DEPRECATION WARNING

This addon should not be used anymore! It will be replaced with home-assistant-matter-hub.

The project is currently in alpha state, but can already be used if you can live with a risk of smaller bugs.

Warning

DO NOT INSTALL THIS ADDON. NO FURTHER UPDATES WILL BE MADE HERE.

---

Matterbridge Home Assistant

---

This Matterbridge Home Assistant package provides bindings to connect HomeAssistant with Matterbridge.

---

---

Public Announcement - Feature Freeze

As the development of this project is conducted in my spare time alongside work and family commitments, my availability to implement new features or address bugs is limited. Additionally, I must make architectural and strategic decisions for this project, which sometimes necessitate significant refactoring efforts.

In light of this, I am officially announcing a "feature freeze" as I prepare for a major update to the application. During this period, no new features will be implemented, and only critical bugs — those that render the application non-functional — will be addressed until the ongoing refactoring is complete. This process is expected to take approximately 1 to 2 months.

Key changes included in this update will be as follows:

• The application will no longer be based on matterbridge; a new user interface will be developed, replacing the existing one.
• The application will be renamed from matterbridge-home-assistant to home-assistant-matter-hub and relocated to a new GitHub repository (which is not yet publicly accessible).
• Users will need to uninstall their current instance of matterbridge-home-assistant and install the new home-assistant-matter-hub (which will be made available soon). This transition will also require re-pairing with your Matter controllers.

All updates on this will be posted in the corresponding discussion in GitHub. Make sure to subscribe to this announcement thread.

Thank you for your understanding and continued support.

---

Installation

Manual Setup / Global installation

• Install matterbridge and the plugin npm install -g matterbridge matterbridge-home-assistant
• Make sure the plugin is configured properly (see Configuration).
• Activate the plugin matterbridge -add matterbridge-home-assistant
• Start matterbridge using matterbridge -bridge

If you are getting the error message Only supported EndpointInterface implementation is Endpoint:

• This is caused by npm's module resolution of globally installed modules and project-chip's way of doing an instanceOf check.
• It happens when matterbridge and matterbridge-home-assistant are not installed in one install command as above.

Manual installation / using a package.json

• create a new working directory
• create a package.json with the following content

{
  "dependencies": {
    "matterbridge": "^1.4.0",
    "matterbridge-home-assistant": "^2.0.3"
  },
  "scripts": {
    "register": "matterbridge -add ./node_modules/matterbridge-home-assistant",
    "start": "matterbridge -bridge"
  }
}

• run npm run register and npm run start

**Important: ** this method does not allow installing or updating matterbridge plugins using the UI!

Home Assistant Add-On

Follow the Home Assistant Add-On Repository to install Matterbridge with Home Assistant.

Custom Docker Deployment

There is a ready-to-use docker image built with this project.

Running it is as easy as starting any other Docker container. Just make sure to run the container with the host network, since that is required for matter clients to connect.

The docker image is configured using environment variables (see Configuration).

# Create a volume to persist the data written by matterbridge (optional)
docker volume create matterbridge-data

# Start the container
docker run -d \
  --network host \
  --volume matterbridge-data:/root/.matterbridge \
  --volume $PWD/config.json:/app/config.json \
  --env MHA_CONFIG_FILE="/app/config.json" \
  --name matterbridge \
  ghcr.io/t0bst4r/matterbridge-home-assistant:latest

Or using docker-compose.yaml

services:
  matterbridge:
    image: ghcr.io/t0bst4r/matterbridge-home-assistant:latest
    restart: unless-stopped
    network_mode: host
    environment:
      MHA_CONFIG: |
        {
          "homeAssistant": {
            "url": "http://192.168.178.23:8123/",
            "accessToken": "ey....yQ",
            "matcher": {
              "includeDomains": ["light"]
            }
          }
        }
    volumes:
      - data:/root/.matterbridge
volumes:
  data:

Configuration

This package can be configured using a config file or an environment variable. If both are present, the environment variable will be used.

Using a file

This package can be configured using a JSON config file. Use the environment variable MHA_CONFIG_FILE to point it to the config file. See config structure.

Using an environment variable

This package can be configured using an environment variable. Use the environment variable MHA_CONFIG and put the JSON configuration in it. See config structure.

Config structure

{
  // optional:
  devices: {
    // optional: override the vendorId for all devices
    vendorId: 0,
    // optional: override the vendorName for all devices
    vendorName: 't0bst4r',
  },
  // required:
  homeAssistant: {
    // required:
    // when home assistant and matterbridge both run in docker on the same host,
    // using localhost or 127.0.0.1 will not work!
    // use the external ip address or hostname instead
    // e.g. 192.168.178.23 or my-raspi.lan
    url: 'http://192.168.178.23:8123',
    // required:
    accessToken: 'ey....yQ',
    // optional:
    matcher: {
      // optional: include all entities of these domains:
      includeDomains: ['light'],
      // optional: include all entities matching these entity_id patterns:
      includePatterns: ['media_player.samsung_tv_*'],
      // optional: include all entities having one of these labels.
      // IMPORTANT: you need to label the ENTITY, not the device.
      // It is important to use the slug of the label. When your label is "My Devices", the slug is most probably "my_devices".
      includeLabels: ['My Devices'],
      // optional: include all entities having one of the following platforms (= integration)
      // It is important to use the slug of the platform / integration.
      includePlatforms: ['hue'],
      // optional: exclude all entities of these domains:
      excludeDomains: ['lock'],
      // optional: exclude all entities matching these entity_id patterns:
      excludePatterns: ['media_player.*echo*'],
      // optional: exclude all entities having one of these labels.
      // IMPORTANT: you need to label the ENTITY, not the device.
      // It is important to use the slug of the label. When your label is "My Devices", the slug is most probably "my_devices".
      excludeLabels: ['My Devices'],
      // optional: exclude all entities having one of the following platforms (= integration)
      // It is important to use the slug of the platform / integration.
      excludePlatforms: ['hue'],
    },
  },
  // optional: override settings per domain or per entity
  overrides: {
    // optional: override settings per domain
    domains: {
      // optional: currently only covers support overrides.
      // See "Override settings for Domains or Entities" section
      cover: {},
    },
    // optional: override settings per entity
    entities: {
      // optional: currently only covers support overrides.
      // see "Override settings for Domains or Entities" section
      'cover.my_cover': {},
    },
  },
}

Entities must match any of the include matchers and must not match any of exclude matchers.

Override settings for Domains or Entities

Some domains can have optional special configurations which apply to either the whole domain, or to single entities. The settings for overrides.domains and overrides.entities share the same structure.

Cover

{
  // optional: override settings for the "Lift" feature of a cover
  lift: {
    // optional:
    // Home Assistant uses 0% as "Closed" and 100% as "Opened"
    // Matter uses 100% as "Closed" and 0% as "Opened"
    // Therefore we need to invert the percentages to properly match both specifications.
    // Saying "set the cover to 10%" to Alexa means it is 10% closed, or 90% open.
    // This is enabled by default. If your Cover should NOT behave inverted, set this setting to `false`.
    // Setting it to `false` will probably lead to strange behaviour when using the "Close/open the cover" sentence.
    // To prevent this, use the next attribute (swapOpenAndClosePercentage).
    // Both attributes (invertPercentage and swapOpenAndClosePercentage) could be combined to invert the WHOLE behaviour.
    invertPercentage: true,
    // optional:
    // Some users don't want to invert the percentages, because they want it to behave "wrong" but more naturally:
    // Saying "set the cover to 10%" should lead to 10% open, or 90% closed.
    // Therefore the previous setting (invertPercentage) should be set to "false".
    // On the other hand this leads Alexa to actually open the covers when just saying "Open the cover",
    // because it sets the percentage to 100% to close it, but 100% means "open" in HA.
    // For this case, I have added this attribute. It will just swap 0% and 100% (only those - all other values in between will not be inverted).
    // Both attributes (invertPercentage and swapOpenAndClosePercentage) could be combined to invert the WHOLE behaviour.
    swapOpenAndClosePercentage: true,
  },
}

Commissioning / Pairing the device with your Matter controller

Start matterbridge and find the commissioning QR code in the logs. This code can be used to connect your Matter controller (like Alexa, Apple Home or Google Home) to the bridge.

Supported Entities

• Automations (automation.) are mapped to Switches and currently only support on-off control
• Binary Sensor entities (binary_sensor.) provide their state (e.g. on / off)
• Cover Devices (cover.) are currently all mapped to "Window Covering"
• Fan Devices (fan.) are currently mapped to Dimmable Plugin Units, because most of the Matter controllers do not support fans.
• Input-Boolean entities (input_boolean.) including on-off control
• Light entities (light.) including on-off, brightness and hue & saturation control
• Lock Devices (lock.) including Locking and Unlocking. Some Matter controllers (like Alexa) do not allow unlocking locks by default. It needs to be enabled in the Alexa App for each Lock.
• Media Players (media_player.) are mapped to Switches and currently only support on-off control
• Scenes (scene.) are mapped to Switches and currently only support on-off control
• Scripts (script.) are mapped to Switches and currently only support on-off control
• Switch entities (switch.) including on-off control

Frequently Asked Questions

Why doesn't Matterbridge find new entities which were just added to home assistant?

matterbridge-home-assistant scans all entities once during startup and checks their visibility state. After that it only subscribes to state changes (on-off, color, etc.). Restart Matterbridge to find the new entities to be added.

How can I hide entities beside the include/exclude patterns?

matterbridge-home-assistant compares entity_ids to the include/exclude patterns and domains, but also considers the hidden state of an entity (can be found in the entity details in Home Assistant). Both are only checked once during startup, so changes will apply after restarting Matterbridge.

Why doesn't Matterbridge remove entities, which I just marked as hidden?

matterbridge-home-assistant compares entity_ids to the include/exclude patterns and domains, but also considers the hidden state of an entity (can be found in the entity details in Home Assistant). Both are only checked once during startup, so changes will apply after restarting Matterbridge.

I am getting this error message Only supported EndpointInterface implementation is Endpoint:

• This is caused by npm's module resolution of globally installed modules and project-chip's way of doing an instanceOf check.
• It happens when matterbridge and matterbridge-home-assistant are not installed in one install command as above. See the installation section above.

Contribution, Bug Reports and Enhancements

Please head over to the GitHub Repository and review the README, and its contribution section.