μReflow Oven controller based on ESP32 with MicroPython & LVGL

Library for MAX6675/MAX31855 from Maxim Integrated for STM32

Arduino library for 14-bit MAX31855 K-thermocouple to digital converter

Logging Thermocouple Temperature and Send Data to InfluxDB system.

Read thermocouple temperature using a MAX31855 converter

Fully-packaged espresso PID module

8 channel K-type thermocouple temperature logger

Arduino multichannel input module for MAX31855 and MAX6675 with serial interface

Improve this sketch, designed to work with the MAX6675, for work properly with the MAX31855 module.

Wifi enabled thermocouple (for Raku ovens or anything else)

Maxim MAX31855 Thermocouple to Digital Converter Arduino Library with Temperature Correction Code

Monitoring systems for air handlers, steam tunnels, air conditioners and building hallways.

An alerting system that sounds an alarm when the temperature rises above (or falls below) a certain threshold.

STM32 library for MAX31855 temperature sensor using HAL and SPI

Arduino ESP8266 Device Library for the MAX31855K with the option to apply linear corrections to non-linear thermocouple response.

Solder Reflow Oven 2.0 - A homebrew solder reflow oven controller designed around an STM32L053 series MCU - PCB layouting done in Kicad

Library for MAX31855 and MAX6675 Cold-Junction Compensated Thermocouple-to-Digital Converter writen for ESP8266, ESP8285 NON-OS native SDK, but should work with Arduino and FreeRTOS.