Allow sample rate overrides for T/P/H sensors

README.md

@@ -57,11 +57,13 @@ bme680_bsec:
 
     # Sample rate
     # -----------
+    # This controls the sampling rate for gas-dependant sensors and will govern the interval at which the sensor heater is operated.
+    # By default this rate will also be used for temperature, pressure and humidity sensors but these can be overridden on a per-sensor level if required.
     # Available options:
     # - lp (low power - samples every 3 seconds)
     # - ulp (ultra low power - samples every 5 minutes)
     # Default: lp
-    sample_rate: lp
+    sample_rate: ulp
 
     # Interval at which to save BSEC state
     # ------------------------------------
@@ -73,16 +75,19 @@ sensor:
     temperature:
       # Temperature in °C
       name: "BME680 Temperature"
+      sample_rate: lp
       filters:
         - median
     pressure:
       # Pressure in hPa
       name: "BME680 Pressure"
+      sample_rate: lp
       filters:
         - median
     humidity:
       # Relative humidity %
       name: "BME680 Humidity"
+      sample_rate: lp
       filters:
         - median
     gas_resistance:

bme680_bsec/__init__.py

@@ -3,41 +3,49 @@
 from esphome.components import i2c
 from esphome.const import CONF_ID
 
-CODEOWNERS = ['@trvrnrth']
-DEPENDENCIES = ['i2c']
-AUTO_LOAD = ['sensor', 'text_sensor']
+CODEOWNERS = ["@trvrnrth"]
+DEPENDENCIES = ["i2c"]
+AUTO_LOAD = ["sensor", "text_sensor"]
 
-CONF_BME680_BSEC_ID = 'bme680_bsec_id'
-CONF_TEMPERATURE_OFFSET = 'temperature_offset'
-CONF_IAQ_MODE = 'iaq_mode'
-CONF_SAMPLE_RATE = 'sample_rate'
-CONF_STATE_SAVE_INTERVAL = 'state_save_interval'
+CONF_BME680_BSEC_ID = "bme680_bsec_id"
+CONF_TEMPERATURE_OFFSET = "temperature_offset"
+CONF_IAQ_MODE = "iaq_mode"
+CONF_SAMPLE_RATE = "sample_rate"
+CONF_STATE_SAVE_INTERVAL = "state_save_interval"
 
-bme680_bsec_ns = cg.esphome_ns.namespace('bme680_bsec')
+bme680_bsec_ns = cg.esphome_ns.namespace("bme680_bsec")
 
-IAQMode = bme680_bsec_ns.enum('IAQMode')
+IAQMode = bme680_bsec_ns.enum("IAQMode")
 IAQ_MODE_OPTIONS = {
-    'STATIC': IAQMode.IAQ_MODE_STATIC,
-    'MOBILE': IAQMode.IAQ_MODE_MOBILE,
+    "STATIC": IAQMode.IAQ_MODE_STATIC,
+    "MOBILE": IAQMode.IAQ_MODE_MOBILE,
 }
 
-SampleRate = bme680_bsec_ns.enum('SampleRate')
+SampleRate = bme680_bsec_ns.enum("SampleRate")
 SAMPLE_RATE_OPTIONS = {
-    'LP': SampleRate.SAMPLE_RATE_LP,
-    'ULP': SampleRate.SAMPLE_RATE_ULP,
+    "LP": SampleRate.SAMPLE_RATE_LP,
+    "ULP": SampleRate.SAMPLE_RATE_ULP,
 }
 
-BME680BSECComponent = bme680_bsec_ns.class_('BME680BSECComponent', cg.Component, i2c.I2CDevice)
+BME680BSECComponent = bme680_bsec_ns.class_(
+    "BME680BSECComponent", cg.Component, i2c.I2CDevice
+)
 
-CONFIG_SCHEMA = cv.Schema({
-    cv.GenerateID(): cv.declare_id(BME680BSECComponent),
-    cv.Optional(CONF_TEMPERATURE_OFFSET, default=0): cv.temperature,
-    cv.Optional(CONF_IAQ_MODE, default='STATIC'):
-        cv.enum(IAQ_MODE_OPTIONS, upper=True),
-    cv.Optional(CONF_SAMPLE_RATE, default='LP'):
-        cv.enum(SAMPLE_RATE_OPTIONS, upper=True),
-    cv.Optional(CONF_STATE_SAVE_INTERVAL, default='6hours'): cv.positive_time_period_minutes,
-}).extend(i2c.i2c_device_schema(0x76))
+CONFIG_SCHEMA = cv.Schema(
+    {
+        cv.GenerateID(): cv.declare_id(BME680BSECComponent),
+        cv.Optional(CONF_TEMPERATURE_OFFSET, default=0): cv.temperature,
+        cv.Optional(CONF_IAQ_MODE, default="STATIC"): cv.enum(
+            IAQ_MODE_OPTIONS, upper=True
+        ),
+        cv.Optional(CONF_SAMPLE_RATE, default="LP"): cv.enum(
+            SAMPLE_RATE_OPTIONS, upper=True
+        ),
+        cv.Optional(
+            CONF_STATE_SAVE_INTERVAL, default="6hours"
+        ): cv.positive_time_period_minutes,
+    }
+).extend(i2c.i2c_device_schema(0x76))
 
 
 def to_code(config):
@@ -48,7 +56,9 @@ def to_code(config):
     cg.add(var.set_temperature_offset(config[CONF_TEMPERATURE_OFFSET]))
     cg.add(var.set_iaq_mode(config[CONF_IAQ_MODE]))
     cg.add(var.set_sample_rate(config[CONF_SAMPLE_RATE]))
-    cg.add(var.set_state_save_interval(config[CONF_STATE_SAVE_INTERVAL].total_milliseconds))
+    cg.add(
+        var.set_state_save_interval(config[CONF_STATE_SAVE_INTERVAL].total_milliseconds)
+    )
 
-    cg.add_build_flag('-DUSING_BSEC')
-    cg.add_library('BSEC Software Library', '1.6.1480')
+    cg.add_define("USE_BSEC")
+    cg.add_library("BSEC Software Library", "1.6.1480")