sin view
6 sintbl.addr = (viewangle) & 4095;
7 ++:
8 sinview = sintbl.rdata;
9 sintbl.addr = (viewangle + 1024) & 4095;
10 ++:
11 cosview = sintbl.rdata;
12 ...This code is storing a sine table in a block ROM and accesses it to obtain a cosine and sine for the current view angle. Note the use of the ++: step operator in lines 7 and 10. This explicitly splits the exectution flow and introduces a one cycle delay, here waiting for the brom to output its result in field rdata for the select address in addr. Anything in between is considered combinational; for instance lines 8 and 9 are evaluated in parallel on hardware, as they each produce two pieces of independent circuitry.
This repo contains many example projects, some including detailed code walkthrough:
See the getting started guide. Silice runs great on Windows, Linux, and macOS! To start writing code, see writing your first design. To see what can be done with Silice, check out our example projects (all are available in this repo).
Silice can already be used to create non trivial designs, from a tiny Risc-V processor to an entire game render loop (visit the examples page).
However Silice is under active development. I decided to open the repo so everyone can join in the fun, but it is not yet stable and feature complete. Some documentation is lacking, some examples are outdated or far from polished, and known issues do exist (head out to the Issues page).
I am extremely attached to backward compatibility, and work very hard to avoid breaking changes. Some adjustments are however sometimes necessary. If something no longer works please check the change log, and feel free to reach out for help.
I hope you'll enjoy diving into Silice, and that you will find it useful. Please let me know your thoughts: comments and contributions are welcome!
- master is the latest, most stable version
- wip is where new features are being implemented, less stable but reasonnable
- draft is heavy experimental work in progress, likely unstable, may not compile
- learn-silice contains documentation and tutorials
- projects contains many demo projects (see README therein) as well as build scripts for several boards
- bin contains the Silice binaries after compiling using the
compile_silice_*.shscript - frameworks contains the frameworks for various boards and setups
- tools contains tools useful for Silice development, either source or binary form (to be installed, see getting started)
- src contains Silice core source code
- antlr contains Silice grammar and parsing related source code
- tests contains test scripts for Silice development
GPLv3 (Silice compiler) and MIT (examples and glue code), but please refer to the dedicated page.
- Silice logo by Pierre-Alexandre Hugron (Twitter)