OVERVIEW

Bully is a new implementation of the WPS brute force attack, written in C. It is conceptually identical to other programs, in that it exploits the (now well known) design flaw in the WPS specification. It has several advantages over the original reaver code. These include fewer dependencies, improved memory and cpu performance, correct handling of endianness, and a more robust set of options. It runs on Linux, and was specifically developed to run on embedded Linux systems (OpenWrt, etc) regardless of architecture.

Bully provides several improvements in the detection and handling of anomalous scenarios. It has been tested against access points from numerous vendors, and with differing configurations, with much success.

You must already have Wiire's Pixiewps installed. The latest version can be found here: https://github.com/wiire/pixiewps.

Requirements

apt-get -y install build-essential libpcap-dev aircrack-ng pixiewps

Setup

Download

git clone https://github.com/aanarchyy/bully

or

wget https://github.com/aanarchyy/bully/archive/master.zip && unzip master.zip

Build

cd bully*/
cd src/
make

Install

sudo make install

Usage

  usage: bully <options> interface

  Required arguments:

      interface      : Wireless interface in monitor mode (root required)

      -b, --bssid macaddr    : MAC address of the target access point
   Or
      -e, --essid string     : Extended SSID for the access point

  Optional arguments:

      -c, --channel N[,N...] : Channel number of AP, or list to hop [b/g]
      -i, --index N          : Starting pin index (7 or 8 digits)  [Auto]
      -l, --lockwait N       : Seconds to wait if the AP locks WPS   [43]
      -o, --outfile file     : Output file for messages          [stdout]
      -p, --pin N            : Starting pin number (7 or 8 digits) [Auto]
      -s, --source macaddr   : Source (hardware) MAC address      [Probe]
      -v, --verbosity N      : Verbosity level 1-4, 1 is quietest     [3]
      -w, --workdir path     : Location of pin/session files  [~/.bully/]
      -5, --5ghz             : Hop on 5GHz a/n default channel list  [No]
      -B, --bruteforce       : Bruteforce the WPS pin checksum digit [No]
      -F, --force            : Force continue in spite of warnings   [No]
      -S, --sequential       : Sequential pins (do not randomize)    [No]
      -T, --test             : Test mode (do not inject any packets) [No]

  Advanced arguments:

      -d, --pixiewps         : Attempt to use pixiewps               [No]
      -a, --acktime N        : Deprecated/ignored                  [Auto]
      -r, --retries N        : Resend packets N times when not acked  [2]
      -m, --m13time N        : Deprecated/ignored                  [Auto]
      -t, --timeout N        : Deprecated/ignored                  [Auto]
      -1, --pin1delay M,N    : Delay M seconds every Nth nack at M5 [0,1]
      -2, --pin2delay M,N    : Delay M seconds every Nth nack at M7 [5,1]
      -A, --noacks           : Disable ACK check for sent packets    [No]
      -C, --nocheck          : Skip CRC/FCS validation (performance) [No]
      -D, --detectlock       : Detect WPS lockouts unreported by AP  [No]
      -E, --eapfail          : EAP Failure terminate every exchange  [No]
      -L, --lockignore       : Ignore WPS locks reported by the AP   [No]
      -M, --m57nack          : M5/M7 timeouts treated as WSC_NACK's  [No]
      -N, --nofcs            : Packets don't contain the FCS field [Auto]
      -P, --probe            : Use probe request for nonbeaconing AP [No]
      -R, --radiotap         : Assume radiotap headers are present [Auto]
      -W, --windows7         : Masquerade as a Windows 7 registrar   [No]
      -Z, --suppress         : Suppress packet throttling algorithm  [No]
      -V, --version          : Print version info and exit
      -h, --help             : Display this help information

-d // --pixiewps

The -d option performs an offline attack, Pixie Dust (pixiewps), by automatically passing the PKE, PKR, E-Hash1, E-Hash2, E-Nonce and Authkey. pixiewps will then try to attack Ralink, Broadcom and Realtek chipsets.

-v // --verbosity

The -v option specifies the verbosity of bully. -v 4 now prints all the collected hashes and outputs the pixiewps command run. Default runlevel is 3.

Acknowledgements

None of this would have happened without the rest of the great team I am proud to credit with helping me: t6_x, DataHead, Soxrok2212, Wiire Huge thanks to wiire for helping remove the openssl dependancy!