Error. Hit "allow" if prompted on Quest, then try again. If this persists more than 4 times, try:
- Unplug / Plug-in Quest,
- toggle USB debugging,
- reload browser,
- close other ADB programs (SideQuest),
- Check that adb.exe is not running,
- restart Quest,
- restart PC,
- try another cable,
- try amother port.
- Set Hz (Refresh rate)
- Set performance mode (CPU level, and GPU level)
- Set resolution
- Set Foveation strength
- Enable / Disable telemetry (Credit: Basti564)
- Enable / disable screen timeout
- Disable guardian
- Enable experimental settings
- Correct chromatic abberation
- Potato recording mode
- Run custom command
- Check state
Set Hz
adb shell setprop debug.oculus.refreshRate [Hz]
adb shell setprop debug.oculus.swapInterval [swap]
then
adb shell input keyevent KEYCODE_SLEEP
adb shell input keyevent KEYCODE_WAKEUP
Set performance mode
adb shell setprop debug.oculus.gpuLevel [level]
adb shell setprop debug.oculus.cpuLevel [level]
Set resolution
adb shell setprop debug.oculus.textureWidth [resolution]
adb shell setprop debug.oculus.textureHeight [resolution]
Set Foveation strength
adb shell setprop debug.oculus.foveation.level [level]
adb shell setprop debug.oculus.foveation.dynamic 0
Telemetry
adb shell pm [enable / disable] com.oculus.unifiedtelemetry
adb shell pm [enable / disable] com.oculus.gatekeeperservice
adb shell pm [enable / disable] com.oculus.notification_proxy
adb shell pm [enable / disable] com.oculus.bugreporter
adb shell pm [enable / disable] com.oculus.os.logcollector
adb shell pm [enable / disable] com.oculus.appsafety
Screen timeout
adb shell am broadcast -a com.oculus.vrpowermanager.prox_close
or
adb shell am broadcast -a com.oculus.vrpowermanager.automation_disable
Disable guardian
adb shell adb shell setprop debug.oculus.guardian_pause 1
Enable experimental settings
adb shell db shell setprop debug.oculus.experimentalEnabled 1
Chromatic abberation
adb shell adb shell setprop debug.oculus.forceChroma 1
Potato recording mode
adb shell setprop debug.oculus.capture.bitrate 1000
adb shell setprop debug.oculus.capture.height 500
adb shell setprop debug.oculus.capture.width 500
Run custom command
adb shell [command]
Uses https://github.com/webadb/webadb.js/ (MIT)