update to latest #127

prajoshpremdas · 2014-09-30T20:11:15Z

No description provided.

It is not necessary to download these values to the maXTouch chip on every probe, since they are stored in NVRAM. It makes life difficult when tuning the device to keep them in sync with the config array/file, and requires a new kernel build for minor tweaks. These parameters only represent a tiny subset of the available configuration options, tracking all of these options in platform data would be a endless task. In addition, different versions of maXTouch chips may have these values in different places or may not even have them at all. Having these values also makes life more complex for device tree and other platforms where having to define a static configuration isn't helpful. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

* The mapping of the GPIO numbers into the T19 status byte varies between different maXTouch chips. Some have up to 7 GPIOs. Allowing a keycode array of up to 8 items is simpler and more generic. So replace #define with configurable number of keys which also allows the removal of is_tp. * Rename platform data parameters to include "t19" to prevent confusion with T15 key array. * Probe aborts early on when pdata is NULL, so no need to check. * Move "int i" to beginning of function (mixed declarations and code) * Use API calls rather than __set_bit() * Remove unused dev variable. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Yufeng Shen <miletus@chromium.org> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

These two object table entry fields are reported 1 less than their value. When used, however, we always want the actual size and instances. To keep the object size and instances 1-byte fields, and thus preserve the object-table struct's 6-byte packed alignment, add some convenient accessor functions that do the +1 every time these fields are accessed. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The driver should not immediately read bootloader status when in Application Update Mode. The CHG line will assert when the device has made a state transition and is ready to report a new status via i2c. This change adds a wait for completion in mxt_check_bootloader, and changes the mxt_interrupt handler to signal the completion. Signed-off-by: Benson Leung <bleung@chromium.org> Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Rather than msleep for MXT_RESET_TIME and MXT_FWRESET_TIME during the transition to bootloader mode and the transition back from app, wait for the CHG assert to indicate that the transition is done. This change replaces the msleep with a wait for completion that the mxt_interrupt handler signals. Also add CHG poll after last firmware frame - some bootloader versions will assert the interrupt line after the final frame, in testing this meant that the driver attempts to read the info block too early whilst the chip is still resetting. This improves firmware update time as we no longer wait longer than necessary for each reset. Signed-off-by: Benson Leung <bleung@chromium.org> Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

…l chips The delay before the chip can be accessed after reset varies between different chips in maXTouch family. Waiting for an interrupt and a T6 status message with the RESET bit set is a better behaviour. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

- Add error messages for probe errors - Report type in invalid object type - Tweak some other debug output messages Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The configuration is stored in NVRAM on the maXTouch chip. When the device is reset it reports a CRC of the stored configuration values. Therefore it isn't necessary to send the configuration on each probe - we can check the CRC matches and avoid a timeconsuming backup/reset cycle. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The existing implementation which encodes the configuration as a binary blob in platform data is unsatisfactory since it requires a kernel recompile for the configuration to be changed, and it doesn't deal well with firmware changes that move values around on the chip. Atmel define an ASCII format for the configuration which can be exported from their tools. This patch implements a parser for that format which loads the configuration via the firmware loader and sends it to the MXT chip. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

By validating the checksum, we can identify if the configuration is corrupt. In addition, this patch writes the configuration in a short series of block writes rather than as many individual values. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Move bootloaders reads/writes into separate functions. Instead of switching client->addr, define new field bootloader_addr in mxt_data. Implement lookup calculation for bootloader addresses. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

By implementing a frame counter, print out fewer debug messages (the firmware may contain hundreds of frames). Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Atmel supplies firmware files in ASCII HEX format (.enc) which must be converted before they can be loaded by kernel driver. Try to detect the error and print a friendly error message rather than feeding junk to the bootloader. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

By reading the touchscreen configuration from the settings that the maXTouch chip is actually using, we can remove some platform data. The matrix size is not used for anything, and results in some rather confusing code to re-read it because it may change when configuration is downloaded, so don't print it out. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

By writing zero to both the active and idle cycle times the maXTouch device is put into a deep sleep mode when it consumes minimal power. It is unnecessary to change the configuration of any other objects (for example to disable T9 touchscreen). It is counterproductive to reset the chip on resume, it will result in a long delay. However it is necessary to issue a calibrate command after the chip has spent any time in deep sleep. This patch also deals with the situation where the power configuration is zero on probe, which would mean that the device never wakes up to execute commands. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This avoids confusion with the newer T100 touchscreen object. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>

The maXTouch chips use the CHG line to generate status events in bootloader mode, and during configuration download, before there is enough information to configure the input device. Therefore set up the interrupt handler earlier. However, this introduces states where parts of the interrupt processing must not run. Use data->object_table as a way to tell whether the chip information is valid, and data->input_dev as a way to tell whether it is valid to generate input report. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org>

It is possible for the maXTouch chip to start up in bootloader mode, where it does not have a working touchscreen but the driver can still handle updating the firmware. This means that the touchscreen initialisation must be split into a separate function so it can be called after bootloading has completed. In addition, later devices have a different touchscreen object (T100) which requires handling differently. This also reduces the complexity of the probe function. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Yufeng Shen <miletus@chromium.org>

If the bootloader fails to start the appmode image on the touch controller, it stays in bootloader mode. It is possible to reflash a working firmware image from this state. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org>

Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org>

Later chips (for example mXT1664S) different mappings for bootloader addresses. This means that we must look at the family ID to determine which address to use. There is an additional complication: when we probe and we don't know the family ID yet, we need to try both possible addresses to find the bootloader. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org>

The MXT device may be in bootloader mode on probe, due to: 1) APP CRC failure, either: a) flash corruption b) bad power or other intermittent problem while checking CRC 2) If the device has been reset 10 or more times without accessing comms 3) Warm probe, device was in bootloader mode already This code attempts to recover from 1(b) and 3. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Yufeng Shen <miletus@chromium.org>

The T5 object may have various sizes depending on the objects used on the particular maXTouch chip and firmware version, therefore it can't be hardcoded in the driver. Allocate a buffer on probe instead. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org>

[ Upstream commit c0e8246 ] memset() description in ISO/IEC 9899:1999 (and elsewhere) says: The memset function copies the value of c (converted to an unsigned char) into each of the first n characters of the object pointed to by s. The kernel's arm32 memset does not cast c to unsigned char. This results in the following code to produce erroneous output: char a[128]; memset(a, -128, sizeof(a)); This is because gcc will generally emit the following code before it calls memset() : mov r0, r7 mvn r1, torvalds#127 ; 0x7f bl 00000000 <memset> r1 ends up with 0xffffff80 before being used by memset() and the 'a' array will have -128 once in every four bytes while the other bytes will be set incorrectly to -1 like this (printing the first 8 bytes) : test_module: -128 -1 -1 -1 test_module: -1 -1 -1 -128 The change here is to 'and' r1 with 255 before it is used. Fixes: 1da177e ("Linux-2.6.12-rc2") Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kursad Oney <kursad.oney@broadcom.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>

Like commit 1cf3bfc ("bpf: Support 64-bit pointers to kfuncs") for s390x, add support for 64-bit pointers to kfuncs for LoongArch. Since the infrastructure is already implemented in BPF core, the only thing need to be done is to override bpf_jit_supports_far_kfunc_call(). Before this change, several test_verifier tests failed: # ./test_verifier | grep # | grep FAIL torvalds#119/p calls: invalid kfunc call: ptr_to_mem to struct with non-scalar FAIL torvalds#120/p calls: invalid kfunc call: ptr_to_mem to struct with nesting depth > 4 FAIL torvalds#121/p calls: invalid kfunc call: ptr_to_mem to struct with FAM FAIL torvalds#122/p calls: invalid kfunc call: reg->type != PTR_TO_CTX FAIL torvalds#123/p calls: invalid kfunc call: void * not allowed in func proto without mem size arg FAIL torvalds#124/p calls: trigger reg2btf_ids[reg->type] for reg->type > __BPF_REG_TYPE_MAX FAIL torvalds#125/p calls: invalid kfunc call: reg->off must be zero when passed to release kfunc FAIL torvalds#126/p calls: invalid kfunc call: don't match first member type when passed to release kfunc FAIL torvalds#127/p calls: invalid kfunc call: PTR_TO_BTF_ID with negative offset FAIL torvalds#128/p calls: invalid kfunc call: PTR_TO_BTF_ID with variable offset FAIL torvalds#129/p calls: invalid kfunc call: referenced arg needs refcounted PTR_TO_BTF_ID FAIL torvalds#130/p calls: valid kfunc call: referenced arg needs refcounted PTR_TO_BTF_ID FAIL torvalds#486/p map_kptr: ref: reference state created and released on xchg FAIL This is because the kfuncs in the loaded module are far away from __bpf_call_base: ffff800002009440 t bpf_kfunc_call_test_fail1 [bpf_testmod] 9000000002e128d8 T __bpf_call_base The offset relative to __bpf_call_base does NOT fit in s32, which breaks the assumption in BPF core. Enable bpf_jit_supports_far_kfunc_call() lifts this limit. Note that to reproduce the above result, tools/testing/selftests/bpf/config should be applied, and run the test with JIT enabled, unpriv BPF enabled. With this change, the test_verifier tests now all passed: # ./test_verifier ... Summary: 777 PASSED, 0 SKIPPED, 0 FAILED Tested-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Add 3 test cases for skb dynptr used in tp_btf: - test_dynptr_skb_tp_btf: use skb dynptr in tp_btf and make sure it is read-only. - skb_invalid_ctx_fentry/skb_invalid_ctx_fexit: bpf_dynptr_from_skb should fail in fentry/fexit. In test_dynptr_skb_tp_btf, to trigger the tracepoint in kfree_skb, test_pkt_access is used for its test_run, as in kfree_skb.c. Because the test process is different from others, a new setup type is defined, i.e., SETUP_SKB_PROG_TP. The result is like: $ ./test_progs -t 'dynptr/test_dynptr_skb_tp_btf' torvalds#84/14 dynptr/test_dynptr_skb_tp_btf:OK torvalds#84 dynptr:OK torvalds#127 kfunc_dynptr_param:OK Summary: 2/1 PASSED, 0 SKIPPED, 0 FAILED $ ./test_progs -t 'dynptr/skb_invalid_ctx_f' torvalds#84/85 dynptr/skb_invalid_ctx_fentry:OK torvalds#84/86 dynptr/skb_invalid_ctx_fexit:OK torvalds#84 dynptr:OK torvalds#127 kfunc_dynptr_param:OK Summary: 2/2 PASSED, 0 SKIPPED, 0 FAILED Also fix two coding style nits (change spaces to tabs). Signed-off-by: Philo Lu <lulie@linux.alibaba.com>

Add 3 test cases for skb dynptr used in tp_btf: - test_dynptr_skb_tp_btf: use skb dynptr in tp_btf and make sure it is read-only. - skb_invalid_ctx_fentry/skb_invalid_ctx_fexit: bpf_dynptr_from_skb should fail in fentry/fexit. In test_dynptr_skb_tp_btf, to trigger the tracepoint in kfree_skb, test_pkt_access is used for its test_run, as in kfree_skb.c. Because the test process is different from others, a new setup type is defined, i.e., SETUP_SKB_PROG_TP. The result is like: $ ./test_progs -t 'dynptr/test_dynptr_skb_tp_btf' torvalds#84/14 dynptr/test_dynptr_skb_tp_btf:OK torvalds#84 dynptr:OK torvalds#127 kfunc_dynptr_param:OK Summary: 2/1 PASSED, 0 SKIPPED, 0 FAILED $ ./test_progs -t 'dynptr/skb_invalid_ctx_f' torvalds#84/85 dynptr/skb_invalid_ctx_fentry:OK torvalds#84/86 dynptr/skb_invalid_ctx_fexit:OK torvalds#84 dynptr:OK torvalds#127 kfunc_dynptr_param:OK Summary: 2/2 PASSED, 0 SKIPPED, 0 FAILED Also fix two coding style nits (change spaces to tabs). Signed-off-by: Philo Lu <lulie@linux.alibaba.com> Link: https://lore.kernel.org/r/20240911033719.91468-6-lulie@linux.alibaba.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>

ndyer and others added 30 commits May 23, 2014 16:03

Input: atmel_mxt_ts - return IRQ_NONE when interrupt handler fails

ffcc8c3

Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: atmel_mxt_ts - select FW_LOADER for firmware code

98db726

Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: atmel_mxt_ts - read and report bootloader version

70d9ee8

Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: atmel_mxt_ts - implement bootloader frame retries

3a2ce18

Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: atmel_mxt_ts - rename pressure to amplitude to match spec

8c5211f

Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: atmel_mxt_ts - handle multiple input reports in one message

7b56b3e

Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: atmel_mxt_ts - add Atmel copyright line

b223f50

Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>

Input: atmel_mxt_ts - handle bootloader previously unlocked

9b52bc4

Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org>

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

update to latest #127

update to latest #127

prajoshpremdas commented Sep 30, 2014

update to latest #127

update to latest #127

Conversation

prajoshpremdas commented Sep 30, 2014