Skip to content

An Org mode environment for producing Tufte-LaTeX books and handouts

License

Notifications You must be signed in to change notification settings

tsdye/tufte-org-mode

Repository files navigation

Deprecated

The Org mode LaTeX exporter can now be configured to produce Tufte LaTeX input. The patch described below is no longer necessary.

Introduction to Tufte Org Mode

Tufte Org Mode is designed to provide an Org mode environment for writing books and handouts in a style developed and made famous by Edward R. Tufte. A characteristic of Tufte's style is a page layout with a wide margin on one side (typically the right side) in which notes, references, small tables, and small figures are placed. The style is widely admired, and it was a matter of time until the LaTeX community produced the Tufte-LaTeX classes to typeset books and handouts in Tufte's style.

Tufte Org Mode consists of two files:

  • an Org mode file, tufte-latex.org, that contains documentation and setups for the Tufte-LaTeX book and Tufte-LaTeX handout classes, and
  • an Emacs Lisp file, ox-tufte-latex.el, derived from the ox-latex.el exporter written by Nicolas Goaziou, that implements an Org mode export backend for the Tufte-LaTeX classes.

The Tufte-LaTeX classes implement several non-standard LaTeX commands to achieve a Tufte style page layout, including marginfigure, margintable, and sidenote. Ox-tufte-latex.el implements these commands and tufte-latex.org gives examples of their use.

The Tufte-LaTeX package

Most standard LaTeX distributions ship an older version of the Tufte-LaTeX package. Tufte Org Mode requires version 3.5.2 of the package, which at the time of this writing was the version available from the Tufte-LaTeX web site. In particular, the Tufte-LaTeX package must support the nobib option, which instructs the package not to load natbib support. The natbib support in older versions of the Tufte-LaTeX package clashed with biblatex, which is very useful in a Tufte-style document.

You'll need to install the latest version of the Tufte-LaTeX classes where your LaTeX distribution can find them. Please consult the documentation for your LaTeX distribution for the best place to install local packages. If all else fails, put them in the folder with your Tufte Org Mode document, which is typically the first place LaTeX will look for them.

Other Required LaTeX Packages

In addition to the LaTeX packages required by the Tufte-LaTeX package, Tufte Org Mode tries to load the following packages:

  • etex
  • biblatex
  • booktabs
  • graphicx
  • microtype
  • hyphenat
  • marginfix
  • amsmath
  • morefloats
  • xparse (distributed as part of the l3packages bundle)
  • xpatch

These packages are all loaded in #+LATEX_HEADER lines.

Patches to biblatex

The Tufte-LaTeX package was written while biblatex was under development and it was not yet clear that it would be able to replace the venerable bibtex package. Accordingly, the developers of Tufte-LaTeX chose to base the package's citation handling on the popular natbib package, which is based on bibtex.

However, since that time biblatex has emerged as a more powerful and flexible alternative to bibtex, and its facilities are very useful for the humanities style citations used by Tufte.

If the Tufte-LaTeX classes are loaded with the nobib option, and biblatex is also loaded, then the footcite command defined by biblatex can be used out of the box to place citations in the document margin. For many documents, especially those with sparse marginal material, this might represent a complete solution. However, when there are many citations or an abundance of other marginal material, items in the margin might be placed incorrectly, leading most often to collisions where one item is typeset over another.

A clever piece of code that addresses this problem was posted to the StackExchange TeX-LaTeX community by moewe. It defines a sidecite command that takes an optional parameter that can be used to shift a citation up or down in the margin. This code is loaded by tufte-latex.org using #+LATEX_HEADER: lines:

#+LATEX_HEADER: \usepackage{xparse}
#+LATEX_HEADER: \usepackage{xpatch}
#+LATEX_HEADER: 
#+LATEX_HEADER: \makeatletter
#+LATEX_HEADER: \xpatchcmd{\@footnotetext}%
#+LATEX_HEADER:       {\color@begingroup}
#+LATEX_HEADER:       {\color@begingroup\toggletrue{blx@footnote}}
#+LATEX_HEADER:       {}
#+LATEX_HEADER:       {}
#+LATEX_HEADER: \makeatother
#+LATEX_HEADER: 
#+LATEX_HEADER: \DeclareCiteCommand{\sidecitehelper}
#+LATEX_HEADER:   {\usebibmacro{prenote}}
#+LATEX_HEADER:   {\usebibmacro{citeindex}%
#+LATEX_HEADER:    \usebibmacro{cite}}
#+LATEX_HEADER:   {\multicitedelim}
#+LATEX_HEADER:   {\usebibmacro{cite:postnote}}
#+LATEX_HEADER: 
#+LATEX_HEADER: \ExplSyntaxOn
#+LATEX_HEADER: \NewDocumentCommand\sidecite{D<>{}O{}om}{%
#+LATEX_HEADER:   \iftoggle{blx@footnote}
#+LATEX_HEADER:     {\cs_set_protected_nopar:Npn \__sct_wrapper:nn ##1 ##2 {\mkbibparens{##2}}}
#+LATEX_HEADER:     {\cs_set_protected_nopar:Npn \__sct_wrapper:nn ##1 ##2 {\sidenote[][##1]{##2}}}
#+LATEX_HEADER:     {\IfNoValueTF{#3}
#+LATEX_HEADER:       {\__sct_wrapper:nn{#1}{\sidecitehelper[#2]{#4}}}
#+LATEX_HEADER:       {\__sct_wrapper:nn{#1}{\sidecitehelper[#2][#3]{#4}}}}
#+LATEX_HEADER: }
#+LATEX_HEADER: \ExplSyntaxOff

The ox-tufte-latex.el Exporter

The ox-tufte-latex.el exporter is currently under review as a contribution to Org mode. If it passes muster, then it will be distributed with Org mode in the contrib folder and Emacs will be able to find it in the same way it finds other files in contrib.

In the event ox-tufte-latex.el does not pass muster, then you will have to make certain that Emacs can find it. Typically, this means that your installation location must appear in the list of directories in the load-path variable. To add your installation location to load-path you will need to execute a command something like the following example, perhaps in an initialization file:

(add-to-list 'load-path "path/to/installation/location")

Other Emacs Packages

The tufte-latex.org examples require two Emacs packages – the [[http://joostkremers.github.io/ebib/][Ebib package]] by Joost Kremers for managing a biblatex database, and the ox-extra package by Aaron Ecay to control which Org mode headlines are exported.

The Ebib package provides a facility for formatting text that can be populated with information from a biblatex database and inserted into an Org mode buffer. This facility is leveraged by Tufte Org Mode to insert Org mode links that are exported as biblatex citation commands. Six of these are definedfootcite, sidecite, cite, textcite, parencite, and multicite. In practice, the Tufte Org Mode user calls the function ebib-insert-bibtex-key, selects an entry from the bibliographic database and a citation type, and then answers three or four prompts. When the final prompt is answered, Ebib inserts the biblatex key into the Org mode buffer.

The ox-extra package implements a headline tag, :ignore:, that activates a filter to remove the headline from export. The :ignore: tag is especially handy when writing a Tufte book that lacks Parts, which are associated with first level headlines in Org Mode. In this case, the user simply tags first level headlines with :ignore:

* This headline will not be exported                                 :ignore:

These two packages are loaded with # eval: lines in the Emacs local variables list.

Other Emacs Lisp Source Code Blocks

Three other Emacs Lisp source code blocks are evaluated as Emacs local variables – user-entities, pdf-process-bibtex, and jk-keywords.

The user-entities source code block adds entities commonly used in my work to the org-entities-user list. These are unlikely to be useful for many users and they are included here as an example.

The pdf-process-bibtex source code block defines the sequence of commands that LaTeX will use to process the Tufte Org Mode document. An alternative, pdf-process-biber, is also provided, in case you would like to use the modern biber package, which intends to be a replacement for bibtex that offers support for UTF-8, remote data sources, and many other sophisticated facilities.

The jk-keywords source code block contains two functions contributed by John Kitchin that are used to retrieve keyword options in Org mode files.

Keywords

Tufte Org Mode defines several keywords that it uses primarily to construct the front matter of a book:

  • FULLNAME: the full name of the copyright holder;
  • PUBLISHER: the book publisher;
  • PRINT-DATE: the month and date of printing;
  • COPYRIGHT-DATE: the copyright year; and
  • WEB-SITE: the URL for the book.

In addition, the keyword MARGIN-NOTE-FONT can be used to select a font for margin notes, which are unnumbered notes that can appear in the margin.

Macros

Org mode macros are most useful for small bits of text because they don't work across line breaks. Macros that potentially deal with longer pieces of text have counterparts among the links, which are capable of handling text with line breaks.

Tufte Org mode defines several Org mode macros for convenience.

  • newthought: The first few words of each section are identified as a new thought and typeset in small caps.
  • sidenote: This macro takes three arguments:
    • the text of the note
    • optionally, a number for the note (if none is given, one will be assigned)
    • an offset expressed as a LaTeX length, where positive values move the note down in the margin and negative values move it up.
  • marginnote: this macro puts an unnumbered note in the margin, and takes two arguments:
    • the text of the note
    • an offset expressed as a LaTeX length, where positive values move the note down in the margin and negative values move it up.
  • tl: a convenience macro that will result in a properly typeset package name, Tufte-LaTeX.

Links

I think Org mode links are an outstanding feature. They make it very easy to extend Org mode and at least one user has proposed to make them more extensible. This document uses links for citations and for inserting arbitrary LaTeX commands.

Citation Links

Citation links are inserted by Ebib. The footcite link will place a citation in the margin at a location chosen by LaTeX. You won't be able to move it if it collides with something else. The sidecite link has an offset option that lets you move the citation up or down as you wish. The other citation links – cite, textcite, and parencite – are most useful in notes.

The biblatex package offers a footcites command with an unusual syntax. This is implemented in Tufte Org mode by placing the ƒ character (alt-f on my keyboard) in the text where the footnote number should be placed and following it with two or more multicite links. If you use the ƒ character in your work, then you'll want to change the character used in the filter.

One current limitation of Tufte Org mode is the lack of an analogous sidecites command. In practical terms, this limitation means that if you are citing multiple works, each with pre- and/or post-notes, then you'll need to use footcites and hope for the best. Alternatively, the sidecite link can handle multiple bibliography keys, you just won't be able to add pre- or post-notes to them individually.

Links for LaTeX commands

There are two general purpose links that can be used for inserting arbitrary LaTeX commands. The latex link is useful for commands without optional arguments. For example, it can be used for the newthought command, which introduces the first few words of the first paragraph in a section:

[[latex:newthought][The first few words]] of the sentence.

There is also a newthought macro that accomplishes the same thing.

The latex-opt link is useful for commands that have one optional argument. The optional argument is taken from the description part of the link. It is separated by a semi-colon from the required argument that starts the description. This is useful for things like long marginnotes that would break an Org mode macro:

[[latex-opt:marginnote][This is a long margin note that is going to babble on and on until it
extends past the point that it could be handled easily by an Org mode
macro.;1in]]

Note that the use of ; to separate the arguments means that this character shouldn't appear in the note. If your notes need semi-colons, then you'll want to edit the link definition to use some other separator character.

Note, too, that Org mode will recognize LaTeX fragments, so it is possible to enter the raw LaTeX directly, rather than relying on links. I like to use links because the buffer looks cleaner and less cluttered, which helps me concentrate on the text and flow of an argument.

Headings

The Tufte book class defines headings for Part, Chapter, Section, Subsection, and Paragraph. Part maps to first level Org mode headlines, Chapter to second level Org mode headlines, and so on.

If you don't want a book with Parts, then you can use the :ignore: tag implemented in the ox-extra library by Aaron Ecay with your first level headers:

* First level headline is a Part                                     :ignore:
** Second level headline is a Chapter
*** Third level headline is a Section
**** Fourth level headline is a Subsection
***** Fifth level headline is a Paragraph

The Tufte handout class defines headings for Section and Subsection and these are mapped to first and second level Org mode headings, respectively.

* First level headline is a Section
** Second level headline is a Subsection

Text

It is sometimes the case that you'll want a block of text to run wider than usual and extend into the margin. This is done with the fullwidth environment, which you can create with the standard Org mode solution of a #+begin_fullwidth #+end_fullwidth pair.

#+begin_fullwidth
Some long text that you want to run into the margin.
#+end_fullwidth

Tables

The Tufte LaTeX classes support three table sizes: one that fits in the text block, another that fits in the margin, and a third that spans the text block and the margin. Which kind you get is determined by the :float attribute.

This example shows a table that will be placed in the text block.

#+name: tab:text-block
#+caption[Example in-text table]: Example table in the text.
#+caption: Note that the caption is placed in the margin.
#+attr_latex: :font \footnotesize
| First | Second | Third | Fourth | Fifth | Sixth |
|-------+--------+-------+--------+-------+-------|
| One   | Two    | Three | Four   | Five  | Stop  |
| Six   | Seven  | Eight | Nine   | Ten   | Here  |

Here is an example of a table placed in the margin. Note :float margin in the #+attr_latex: line.

#+name: tab:marginal
#+caption[Example marginal table]: Example marginal table.
#+caption: Note that the table and the caption are placed in the margin.
#+attr_latex: :booktabs nil :font \footnotesize :float margin :offset -2in
| First | Second | Third |
|-------+--------+-------|
| One   | Two    | Three |
| Six   | Seven  | Eight |

Here is an example of a table that can span the text block and margin. Note :float multicolumn in the #+attr_latex: line.

#+name: tab:full-width
#+caption[Example full width table]: Example full width table.
#+caption: Note that the caption is placed in the margin.
#+attr_latex: :font \footnotesize :float multicolumn
| First | Second | Third | Fourth | Fifth | Sixth |
|-------+--------+-------+--------+-------+-------|
| One   | Two    | Three | Four   | Five  | Stop  |
| Six   | Seven  | Eight | Nine   | Ten   | Here  |

Figures

Figures also come in three widths, just like tables. However, figures have two additional attributes that adjust the alignment of the caption: vertical-alignment and horizontal-alignment. The vertical-alignment attribute can be set to t, to align the caption with the top of the figure, or b, to align it with the bottom. Sometimes, a figure will be placed on one page and its caption will appear on another. In this case, the horizontal-alignment attribute can be set to l, to make the float verso, or r, to make the float recto.

The default text-width figure is 4.375 in. wide.

#+name: fig:text-block
#+caption[Hilbert curves]: Hilbert curves of various degrees /n/.  
#+caption: Note that this figure only takes up the main text block width.
#+caption: Note also that the caption in the margin is aligned with the bottom of the image.
#+attr_latex: :vertical-alignment b
[[file:hilbertcurves.pdf]]

A figure that spans the text block and the margin is 6.75 in. wide. Note :float multicolumn in the #+attr_latex: line.

#+name: fig:full-width
#+caption[Sine wave]: This graph shows a sine wave.
#+caption: Note that the figure takes up the full page width.
#+attr_latex: :float multicolumn
[[file:sine.pdf]]

A figure placed in the margin can be 2 in. wide. A margin figure is specified by :float margin in the #+attr_latex: line. The position of the figure in the margin can be adjusted up or down using the :offset attribute, which takes a LaTeX length. A negative length will move the figure up in the margin and a positive length will move the figure down.

#+name: fig:marginal
#+caption[Helix in the margin]: Helix in the margin.
#+caption: Note that this figure fits in the margin.
#+attr_latex: :float margin :width 2in :offset -2.5in 
[[file:helix.pdf]]

About

An Org mode environment for producing Tufte-LaTeX books and handouts

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published