You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
The following instructions will help you set up an encrypted mesh network on Raspberry Pi's. It takes about 15 minutes to set up a node with the Pi 3. Obviously, to have a mesh you will need more than one node.
Many board that run [Armbian](https://www.armbian.com/) such as many models of Orange Pi hardware are also supported. The same installation steps can be followed, except you would flash the SD card with Armbian instead of Raspbian. See [Hardware Table](#hardware-table) for the full list of supported hardware and check for board specific installation details in our [Frequently Asked Questions](./FAQ.md).
Many board that run [Armbian](https://www.armbian.com/) such as many models of Orange Pi hardware are also supported. The same installation steps can be followed, except you would flash the SD card with Armbian instead of Raspbian. See [Hardware Table](#hardware-table) for the full list of supported hardware and check for board specific installation details in our [Frequently Asked Questions](./docs/FAQ.md).
