Update Commands.md

Clarification about INA226 driver needs.

docs/Commands.md

@@ -379,7 +379,7 @@ Sensor44<a class="cmnd" id="sensor44"></a>|See [SPS30](SPS30)
 Sensor50<a class="cmnd" id="sensor50"></a>|[PAJ7620](PAJ7620) gesture sensor<BR>`0` = sensor muted, no readings in Tasmota<BR>`1`= gesture mode<BR>`2` = proximity mode<BR>`3` = corner mode<br>`4` = PIN mode<br>`5` = cursor mode
 Sensor52<a class="cmnd" id="sensor52"></a>|iBeacon driver with [HM10](HM-10) or [HM17/HM16](HM-17)<BR>`1` and `2` = required only once to initialize the module  <BR>`u<x>` = sets update interval in seconds (scan tags every <x\> seconds) _(default = 10)_<BR>`t<x>` = set timeout interval in seconds (send RSSI=0 if tag is not detected after <x\> seconds) _(default = 30)_<BR>`d1` = enable debug mode (shows all serial traffic in console)<BR>`d0` = disable debug mode_(default = 30)_<BR>`c` = clears iBeacon list<BR>`s AT+<command>`  = send native AT commands
 Sensor53<a class="cmnd" id="sensor53"></a>|[Smart Meter Interface](Smart-Meter-Interface)<BR>`r` = reset the driver with a new descriptor specified with the Tasmota [Scripting](Scripting-Language) language.<BR>`c<x> <value>` = preset counter (x = `1..5`) to `value` when the driver is set to counter mode<BR>`d<x>` = disable data decoding and dump meter (x = `1..5`) data to the Console. This is used to decipher the meter's data format to define the variable encoding in the meter's descriptor.<BR>`d0` = disable data dump mode and revert to decoding mode.<BR>`l<x>` = monitor the serial activity at a GPIO with a connected LED. x = GPIO of the LED.<BR>`l255` = disable monitoring (default)<BR>`m<x>` = serial meter number (x = `1..5`) to be monitored<BR>`m0` = monitor all serial meters (default)
-Sensor54<a class="cmnd" id="sensor54"></a>|INA226 Current Sensor<BR>`1` = rescan for devices and return the number found.<BR>`2` = save the configuration and restart<BR>`10` = return channel 1 shunt resistance, full scale current and full scale voltage<BR>`11 <resistance>` = set INA226 channel 1 shunt <resistance> in ohms, floating point<BR>`12 <current>` = set INA226 channel 1 full scale <current> in amperes, floating point<BR>`13 <voltage>` = set INA226 channel 1 full scale <voltage> in volts, floating point (defaults to 40.96v, not persistent, must be set at boot)<BR>`20` = return channel 2 shunt resistance and full scale current<BR>`21 <resistance>` = set INA226 channel 2 shunt <resistance> in ohms, floating point<BR>`22 <current>` = set INA226 channel 2 full scale <current> in amperes, floating point<BR>`23 <voltage>` = set INA226 channel 2 full scale <voltage> in volts, floating point (defaults to 40.96v, not persistent, must be set at boot)<BR>`30` = return channel 3 shunt resistance and full scale current<BR>`31 <resistance>` = set INA226 channel 1 shunt <resistance> in ohms, floating point<BR>`32 <current>` = set INA226 channel 3 full scale <current> in amperes, floating point<BR>`33 <voltage>` = set INA226 channel 3 full scale <voltage> in volts, floating point (defaults to 40.96v, not persistent, must be set at boot)<BR>`40` = return channel 4 shunt resistance and full scale current<BR>`41 <resistance>` = set INA226 channel 1 shunt <resistance> in ohms, floating point<BR>`42 <current>` = set INA226 channel 4 full scale <current> in amperes, floating point<BR>`43 <voltage>` = set INA226 channel 4 full scale <voltage> in volts, floating point (defaults to 40.96v, not persistent, must be set at boot)
+Sensor54<a class="cmnd" id="sensor54"></a>|INA226 Current Sensor<BR>`1` = rescan for devices and return the number found, when full scale current has been per channel.<BR>`2` = save the configuration and restart<BR>`10` = return channel 1 shunt resistance, full scale current and full scale voltage<BR>`11 <resistance>` = set INA226 channel 1 shunt <resistance> in ohms, floating point<BR>`12 <current>` = set INA226 channel 1 full scale <current> in amperes, floating point<BR>`13 <voltage>` = set INA226 channel 1 full scale <voltage> in volts, floating point (defaults to 40.96v, not persistent, must be set at boot)<BR>`20` = return channel 2 shunt resistance and full scale current<BR>`21 <resistance>` = set INA226 channel 2 shunt <resistance> in ohms, floating point<BR>`22 <current>` = set INA226 channel 2 full scale <current> in amperes, floating point<BR>`23 <voltage>` = set INA226 channel 2 full scale <voltage> in volts, floating point (defaults to 40.96v, not persistent, must be set at boot)<BR>`30` = return channel 3 shunt resistance and full scale current<BR>`31 <resistance>` = set INA226 channel 1 shunt <resistance> in ohms, floating point<BR>`32 <current>` = set INA226 channel 3 full scale <current> in amperes, floating point<BR>`33 <voltage>` = set INA226 channel 3 full scale <voltage> in volts, floating point (defaults to 40.96v, not persistent, must be set at boot)<BR>`40` = return channel 4 shunt resistance and full scale current<BR>`41 <resistance>` = set INA226 channel 1 shunt <resistance> in ohms, floating point<BR>`42 <current>` = set INA226 channel 4 full scale <current> in amperes, floating point<BR>`43 <voltage>` = set INA226 channel 4 full scale <voltage> in volts, floating point (defaults to 40.96v, not persistent, must be set at boot)
 Sensor60<a class="cmnd" id="sensor60"></a>|GPS<BR>`0` = write to all available sectors, then restart and overwrite the older ones<BR>`1` = write to all available sectors, then restart and overwrite the older ones<BR>`2` = filter out horizontal drift noise<BR>`3` = turn off noise filter<BR>`4` = start recording, new data will be appended<BR>`5` = start new recording, old data will lost<BR>`6` = stop recording, download link will be visible in webUI<BR>`7` = send mqtt on new position + TELE _(consider to set TELE to a very high value)_<BR>`8` = only TELE message<BR>`9` = start NTP server<BR>`10` = deactivate NTP server<BR>`11` = force update of Tasmota-system-UTC with every new GPS-time-message<BR>`12` = do not update of Tasmota-system-UTC with every new GPS-time-message<BR>`13` = set latitude and longitude in settings<BR>`14` = open virtual serial port over TCP, usable for u-center<BR>`15` = pause virtual serial port over TCP
 Sensor68<a class="cmnd" id="sensor68"></a>|WindMeter sensor - Analog (pulse count) anemometer<BR>`1, <value>` = set radius length in millimeters (measured from center to the edge of one of the cups) `0..65535` (default = `61`mm)<BR>`2, <value>` = set number of pulses for a complete turn `1..255` (default = `1`)<BR>`3, <value>` = set pulse counter debounce time in milliseconds `1..32000` (default = `10`)<BR>`4, <value>` = set speed compensation factor, a multiplication coefficient to adjust resulting speed `-32.768..32.767` three decimal places (default = `1.180`)<BR>`5, <value>` = set minimum percentage change between current and last reported speed trigger a new tele message `0..100`, `255` = off (default = `255`)
 Sensor78<a class="cmnd" id="sensor78"></a>|EZO sensors - commands<BR>Ascii commands are sent directly to the sensor as-is.  See your specific [EZO device datasheet](https://atlas-scientific.com/#) for the list of commands available.<BR>By default, the specific command is sent to all EZO devices that are found.  If using multiple EZO sensors, and the command should be issued to a single device, the index can be specified as part of the command: Sensor78-# where `#` represent the index of the device (ex: Sensor78-1 i).  For more details please see Tasmota's support for [EZO devices](EZO.md).