Docker-Squid3-SSL

A Squid3 caching proxy (with SSL enabled) in a Docker container.

Details

• Ubuntu 13.10 (Saucy Salamander).
• Squid (Version 3.3.8).
• Built from source, with --enable-ssl.
• Automatically generates self-signed certificate.
• Configured to cache Docker images (default config for Squid3 doesn't handle Docker images very well.)

Building the Squid3 Proxy Docker Image

Clone the git repo and cd into the root directory.

$ git clone https://github.com/toffer/docker-squid3-ssl
$ cd docker-squid3-ssl

Building the squid3-ssl Docker image is a 3-step process. (Read the Makefile for the actual docker commands.)

$ make debs
$ make certs    # Or, copy a private key and .crt file into the certs directory.
$ make image

The first step creates a squid3-ssl-build Docker image, whose purpose is to compile Squid3 from source, produce Debian packages, and copy the .deb files to the debs directory on the host filesystem.

The second step will generate a private key (private.pem) and a self-signed certificate (proxy.docker.dev.crt) and copy them into the certs directory. The self-signed certificate has the commonName of proxy.docker.dev.

The third step uses the Debian packages from the first step to create the squid3-ssl image.

By breaking up the build process into multiple steps, it's easy to create a small squid3-ssl image. Otherwise, if we built from source and installed it on the same image, we would have a lot of packages installed (gcc, etc.) that aren't needed for running Squid, only for building it.

Running the Squid3 Proxy

To start Squid3 and set up port forwarding:

$ docker run -d -p 3128:3128 squid3-ssl

Using the Squid3 Proxy

Trust the Self-signed Certificate

To use the proxy, your computer needs to trust the self-signed certificate. To install the CA certificate on Ubuntu, follow these steps:

# "proxy.docker.dev.crt" is the name of the self-signed certificate.
$ sudo cp proxy.docker.dev.crt /usr/share/ca-certificates
$ sudo sh -c 'echo "proxy.docker.dev.crt" >> /etc/ca-certificates.conf'
$ sudo /usr/sbin/update-ca-certificates --fresh

Consult this page for instructions how to install on a different OS.

Add Entry in /etc/hosts

In addition, your computer needs to be able to resolve the name of the proxy. The easiest way to achieve this is to add an entry in /etc/hosts for the proxy.

Note: The name of the proxy must be the same as the commonName in the certificate.

# Example entry in /etc/hosts/
192.168.31.28   proxy.docker.dev

Is it Working?

Run this command twice and check the X-Cache header that Squid sets in the reponses. The second response should show a cache hit.

$ curl -s -i -x http://proxy.docker.dev:3128 https://httpbin.org/ip | grep 'X-Cache:'
X-Cache: MISS from 54ab989722f0

$ curl -s -i -x http://proxy.docker.dev:3128 https://httpbin.org/ip | grep 'X-Cache:'
X-Cache: HIT from 54ab989722f0

License

MIT license. Copyright (c) 2013 Tom Offermann.