Skip to content

Nuki Hub 8.22
Compare
Choose a tag to compare
@technyon technyon released this 08 Apr 07:32
· 582 commits to master since this release
8.22
c34eeb1
  • Make GPIOs user-configurable, add output of lock/opener state via GPIO (issue #148)
  • Default network device to "Wifi only"
  • Remove detetection of W5500 hardware via GPIO (configure via web interface instead)
  • In home assistant auto discovery, rename "Reset" to "Restart NUKI Hub"

If you're upgrading from a previous version, please go to "MQTT and Network Configuration" and select "Wifi only" as the network device (unless you use other network hardware). The detection for W5500 hardware via GPIO has been removed, the ESP will now try to connect to W5500 hardware. If not found, Wifi is used as a fallback, so nothing will break, but setting "Wifi only" will skip this unnecessary check (which needs to reboot the ESP and thus results in a longer boot time).

Assets 3
Loading