Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

ASoC: SOF: refine and unify sof_xxx_priv structs #31

Merged
merged 2 commits into from
Jul 16, 2018
Merged

ASoC: SOF: refine and unify sof_xxx_priv structs #31

merged 2 commits into from
Jul 16, 2018

Conversation

keyonjie
Copy link

All sof_pci_priv, sof_acpi_priv and sof_spi_priv are exactly same
structs, here unify them and put it to sof-priv.h.

Signed-off-by: Keyon Jie yang.jie@linux.intel.com

@keyonjie
ASoC: SOF: refine and unify sof_xxx_priv structs
e661ee8 
All sof_pci_priv, sof_acpi_priv and sof_spi_priv are exactly same
structs, here unify them and put it to sof-priv.h.

Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
@keyonjie
Copy link
Author

@ranj063 please help review.

@ranj063
Copy link
Collaborator

ranj063 commented Jul 13, 2018

@keyonjie , looks good to me. This is also needed for acquiring the sof device in the snd_sof_suspend/resume methods too.

@ranj063 ranj063 mentioned this pull request Jul 13, 2018
Closed
@plbossart
Copy link
Member

Humm, good point but it's probably worth waiting for @lgirdwood 's feedback. There are odd things in the code such as

priv->sof_pdata = sof_pdata;
sof_pdata->spi = spi;
sof_pdata->dev = dev;

which probably never compiled, so we should do the right thing and make an educated decision here based on the need for differentiation between different types of devices.

@lgirdwood
Copy link
Member

Probably no need to store spi since it can be referenced by cointainer_of(dev) ?

@keyonjie
Copy link
Author

@plbossart good finding, "sof_pdata->spi" won't compile, that should be another fix. As @lgirdwood mentioned, we can use container_of to retrieve all pci_dev/platform_device/spi_device from sof_pdata->dev.

@plbossart can you merge this firstly, then I will add another patch(remove pci_dev/platform_device/spi_dev) to fix the spi compiling issue on top of it.

@keyonjie
ASoC: SOF: remove superfluous parent device pointers of snd_sof_pdata
68c1721 
We had pointers for parent device of snd_sof_pdata, pci for pci_dev,
pdev for platform_device, and spi for spi_device (intended to but not
added yet). All of these can be retrieved from parent dev via
container_of(), so they are actually superfluous.

Here remove these pointers to kinds of parent devices, add an enum
sof_device_type and simplify the initialization of snd_sof_dev->parent
correspondingly.

Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
@plbossart plbossart merged commit 9b33dfa into thesofproject:topic/sof-dev Jul 16, 2018
keyonjie pushed a commit that referenced this pull request Jul 8, 2019
@Etsukata @KAGA-KOKO
cpu/hotplug: Fix out-of-bounds read when setting fail state
33d4a5a 
Setting invalid value to /sys/devices/system/cpu/cpuX/hotplug/fail
can control `struct cpuhp_step *sp` address, results in the following
global-out-of-bounds read.

Reproducer:

  # echo -2 > /sys/devices/system/cpu/cpu0/hotplug/fail

KASAN report:

  BUG: KASAN: global-out-of-bounds in write_cpuhp_fail+0x2cd/0x2e0
  Read of size 8 at addr ffffffff89734438 by task bash/1941

  CPU: 0 PID: 1941 Comm: bash Not tainted 5.2.0-rc6+ #31
  Call Trace:
   write_cpuhp_fail+0x2cd/0x2e0
   dev_attr_store+0x58/0x80
   sysfs_kf_write+0x13d/0x1a0
   kernfs_fop_write+0x2bc/0x460
   vfs_write+0x1e1/0x560
   ksys_write+0x126/0x250
   do_syscall_64+0xc1/0x390
   entry_SYSCALL_64_after_hwframe+0x49/0xbe
  RIP: 0033:0x7f05e4f4c970

  The buggy address belongs to the variable:
   cpu_hotplug_lock+0x98/0xa0

  Memory state around the buggy address:
   ffffffff89734300: fa fa fa fa 00 00 00 00 00 00 00 00 00 00 00 00
   ffffffff89734380: fa fa fa fa 00 00 00 00 00 00 00 00 00 00 00 00
  >ffffffff89734400: 00 00 00 00 fa fa fa fa 00 00 00 00 fa fa fa fa
                                          ^
   ffffffff89734480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
   ffffffff89734500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Add a sanity check for the value written from user space.

Fixes: 1db4948 ("smp/hotplug: Hotplug state fail injection")
Signed-off-by: Eiichi Tsukata <devel@etsukata.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: peterz@infradead.org
Link: https://lkml.kernel.org/r/20190627024732.31672-1-devel@etsukata.com
plbossart pushed a commit that referenced this pull request Nov 11, 2019
@ndreys @bentiss
HID: logitech-hidpp: split g920_get_config()
abdd3d0 
Original version of g920_get_config() contained two kind of actions:

    1. Device specific communication to query/set some parameters
       which requires active communication channel with the device,
       or, put in other way, for the call to be sandwiched between
       hid_device_io_start() and hid_device_io_stop().

    2. Input subsystem specific FF controller initialization which, in
       order to access a valid 'struct hid_input' via
       'hid->inputs.next', requires claimed hidinput which means be
       executed after the call to hid_hw_start() with connect_mask
       containing HID_CONNECT_HIDINPUT.

Location of g920_get_config() can only fulfill requirements for #1 and
not #2, which might result in following backtrace:

[   88.312258] logitech-hidpp-device 0003:046D:C262.0005: HID++ 4.2 device connected.
[   88.320298] BUG: kernel NULL pointer dereference, address: 0000000000000018
[   88.320304] #PF: supervisor read access in kernel mode
[   88.320307] #PF: error_code(0x0000) - not-present page
[   88.320309] PGD 0 P4D 0
[   88.320315] Oops: 0000 [#1] SMP PTI
[   88.320320] CPU: 1 PID: 3080 Comm: systemd-udevd Not tainted 5.4.0-rc1+ #31
[   88.320322] Hardware name: Apple Inc. MacBookPro11,1/Mac-189A3D4F975D5FFC, BIOS 149.0.0.0.0 09/17/2018
[   88.320334] RIP: 0010:hidpp_probe+0x61f/0x948 [hid_logitech_hidpp]
[   88.320338] Code: 81 00 00 48 89 ef e8 f0 d6 ff ff 41 89 c6 85 c0 75 b5 0f b6 44 24 28 48 8b 5d 00 88 44 24 1e 89 44 24 0c 48 8b 83 18 1c 00 00 <48> 8b 48 18 48 8b 83 10 19 00 00 48 8b 40 40 48 89 0c 24 0f b7 80
[   88.320341] RSP: 0018:ffffb0a6824aba68 EFLAGS: 00010246
[   88.320345] RAX: 0000000000000000 RBX: ffff93a50756e000 RCX: 0000000000010408
[   88.320347] RDX: 0000000000000000 RSI: ffff93a51f0ad0a0 RDI: 000000000002d0a0
[   88.320350] RBP: ffff93a50416da28 R08: ffff93a50416da70 R09: ffff93a50416da70
[   88.320352] R10: 000000148ae9e60c R11: 00000000000f1525 R12: ffff93a50756e000
[   88.320354] R13: ffff93a50756f8d0 R14: 0000000000000000 R15: ffff93a50756fc38
[   88.320358] FS:  00007f8d8c1e0940(0000) GS:ffff93a51f080000(0000) knlGS:0000000000000000
[   88.320361] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   88.320363] CR2: 0000000000000018 CR3: 00000003996d8003 CR4: 00000000001606e0
[   88.320366] Call Trace:
[   88.320377]  ? _cond_resched+0x15/0x30
[   88.320387]  ? create_pinctrl+0x2f/0x3c0
[   88.320393]  ? kernfs_link_sibling+0x94/0xe0
[   88.320398]  ? _cond_resched+0x15/0x30
[   88.320402]  ? kernfs_activate+0x5f/0x80
[   88.320406]  ? kernfs_add_one+0xe2/0x130
[   88.320411]  hid_device_probe+0x106/0x170
[   88.320419]  really_probe+0x147/0x3c0
[   88.320424]  driver_probe_device+0xb6/0x100
[   88.320428]  device_driver_attach+0x53/0x60
[   88.320433]  __driver_attach+0x8a/0x150
[   88.320437]  ? device_driver_attach+0x60/0x60
[   88.320440]  bus_for_each_dev+0x78/0xc0
[   88.320445]  bus_add_driver+0x14d/0x1f0
[   88.320450]  driver_register+0x6c/0xc0
[   88.320453]  ? 0xffffffffc0d67000
[   88.320457]  __hid_register_driver+0x4c/0x80
[   88.320464]  do_one_initcall+0x46/0x1f4
[   88.320469]  ? _cond_resched+0x15/0x30
[   88.320474]  ? kmem_cache_alloc_trace+0x162/0x220
[   88.320481]  ? do_init_module+0x23/0x230
[   88.320486]  do_init_module+0x5c/0x230
[   88.320491]  load_module+0x26e1/0x2990
[   88.320502]  ? ima_post_read_file+0xf0/0x100
[   88.320508]  ? __do_sys_finit_module+0xaa/0x110
[   88.320512]  __do_sys_finit_module+0xaa/0x110
[   88.320520]  do_syscall_64+0x5b/0x180
[   88.320525]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[   88.320528] RIP: 0033:0x7f8d8d1f01fd
[   88.320532] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 5b 8c 0c 00 f7 d8 64 89 01 48
[   88.320535] RSP: 002b:00007ffefa3bb068 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[   88.320539] RAX: ffffffffffffffda RBX: 000055922040cb40 RCX: 00007f8d8d1f01fd
[   88.320541] RDX: 0000000000000000 RSI: 00007f8d8ce4984d RDI: 0000000000000006
[   88.320543] RBP: 0000000000020000 R08: 0000000000000000 R09: 0000000000000007
[   88.320545] R10: 0000000000000006 R11: 0000000000000246 R12: 00007f8d8ce4984d
[   88.320547] R13: 0000000000000000 R14: 000055922040efc0 R15: 000055922040cb40
[   88.320551] Modules linked in: hid_logitech_hidpp(+) fuse rfcomm ccm xt_CHECKSUM xt_MASQUERADE bridge stp llc nf_nat_tftp nf_conntrack_tftp nf_conntrack_netbios_ns nf_conntrack_broadcast xt_CT ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ebtable_nat ip6table_nat ip6table_mangle ip6table_raw ip6table_security iptable_nat nf_nat tun iptable_mangle iptable_raw iptable_security nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c ip_set nfnetlink ebtable_filter ebtables ip6table_filter ip6_tables cmac bnep sunrpc dm_crypt nls_utf8 hfsplus intel_rapl_msr intel_rapl_common ath9k_htc ath9k_common x86_pkg_temp_thermal intel_powerclamp b43 ath9k_hw coretemp snd_hda_codec_hdmi cordic kvm_intel snd_hda_codec_cirrus mac80211 snd_hda_codec_generic ledtrig_audio kvm snd_hda_intel snd_intel_nhlt irqbypass snd_hda_codec btusb btrtl snd_hda_core ath btbcm ssb snd_hwdep btintel snd_seq crct10dif_pclmul iTCO_wdt snd_seq_device crc32_pclmul bluetooth mmc_core iTCO_vendor_support joydev cfg80211
[   88.320602]  applesmc ghash_clmulni_intel ecdh_generic snd_pcm input_polldev intel_cstate ecc intel_uncore thunderbolt snd_timer i2c_i801 libarc4 rfkill intel_rapl_perf lpc_ich mei_me pcspkr bcm5974 snd bcma mei soundcore acpi_als sbs kfifo_buf sbshc industrialio apple_bl i915 i2c_algo_bit drm_kms_helper drm uas crc32c_intel usb_storage video hid_apple
[   88.320630] CR2: 0000000000000018
[   88.320633] ---[ end trace 933491c8a4fadeb7 ]---
[   88.320642] RIP: 0010:hidpp_probe+0x61f/0x948 [hid_logitech_hidpp]
[   88.320645] Code: 81 00 00 48 89 ef e8 f0 d6 ff ff 41 89 c6 85 c0 75 b5 0f b6 44 24 28 48 8b 5d 00 88 44 24 1e 89 44 24 0c 48 8b 83 18 1c 00 00 <48> 8b 48 18 48 8b 83 10 19 00 00 48 8b 40 40 48 89 0c 24 0f b7 80
[   88.320647] RSP: 0018:ffffb0a6824aba68 EFLAGS: 00010246
[   88.320650] RAX: 0000000000000000 RBX: ffff93a50756e000 RCX: 0000000000010408
[   88.320652] RDX: 0000000000000000 RSI: ffff93a51f0ad0a0 RDI: 000000000002d0a0
[   88.320655] RBP: ffff93a50416da28 R08: ffff93a50416da70 R09: ffff93a50416da70
[   88.320657] R10: 000000148ae9e60c R11: 00000000000f1525 R12: ffff93a50756e000
[   88.320659] R13: ffff93a50756f8d0 R14: 0000000000000000 R15: ffff93a50756fc38
[   88.320662] FS:  00007f8d8c1e0940(0000) GS:ffff93a51f080000(0000) knlGS:0000000000000000
[   88.320664] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   88.320667] CR2: 0000000000000018 CR3: 00000003996d8003 CR4: 00000000001606e0

To solve this issue:

   1. Split g920_get_config() such that all of the device specific
      communication remains a part of the function and input subsystem
      initialization bits go to hidpp_ff_init()

   2. Move call to hidpp_ff_init() from being a part of
      g920_get_config() to be the last step of .probe(), right after a
      call to hid_hw_start() with connect_mask containing
      HID_CONNECT_HIDINPUT.

Fixes: 91cf9a9 ("HID: logitech-hidpp: make .probe usbhid capable")
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Tested-by: Sam Bazley <sambazley@fastmail.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Henrik Rydberg <rydberg@bitmath.org>
Cc: Pierre-Loup A. Griffais <pgriffais@valvesoftware.com>
Cc: Austin Palmer <austinp@valvesoftware.com>
Cc: linux-input@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # 5.2+
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
plbossart pushed a commit that referenced this pull request May 1, 2020
@jmberg-intel
iwlwifi: mvm: limit maximum queue appropriately
e5b72e3 
Due to some hardware issues, queue 31 isn't usable on devices that have
32 queues (7000, 8000, 9000 families), which is correctly reflected in
the configuration and TX queue initialization.

However, the firmware API and queue allocation code assumes that there
are 32 queues, and if something actually attempts to use #31 this leads
to a NULL-pointer dereference since it's not allocated.

Fix this by limiting to 31 in the IWL_MVM_DQA_MAX_DATA_QUEUE, and also
add some code to catch this earlier in the future, if the configuration
changes perhaps.

Cc: stable@vger.kernel.org # v4.9+
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20200417100405.98a79be2db6a.I3a4af6b03b87a6bc18db9b1ff9a812f397bee1fc@changeid
naveen-manohar pushed a commit to naveen-manohar/linux that referenced this pull request May 14, 2020
@jmberg-intel @gregkh
iwlwifi: mvm: limit maximum queue appropriately
c93fb50 
commit e5b72e3 upstream.

Due to some hardware issues, queue 31 isn't usable on devices that have
32 queues (7000, 8000, 9000 families), which is correctly reflected in
the configuration and TX queue initialization.

However, the firmware API and queue allocation code assumes that there
are 32 queues, and if something actually attempts to use thesofproject#31 this leads
to a NULL-pointer dereference since it's not allocated.

Fix this by limiting to 31 in the IWL_MVM_DQA_MAX_DATA_QUEUE, and also
add some code to catch this earlier in the future, if the configuration
changes perhaps.

Cc: stable@vger.kernel.org # v4.9+
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20200417100405.98a79be2db6a.I3a4af6b03b87a6bc18db9b1ff9a812f397bee1fc@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
naveen-manohar pushed a commit to naveen-manohar/linux that referenced this pull request Jun 4, 2020
@jmberg-intel
CHROMIUM: iwl7000: mvm: limit maximum queue appropriately
b566c41 
Due to some hardware issues, queue 32 isn't usable on devices that have
32 queues (7000, 8000, 9000 families), which is correctly reflected in
the configuration and TX queue initialization.

However, the firmware API and queue allocation code assumes that there
are 32 queues, and if something actually attempts to use thesofproject#31 this leads
to a NULL-pointer dereference since it's not allocated.

Fix this by limiting to 31 in the IWL_MVM_DQA_MAX_DATA_QUEUE, and also
add some code to catch this earlier in the future, if the configuration
changes perhaps.

Change-Id: I3a4af6b03b87a6bc18db9b1ff9a812f397bee1fc
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
iwl7000-tree: b2fb45bcf5ac4071bc76d27685cfba0c05827a77
cujomalainey pushed a commit to cujomalainey/linux that referenced this pull request Oct 26, 2020
@howardchungg @gregkh
Bluetooth: L2CAP: handle l2cap config request during open state
799263e 
[ Upstream commit 96298f6 ]

According to Core Spec Version 5.2 | Vol 3, Part A 6.1.5,
the incoming L2CAP_ConfigReq should be handled during
OPEN state.

The section below shows the btmon trace when running
L2CAP/COS/CFD/BV-12-C before and after this change.

=== Before ===
...
> ACL Data RX: Handle 256 flags 0x02 dlen 12                thesofproject#22
      L2CAP: Connection Request (0x02) ident 2 len 4
        PSM: 1 (0x0001)
        Source CID: 65
< ACL Data TX: Handle 256 flags 0x00 dlen 16                thesofproject#23
      L2CAP: Connection Response (0x03) ident 2 len 8
        Destination CID: 64
        Source CID: 65
        Result: Connection successful (0x0000)
        Status: No further information available (0x0000)
< ACL Data TX: Handle 256 flags 0x00 dlen 12                thesofproject#24
      L2CAP: Configure Request (0x04) ident 2 len 4
        Destination CID: 65
        Flags: 0x0000
> HCI Event: Number of Completed Packets (0x13) plen 5      thesofproject#25
        Num handles: 1
        Handle: 256
        Count: 1
> HCI Event: Number of Completed Packets (0x13) plen 5      thesofproject#26
        Num handles: 1
        Handle: 256
        Count: 1
> ACL Data RX: Handle 256 flags 0x02 dlen 16                thesofproject#27
      L2CAP: Configure Request (0x04) ident 3 len 8
        Destination CID: 64
        Flags: 0x0000
        Option: Unknown (0x10) [hint]
        01 00                                            ..
< ACL Data TX: Handle 256 flags 0x00 dlen 18                thesofproject#28
      L2CAP: Configure Response (0x05) ident 3 len 10
        Source CID: 65
        Flags: 0x0000
        Result: Success (0x0000)
        Option: Maximum Transmission Unit (0x01) [mandatory]
          MTU: 672
> HCI Event: Number of Completed Packets (0x13) plen 5      thesofproject#29
        Num handles: 1
        Handle: 256
        Count: 1
> ACL Data RX: Handle 256 flags 0x02 dlen 14                thesofproject#30
      L2CAP: Configure Response (0x05) ident 2 len 6
        Source CID: 64
        Flags: 0x0000
        Result: Success (0x0000)
> ACL Data RX: Handle 256 flags 0x02 dlen 20                thesofproject#31
      L2CAP: Configure Request (0x04) ident 3 len 12
        Destination CID: 64
        Flags: 0x0000
        Option: Unknown (0x10) [hint]
        01 00 91 02 11 11                                ......
< ACL Data TX: Handle 256 flags 0x00 dlen 14                thesofproject#32
      L2CAP: Command Reject (0x01) ident 3 len 6
        Reason: Invalid CID in request (0x0002)
        Destination CID: 64
        Source CID: 65
> HCI Event: Number of Completed Packets (0x13) plen 5      thesofproject#33
        Num handles: 1
        Handle: 256
        Count: 1
...
=== After ===
...
> ACL Data RX: Handle 256 flags 0x02 dlen 12               thesofproject#22
      L2CAP: Connection Request (0x02) ident 2 len 4
        PSM: 1 (0x0001)
        Source CID: 65
< ACL Data TX: Handle 256 flags 0x00 dlen 16               thesofproject#23
      L2CAP: Connection Response (0x03) ident 2 len 8
        Destination CID: 64
        Source CID: 65
        Result: Connection successful (0x0000)
        Status: No further information available (0x0000)
< ACL Data TX: Handle 256 flags 0x00 dlen 12               thesofproject#24
      L2CAP: Configure Request (0x04) ident 2 len 4
        Destination CID: 65
        Flags: 0x0000
> HCI Event: Number of Completed Packets (0x13) plen 5     thesofproject#25
        Num handles: 1
        Handle: 256
        Count: 1
> HCI Event: Number of Completed Packets (0x13) plen 5     thesofproject#26
        Num handles: 1
        Handle: 256
        Count: 1
> ACL Data RX: Handle 256 flags 0x02 dlen 16               thesofproject#27
      L2CAP: Configure Request (0x04) ident 3 len 8
        Destination CID: 64
        Flags: 0x0000
        Option: Unknown (0x10) [hint]
        01 00                                            ..
< ACL Data TX: Handle 256 flags 0x00 dlen 18               thesofproject#28
      L2CAP: Configure Response (0x05) ident 3 len 10
        Source CID: 65
        Flags: 0x0000
        Result: Success (0x0000)
        Option: Maximum Transmission Unit (0x01) [mandatory]
          MTU: 672
> HCI Event: Number of Completed Packets (0x13) plen 5     thesofproject#29
        Num handles: 1
        Handle: 256
        Count: 1
> ACL Data RX: Handle 256 flags 0x02 dlen 14               thesofproject#30
      L2CAP: Configure Response (0x05) ident 2 len 6
        Source CID: 64
        Flags: 0x0000
        Result: Success (0x0000)
> ACL Data RX: Handle 256 flags 0x02 dlen 20               thesofproject#31
      L2CAP: Configure Request (0x04) ident 3 len 12
        Destination CID: 64
        Flags: 0x0000
        Option: Unknown (0x10) [hint]
        01 00 91 02 11 11                                .....
< ACL Data TX: Handle 256 flags 0x00 dlen 18               thesofproject#32
      L2CAP: Configure Response (0x05) ident 3 len 10
        Source CID: 65
        Flags: 0x0000
        Result: Success (0x0000)
        Option: Maximum Transmission Unit (0x01) [mandatory]
          MTU: 672
< ACL Data TX: Handle 256 flags 0x00 dlen 12               thesofproject#33
      L2CAP: Configure Request (0x04) ident 3 len 4
        Destination CID: 65
        Flags: 0x0000
> HCI Event: Number of Completed Packets (0x13) plen 5     thesofproject#34
        Num handles: 1
        Handle: 256
        Count: 1
> HCI Event: Number of Completed Packets (0x13) plen 5     thesofproject#35
        Num handles: 1
        Handle: 256
        Count: 1
...

Signed-off-by: Howard Chung <howardchung@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
aiChaoSONG pushed a commit to aiChaoSONG/linux that referenced this pull request Jan 14, 2021
@olerem @kuba-moo
net: dsa: qca: ar9331: fix sleeping function called from invalid cont…
3e47495 
…ext bug

With lockdep enabled, we will get following warning:

 ar9331_switch ethernet.1:10 lan0 (uninitialized): PHY [!ahb!ethernet@1a000000!mdio!switch@10:00] driver [Qualcomm Atheros AR9331 built-in PHY] (irq=13)
 BUG: sleeping function called from invalid context at kernel/locking/mutex.c:935
 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 18, name: kworker/0:1
 INFO: lockdep is turned off.
 irq event stamp: 602
 hardirqs last  enabled at (601): [<8073fde0>] _raw_spin_unlock_irq+0x3c/0x80
 hardirqs last disabled at (602): [<8073a4f4>] __schedule+0x184/0x800
 softirqs last  enabled at (0): [<80080f60>] copy_process+0x578/0x14c8
 softirqs last disabled at (0): [<00000000>] 0x0
 CPU: 0 PID: 18 Comm: kworker/0:1 Not tainted 5.10.0-rc3-ar9331-00734-g7d644991df0c thesofproject#31
 Workqueue: events deferred_probe_work_func
 Stack : 80980000 80980000 8089ef70 80890000 804b5414 80980000 00000002 80b53728
         00000000 800d1268 804b5414 ffffffde 00000017 800afe08 81943860 0f5bfc32
         00000000 00000000 8089ef70 819436c0 ffffffea 00000000 00000000 00000000
         8194390c 808e353c 0000000f 66657272 80980000 00000000 00000000 80890000
         804b5414 80980000 00000002 80b53728 00000000 00000000 00000000 80d40000
         ...
 Call Trace:
 [<80069ce0>] show_stack+0x9c/0x140
 [<800afe08>] ___might_sleep+0x220/0x244
 [<8073bfb0>] __mutex_lock+0x70/0x374
 [<8073c2e0>] mutex_lock_nested+0x2c/0x38
 [<804b5414>] regmap_update_bits_base+0x38/0x8c
 [<804ee584>] regmap_update_bits+0x1c/0x28
 [<804ee714>] ar9331_sw_unmask_irq+0x34/0x60
 [<800d91f0>] unmask_irq+0x48/0x70
 [<800d93d4>] irq_startup+0x114/0x11c
 [<800d65b4>] __setup_irq+0x4f4/0x6d0
 [<800d68a0>] request_threaded_irq+0x110/0x190
 [<804e3ef0>] phy_request_interrupt+0x4c/0xe4
 [<804df508>] phylink_bringup_phy+0x2c0/0x37c
 [<804df7bc>] phylink_of_phy_connect+0x118/0x130
 [<806c1a64>] dsa_slave_create+0x3d0/0x578
 [<806bc4ec>] dsa_register_switch+0x934/0xa20
 [<804eef98>] ar9331_sw_probe+0x34c/0x364
 [<804eb48c>] mdio_probe+0x44/0x70
 [<8049e3b4>] really_probe+0x30c/0x4f4
 [<8049ea10>] driver_probe_device+0x264/0x26c
 [<8049bc10>] bus_for_each_drv+0xb4/0xd8
 [<8049e684>] __device_attach+0xe8/0x18c
 [<8049ce58>] bus_probe_device+0x48/0xc4
 [<8049db70>] deferred_probe_work_func+0xdc/0xf8
 [<8009ff64>] process_one_work+0x2e4/0x4a0
 [<800a0770>] worker_thread+0x2a8/0x354
 [<800a774c>] kthread+0x16c/0x174
 [<8006306c>] ret_from_kernel_thread+0x14/0x1c

 ar9331_switch ethernet.1:10 lan1 (uninitialized): PHY [!ahb!ethernet@1a000000!mdio!switch@10:02] driver [Qualcomm Atheros AR9331 built-in PHY] (irq=13)
 DSA: tree 0 setup

To fix it, it is better to move access to MDIO register to the .irq_bus_sync_unlock
call back.

Fixes: ec6698c ("net: dsa: add support for Atheros AR9331 built-in switch")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20201211110317.17061-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
aiChaoSONG pushed a commit to aiChaoSONG/linux that referenced this pull request May 6, 2021
@ojeda
Merge pull request thesofproject#31 from Rust-for-Linux/rust-ci
9ed86cb 
Fix CI
plbossart pushed a commit that referenced this pull request Jul 26, 2021
@asj @kdave
btrfs: check for missing device in btrfs_trim_fs
16a200f 
A fstrim on a degraded raid1 can trigger the following null pointer
dereference:

  BTRFS info (device loop0): allowing degraded mounts
  BTRFS info (device loop0): disk space caching is enabled
  BTRFS info (device loop0): has skinny extents
  BTRFS warning (device loop0): devid 2 uuid 97ac16f7-e14d-4db1-95bc-3d489b424adb is missing
  BTRFS warning (device loop0): devid 2 uuid 97ac16f7-e14d-4db1-95bc-3d489b424adb is missing
  BTRFS info (device loop0): enabling ssd optimizations
  BUG: kernel NULL pointer dereference, address: 0000000000000620
  PGD 0 P4D 0
  Oops: 0000 [#1] SMP NOPTI
  CPU: 0 PID: 4574 Comm: fstrim Not tainted 5.13.0-rc7+ #31
  Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
  RIP: 0010:btrfs_trim_fs+0x199/0x4a0 [btrfs]
  RSP: 0018:ffff959541797d28 EFLAGS: 00010293
  RAX: 0000000000000000 RBX: ffff946f84eca508 RCX: a7a67937adff8608
  RDX: ffff946e8122d000 RSI: 0000000000000000 RDI: ffffffffc02fdbf0
  RBP: ffff946ea4615000 R08: 0000000000000001 R09: 0000000000000000
  R10: 0000000000000000 R11: ffff946e8122d960 R12: 0000000000000000
  R13: ffff959541797db8 R14: ffff946e8122d000 R15: ffff959541797db8
  FS:  00007f55917a5080(0000) GS:ffff946f9bc00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000620 CR3: 000000002d2c8001 CR4: 00000000000706f0
  Call Trace:
  btrfs_ioctl_fitrim+0x167/0x260 [btrfs]
  btrfs_ioctl+0x1c00/0x2fe0 [btrfs]
  ? selinux_file_ioctl+0x140/0x240
  ? syscall_trace_enter.constprop.0+0x188/0x240
  ? __x64_sys_ioctl+0x83/0xb0
  __x64_sys_ioctl+0x83/0xb0

Reproducer:

  $ mkfs.btrfs -fq -d raid1 -m raid1 /dev/loop0 /dev/loop1
  $ mount /dev/loop0 /btrfs
  $ umount /btrfs
  $ btrfs dev scan --forget
  $ mount -o degraded /dev/loop0 /btrfs

  $ fstrim /btrfs

The reason is we call btrfs_trim_free_extents() for the missing device,
which uses device->bdev (NULL for missing device) to find if the device
supports discard.

Fix is to check if the device is missing before calling
btrfs_trim_free_extents().

CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
plbossart pushed a commit that referenced this pull request Aug 8, 2023
@dtatulea
net/mlx5e: xsk: Fix invalid buffer access for legacy rq
e0f5229 
The below crash can be encountered when using xdpsock in rx mode for
legacy rq: the buffer gets released in the XDP_REDIRECT path, and then
once again in the driver. This fix sets the flag to avoid releasing on
the driver side.

XSK handling of buffers for legacy rq was relying on the caller to set
the skip release flag. But the referenced fix started using fragment
counts for pages instead of the skip flag.

Crash log:
 general protection fault, probably for non-canonical address 0xffff8881217e3a: 0000 [#1] SMP
 CPU: 0 PID: 14 Comm: ksoftirqd/0 Not tainted 6.5.0-rc1+ #31
 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
 RIP: 0010:bpf_prog_03b13f331978c78c+0xf/0x28
 Code:  ...
 RSP: 0018:ffff88810082fc98 EFLAGS: 00010246
 RAX: 0000000000000000 RBX: ffff888138404901 RCX: c0ffffc900027cbc
 RDX: ffffffffa000b514 RSI: 00ffff8881217e32 RDI: ffff888138404901
 RBP: ffff88810082fc98 R08: 0000000000091100 R09: 0000000000000006
 R10: 0000000000000800 R11: 0000000000000800 R12: ffffc9000027a000
 R13: ffff8881217e2dc0 R14: ffff8881217e2910 R15: ffff8881217e2f00
 FS:  0000000000000000(0000) GS:ffff88852c800000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000564cb2e2cde0 CR3: 000000010e603004 CR4: 0000000000370eb0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  ? die_addr+0x32/0x80
  ? exc_general_protection+0x192/0x390
  ? asm_exc_general_protection+0x22/0x30
  ? 0xffffffffa000b514
  ? bpf_prog_03b13f331978c78c+0xf/0x28
  mlx5e_xdp_handle+0x48/0x670 [mlx5_core]
  ? dev_gro_receive+0x3b5/0x6e0
  mlx5e_xsk_skb_from_cqe_linear+0x6e/0x90 [mlx5_core]
  mlx5e_handle_rx_cqe+0x55/0x100 [mlx5_core]
  mlx5e_poll_rx_cq+0x87/0x6e0 [mlx5_core]
  mlx5e_napi_poll+0x45e/0x6b0 [mlx5_core]
  __napi_poll+0x25/0x1a0
  net_rx_action+0x28a/0x300
  __do_softirq+0xcd/0x279
  ? sort_range+0x20/0x20
  run_ksoftirqd+0x1a/0x20
  smpboot_thread_fn+0xa2/0x130
  kthread+0xc9/0xf0
  ? kthread_complete_and_exit+0x20/0x20
  ret_from_fork+0x1f/0x30
  </TASK>
 Modules linked in: mlx5_ib mlx5_core rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm ib_uverbs ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter overlay zram zsmalloc fuse [last unloaded: mlx5_core]
 ---[ end trace 0000000000000000 ]---

Fixes: 7abd955 ("net/mlx5e: RX, Fix page_pool page fragment tracking for XDP")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Reviewers

@plbossart plbossart plbossart approved these changes

Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

Successfully merging this pull request may close these issues.
4 participants
@keyonjie @ranj063 @plbossart @lgirdwood