This library enables you to use Interrupt from Hardware Timers on an nRF52-based board. These nRF52 Hardware Timers, using Interrupt, still work even if other functions are blocking. Moreover, they are much more precise than other software timers using millis() or micros(). Now supports `Sparkfun Pro nRF52840 Mini`

This library enables you to use Interrupt from Hardware Timers on an NRF52-based board using mbed-RTOS such as Nano-33-BLE. These nRF52 Hardware Timers, using Interrupt, still work even if other functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software timers using millis()…

VOICE RECOGNITION ROBOT with XIAO nRF52840 Sense

Wrapper of FS (LittleFS or not-advisable FATFS) for Arduino MBED nRF52840-based boards, such as Nano_33_BLE boards. This library facilitates your usage of FS (LittleFS or FATFS) for the onboard flash. FS supports power fail safety and high performance

CircuitPython code to detect motion of the Seeed XIAO nRF52840 Sense and send Bluetooth Low Energy (BLE) advertisements in the BTHome format when it's moving

This library enables you to use Hardware Timers on nRF52840-based Nano_33_BLE or Nano_33_BLE_Sense board to create and output PWM to pins. These PWM channels, using nRF52840 Hardware Timers, still work even if other functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software …

This library enables you to use 1 Hardware PWM module on nRF52832/nRF52840-based board, such as AdaFruit Feather nRF52832, nRF52840 Express, Itsy-Bitsy nRF52840 Express, etc. to control up to 16 or more servo motors.

This library enables you to use ISR-based PWM channels on an nRF52-based board using Adafruit_nRF52_Arduino core such as Itsy-Bitsy nRF52840 to create and output PWM any GPIO pin. It now supports 16 ISR-based PWM channels, while consuming only 1 Hardware Timer. PWM channel interval can be very long (ulong microsecs / millisecs). The most importa…

This library enables you to use ISR-based PWM channels on an nRF52-based board using Arduino-mbed mbed_nano core such as Nano-33-BLE to create and output PWM any GPIO pin. It now supports 16 ISR-based PWM channels, while consuming only 1 Hardware Timer. PWM channel interval can be very long (ulong microsecs / millisecs). The most important featu…