hwmon: (pmbus/tps53679) Add support for TI TPS53676

Add support for TI TPS53676 controller to the tps53679 pmbus driver

The driver uses the USER_DATA_03 register to figure out how many phases
are enabled and to which channel they are assigned, and sets the number
of pages and phases accordingly.

Signed-off-by: Erik Rosen <erik.rosen@metormote.com>
Link: https://lore.kernel.org/r/20210322193734.75127-3-erik.rosen@metormote.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Documentation/hwmon/tps53679.rst

@@ -19,6 +19,14 @@ Supported chips:
 
     Datasheet: https://www.ti.com/lit/gpn/TPS53667
 
+  * Texas Instruments TPS53676
+
+    Prefix: 'tps53676'
+
+    Addresses scanned: -
+
+    Datasheet: https://www.ti.com/lit/gpn/TPS53676
+
   * Texas Instruments TPS53679
 
     Prefix: 'tps53679'
@@ -136,7 +144,7 @@ power1_input		Measured input power.
 power[N]_label		"pout[1-2]".
 
 			- TPS53647, TPS53667: N=2
-			- TPS53679, TPS53681, TPS53588: N=2,3
+			- TPS53676, TPS53679, TPS53681, TPS53588: N=2,3
 
 power[N]_input		Measured output power.
 
@@ -156,10 +164,11 @@ curr[N]_label		"iout[1-2]" or "iout1.[0-5]".
 
 			The first digit is the output channel, the second
 			digit is the phase within the channel. Per-phase
-			telemetry supported on TPS53681 only.
+			telemetry supported on TPS53676 and TPS53681 only.
 
 			- TPS53647, TPS53667: N=2
 			- TPS53679, TPS53588: N=2,3
+			- TPS53676: N=2-8
 			- TPS53681: N=2-9
 
 curr[N]_input		Measured output current.

drivers/hwmon/pmbus/Kconfig

@@ -285,10 +285,10 @@ config SENSORS_TPS40422
 	  be called tps40422.
 
 config SENSORS_TPS53679
-	tristate "TI TPS53647, TPS53667, TPS53679, TPS53681, TPS53688"
+	tristate "TI TPS53647, TPS53667, TPS53676, TPS53679, TPS53681, TPS53688"
 	help
 	  If you say yes here you get hardware monitoring support for TI
-	  TPS53647, TPS53667, TPS53679, TPS53681, and TPS53688.
+	  TPS53647, TPS53667, TPS53676, TPS53679, TPS53681, and TPS53688.
 
 	  This driver can also be built as a module. If so, the module will
 	  be called tps53679.

drivers/hwmon/pmbus/tps53679.c

@@ -16,11 +16,14 @@
 #include "pmbus.h"
 
 enum chips {
-	tps53647, tps53667, tps53679, tps53681, tps53688
+	tps53647, tps53667, tps53676, tps53679, tps53681, tps53688
 };
 
 #define TPS53647_PAGE_NUM		1
 
+#define TPS53676_USER_DATA_03		0xb3
+#define TPS53676_MAX_PHASES		7
+
 #define TPS53679_PROT_VR12_5MV		0x01 /* VR12.0 mode, 5-mV DAC */
 #define TPS53679_PROT_VR12_5_10MV	0x02 /* VR12.5 mode, 10-mV DAC */
 #define TPS53679_PROT_VR13_10MV		0x04 /* VR13.0 mode, 10-mV DAC */
@@ -143,6 +146,45 @@ static int tps53681_identify(struct i2c_client *client,
 					    TPS53681_DEVICE_ID);
 }
 
+static int tps53676_identify(struct i2c_client *client,
+			     struct pmbus_driver_info *info)
+{
+	u8 buf[I2C_SMBUS_BLOCK_MAX];
+	int phases_a = 0, phases_b = 0;
+	int i, ret;
+
+	ret = i2c_smbus_read_block_data(client, PMBUS_IC_DEVICE_ID, buf);
+	if (ret < 0)
+		return ret;
+	if (strncmp("TI\x53\x67\x60", buf, 5)) {
+		dev_err(&client->dev, "Unexpected device ID: %s\n", buf);
+		return -ENODEV;
+	}
+
+	ret = i2c_smbus_read_block_data(client, TPS53676_USER_DATA_03, buf);
+	if (ret < 0)
+		return ret;
+	if (ret != 24)
+		return -EIO;
+	for (i = 0; i < 2 * TPS53676_MAX_PHASES; i += 2) {
+		if (buf[i + 1] & 0x80) {
+			if (buf[i] & 0x08)
+				phases_b++;
+			else
+				phases_a++;
+		}
+	}
+
+	info->format[PSC_VOLTAGE_OUT] = linear;
+	info->pages = 1;
+	info->phases[0] = phases_a;
+	if (phases_b > 0) {
+		info->pages = 2;
+		info->phases[1] = phases_b;
+	}
+	return 0;
+}
+
 static int tps53681_read_word_data(struct i2c_client *client, int page,
 				   int phase, int reg)
 {
@@ -183,6 +225,7 @@ static struct pmbus_driver_info tps53679_info = {
 	.pfunc[3] = PMBUS_HAVE_IOUT,
 	.pfunc[4] = PMBUS_HAVE_IOUT,
 	.pfunc[5] = PMBUS_HAVE_IOUT,
+	.pfunc[6] = PMBUS_HAVE_IOUT,
 };
 
 static int tps53679_probe(struct i2c_client *client)
@@ -206,6 +249,9 @@ static int tps53679_probe(struct i2c_client *client)
 		info->pages = TPS53647_PAGE_NUM;
 		info->identify = tps53679_identify;
 		break;
+	case tps53676:
+		info->identify = tps53676_identify;
+		break;
 	case tps53679:
 	case tps53688:
 		info->pages = TPS53679_PAGE_NUM;
@@ -225,8 +271,10 @@ static int tps53679_probe(struct i2c_client *client)
 }
 
 static const struct i2c_device_id tps53679_id[] = {
+	{"bmr474", tps53676},
 	{"tps53647", tps53647},
 	{"tps53667", tps53667},
+	{"tps53676", tps53676},
 	{"tps53679", tps53679},
 	{"tps53681", tps53681},
 	{"tps53688", tps53688},
@@ -238,6 +286,7 @@ MODULE_DEVICE_TABLE(i2c, tps53679_id);
 static const struct of_device_id __maybe_unused tps53679_of_match[] = {
 	{.compatible = "ti,tps53647", .data = (void *)tps53647},
 	{.compatible = "ti,tps53667", .data = (void *)tps53667},
+	{.compatible = "ti,tps53676", .data = (void *)tps53676},
 	{.compatible = "ti,tps53679", .data = (void *)tps53679},
 	{.compatible = "ti,tps53681", .data = (void *)tps53681},
 	{.compatible = "ti,tps53688", .data = (void *)tps53688},