Convert Pano Logic G1, G2, G2M serial numbers to a MAC address

The following was copied from panologichelp blog for easy reference

Pano Logic G1, G2 and G2M zero client serial numbers are in a format such as YYCWWUUUUU where:

YY = Last two digits of the year in which the Pano device was manufactured.

C = A Pano Logic contract manufacture code assigned that is relative to which contract manufacture produced the unit.

WW = Week of year in which the device was manufactured.

UUUUU = Unique alpha numeric characters associated with the device.

The first three bytes of all Pano Logic zero clients start with 00-1C-02. The next character represents the contract manufacture code that produced the unit (C) and is followed by the last five unique alpha numeric characters of the Pano device.

For Pano devices that have a -xPLC0 appended to the serial number, this information is ignored in the conversion. A -0PLCO would classify the device as being a G1 Pano whereas a -2PLC0 would classify the device as a G2.

Using the above format we can see the serial number to MAC address conversion below for several Pano devices.

Serial Number	MAC Address	Info On Conversion
0843809408	00-1C-02-40-94-08	G1 manufactured in 2008 by contract manufacturer code 4
0855023153	00-1C-02-52-31-53	G1 manufactured in 2008 by contract manufacturer code 5
0964136484	00-1C-02-63-64-84	G1 manufactured in 2009 by contract manufacturer code 6
1062043D9C-0PLC0	00-1C-02-64-3D-9C	G1 manufactured in 2010 by contract manufacturer code 6
1172303DF7-2PLC0	00-1C-02-70-3D-F7	G2 manufactured in 2011 by contract manufacturer code 7