Skip to content

Latest commit

 

History

History
697 lines (472 loc) · 30.9 KB

backup-and-restore-tool.md

File metadata and controls

697 lines (472 loc) · 30.9 KB
Raw
title summary aliases
Use BR to Back up and Restore Data
Learn how to back up and restore data of the TiDB cluster using BR.
/docs/dev/br/backup-and-restore-tool/
/docs/dev/reference/tools/br/br/
/docs/dev/how-to/maintain/backup-and-restore/br/

Use BR to Back up and Restore Data

Backup & Restore (BR) is a command-line tool for distributed backup and restoration of the TiDB cluster data. Compared with dumpling and mydumper/loader, BR is more suitable for scenarios of huge data volume. This document describes the BR command line, detailed use examples, best practices, restrictions, and introduces the implementation principles of BR.

Usage restrictions

  • BR only supports TiDB v3.1 and later versions.

  • BR supports restore on clusters of different topologies. However, the online applications will be greatly impacted during the restore operation. It is recommended that you perform restore during the off-peak hours or use rate-limit to limit the rate.

  • It is recommended that you execute multiple backup operations serially. Otherwise, different backup operations might interfere with each other.

  • When BR restores data to the upstream cluster of TiCDC/Drainer, TiCDC/Drainer cannot replicate the restored data to the downstream.

  • BR supports operations only between clusters with the same new_collations_enabled_on_first_bootstrap value because BR only backs up KV data. If the cluster to be backed up and the cluster to be restored use different collations, the data validation fails. Therefore, before restoring a cluster, make sure that the switch value from the query result of the select VARIABLE_VALUE from mysql.tidb where VARIABLE_NAME='new_collation_enabled'; statement is consistent with that during the backup process.

    • For v3.1 clusters, the new collation framework is not supported, so you can see it as disabled.
    • For v4.0 clusters, check whether the new collation is enabled by executing SELECT VARIABLE_VALUE FROM mysql.tidb WHERE VARIABLE_NAME='new_collation_enabled';.

    For example, assume that data is backed up from a v3.1 cluster and will be restored to a v4.0 cluster. The new_collation_enabled value of the v4.0 cluster is true, which means that the new collation is enabled in the cluster to be restored when this cluster is created. If you perform the restore in this situation, an error might occur.

Recommended deployment configuration

  • It is recommended that you deploy BR on the PD node.
  • It is recommended that you mount a high-performance SSD to BR nodes and all TiKV nodes. A 10-gigabit network card is recommended. Otherwise, bandwidth is likely to be the performance bottleneck during the backup and restore process.

Note:

If you do not mount a network disk or use other shared storage, the data backed up by BR will be generated on each TiKV node. Because BR only backs up leader replicas, you should estimate the space reserved for each node based on the leader size.

Meanwhile, because TiDB v4.0 uses leader count for load balancing by default, leaders are greatly different in size, resulting in uneven distribution of backup data on each node.

Implementation principles

BR sends the backup or restoration commands to each TiKV node. After receiving these commands, TiKV performs the corresponding backup or restoration operations. Each TiKV node has a path in which the backup files generated in the backup operation are stored and from which the stored backup files are read during the restoration.

br-arch

Backup principle

When BR performs a backup operation, it first obtains the following information from PD:

  • The current TS (timestamp) as the time of the backup snapshot
  • The TiKV node information of the current cluster

According to these information, BR starts a TiDB instance internally to obtain the database or table information corresponding to the TS, and filters out the system databases (information_schema, performance_schema, mysql) at the same time.

According to the backup sub-command, BR adopts the following two types of backup logic:

  • Full backup: BR traverses all the tables and constructs the KV range to be backed up according to each table.
  • Single table backup: BR constructs the KV range to be backed up according a single table.

Finally, BR collects the KV range to be backed up and sends the complete backup request to the TiKV node of the cluster.

The structure of the request:

BackupRequest{
    ClusterId,      // The cluster ID.
    StartKey,       // The starting key of the backup (backed up).
    EndKey,         // The ending key of the backup (not backed up).
    StartVersion,   // The version of the last backup snapshot, used for the incremental backup.
    EndVersion,     // The backup snapshot time.
    StorageBackend, // The path where backup files are stored.
    RateLimit,      // Backup speed (MB/s).
}

After receiving the backup request, the TiKV node traverses all Region leaders on the node to find the Regions that overlap with the KV ranges in this request. The TiKV node backs up some or all of the data within the range, and generates the corresponding SST file.

After finishing backing up the data of the corresponding Region, the TiKV node returns the metadata to BR. BR collects the metadata and stores it in the backupmeta file which is used for restoration.

If StartVersion is not 0, the backup is seen as an incremental backup. In addition to KVs, BR also collects DDLs between [StartVersion, EndVersion). During data restoration, these DDLs are restored first.

If checksum is enabled when you execute the backup command, BR calculates the checksum of each backed up table for data check.

Types of backup files

Two types of backup files are generated in the path where backup files are stored:

  • The SST file: stores the data that the TiKV node backed up.
  • The backupmeta file: stores the metadata of this backup operation, including the number, the key range, the size, and the Hash (sha256) value of the backup files.

The format of the SST file name

The SST file is named in the format of storeID_regionID_regionEpoch_keyHash_cf, where

  • storeID is the TiKV node ID;
  • regionID is the Region ID;
  • regionEpoch is the version number of the Region;
  • keyHash is the Hash (sha256) value of the startKey of a range, which ensures the uniqueness of a key;
  • cf indicates the Column Family of RocksDB (default or write by default).
Restoration principle

During the data restoration process, BR performs the following tasks in order:

  1. It parses the backupmeta file in the backup path, and then starts a TiDB instance internally to create the corresponding databases and tables based on the parsed information.

  2. It aggregates the parsed SST files according to the tables.

  3. It pre-splits Regions according to the key range of the SST file so that every Region corresponds to at least one SST file.

  4. It traverses each table to be restored and the SST file corresponding to each tables.

  5. It finds the Region corresponding to the SST file and sends a request to the corresponding TiKV node for downloading the file. Then it sends a request for loading the file after the file is successfully downloaded.

After TiKV receives the request to load the SST file, TiKV uses the Raft mechanism to ensure the strong consistency of the SST data. After the downloaded SST file is loaded successfully, the file is deleted asynchronously.

After the restoration operation is completed, BR performs a checksum calculation on the restored data to compare the stored data with the backed up data.

How to use BR

Currently, you can use SQL statements or the command-line tool to back up and restore data.

Use SQL statements

TiDB v4.0.2 and later versions support backup and restore operations using SQL statements. For details, see the Backup syntax and the Restore syntax.

Use the command-line tool

Also, you can use the command-line tool to perform backup and restore. First, you need to download the binary file of the BR tool. For details, see download link.

The following section takes the command-line tool as an example to introduce how to perform backup and restore operations.

Command-line description

A br command consists of sub-commands, options, and parameters.

  • Sub-command: the characters without - or --.
  • Option: the characters that start with - or --.
  • Parameter: the characters that immediately follow behind and are passed to the sub-command or the option.

This is a complete br command:

{{< copyable "shell-regular" >}}

br backup full --pd "${PDIP}:2379" -s "local:///tmp/backup"

Explanations for the above command are as follows:

  • backup: the sub-command of br.
  • full: the sub-command of backup.
  • -s (or --storage): the option that specifies the path where the backup files are stored.
  • "local:///tmp/backup": the parameter of -s. /tmp/backup is the path in the local disk where the backed up files of each TiKV node are stored.
  • --pd: the option that specifies the Placement Driver (PD) service address.
  • "${PDIP}:2379": the parameter of --pd.

Note:

  • When the local storage is used, the backup data are scattered in the local file system of each node.

  • It is not recommended to back up to a local disk in the production environment because you have to manually aggregate these data to complete the data restoration. For more information, see Restore Cluster Data.

  • Aggregating these backup data might cause redundancy and bring troubles to operation and maintenance. Even worse, if restoring data without aggregating these data, you can receive a rather confusing error message SST file not found.

  • It is recommended to mount the NFS disk on each node, or back up to the S3 object storage.

Sub-commands

A br command consists of multiple layers of sub-commands. Currently, BR has the following three sub-commands:

  • br backup: used to back up the data of the TiDB cluster.
  • br restore: used to restore the data of the TiDB cluster.

Each of the above three sub-commands might still include the following three sub-commands to specify the scope of an operation:

  • full: used to back up or restore all the cluster data.
  • db: used to back up or restore the specified database of the cluster.
  • table: used to back up or restore a single table in the specified database of the cluster.

Common options

  • --pd: used for connection, specifying the PD server address. For example, "${PDIP}:2379".
  • -h (or --help): used to get help on all sub-commands. For example, br backup --help.
  • -V (or --version): used to check the version of BR.
  • --ca: specifies the path to the trusted CA certificate in the PEM format.
  • --cert: specifies the path to the SSL certificate in the PEM format.
  • --key: specifies the path to the SSL certificate key in the PEM format.
  • --status-addr: specifies the listening address through which BR provides statistics to Prometheus.

Back up cluster data

To back up the cluster data, use the br backup command. You can add the full or table sub-command to specify the scope of your backup operation: the whole cluster or a single table.

If the backup time might exceed the tikv_gc_life_time configuration which is 10m0s by default (10m0s means 10 minutes), increase the value of this configuration.

For example, set tikv_gc_life_time to 720h:

{{< copyable "sql" >}}

mysql -h${TiDBIP} -P4000 -u${TIDB_USER} ${password_str} -Nse \
    "update mysql.tidb set variable_value='720h' where variable_name='tikv_gc_life_time'";

Back up all the cluster data

To back up all the cluster data, execute the br backup full command. To get help on this command, execute br backup full -h or br backup full --help.

Usage example:

Back up all the cluster data to the /tmp/backup path of each TiKV node and write the backupmeta file to this path.

Note:

  • If the backup disk and the service disk are different, it has been tested that online backup reduces QPS of the read-only online service by about 15%-25% in case of full-speed backup. If you want to reduce the impact on QPS, use --ratelimit to limit the rate.

  • If the backup disk and the service disk are the same, the backup competes with the service for I/O resources. This might decrease the QPS of the read-only online service by more than half. Therefore, it is highly not recommended to back up the online service data to the TiKV data disk.

{{< copyable "shell-regular" >}}

br backup full \
    --pd "${PDIP}:2379" \
    --storage "local:///tmp/backup" \
    --ratelimit 120 \
    --log-file backupfull.log

Explanations for some options in the above command are as follows:

  • --ratelimit: specifies the maximum speed at which a backup operation is performed (MiB/s) on each TiKV node.
  • --log-file: specifies writing the BR log to the backupfull.log file.

A progress bar is displayed in the terminal during the backup. When the progress bar advances to 100%, the backup is complete. Then the BR also checks the backup data to ensure data safety. The progress bar is displayed as follows:

br backup full \
    --pd "${PDIP}:2379" \
    --storage "local:///tmp/backup" \
    --ratelimit 120 \
    --log-file backupfull.log
Full Backup <---------/................................................> 17.12%.

Back up a database

To back up a database in the cluster, execute the br backup db command. To get help on this command, execute br backup db -h or br backup db --help.

Usage example:

Back up the data of the test database to the /tmp/backup path on each TiKV node and write the backupmeta file to this path.

{{< copyable "shell-regular" >}}

br backup db \
    --pd "${PDIP}:2379" \
    --db test \
    --storage "local:///tmp/backup" \
    --ratelimit 120 \
    --log-file backuptable.log

In the above command, --db specifies the name of the database to be backed up. For descriptions of other options, see Back up all the cluster data.

A progress bar is displayed in the terminal during the backup. When the progress bar advances to 100%, the backup is complete. Then the BR also checks the backup data to ensure data safety.

Back up a table

To back up the data of a single table in the cluster, execute the br backup table command. To get help on this command, execute br backup table -h or br backup table --help.

Usage example:

Back up the data of the test.usertable table to the /tmp/backup path on each TiKV node and write the backupmeta file to this path.

{{< copyable "shell-regular" >}}

br backup table \
    --pd "${PDIP}:2379" \
    --db test \
    --table usertable \
    --storage "local:///tmp/backup" \
    --ratelimit 120 \
    --log-file backuptable.log

The table sub-command has two options:

  • --db: specifies the database name
  • --table: specifies the table name.

For descriptions of other options, see Back up all cluster data.

A progress bar is displayed in the terminal during the backup operation. When the progress bar advances to 100%, the backup is complete. Then the BR also checks the backup data to ensure data safety.

Back up with table filter

To back up multiple tables with more complex criteria, execute the br backup full command and specify the table filters with --filter or -f.

Usage example:

The following command backs up the data of all tables in the form db*.tbl* to the /tmp/backup path on each TiKV node and writes the backupmeta file to this path.

{{< copyable "shell-regular" >}}

br backup full \
    --pd "${PDIP}:2379" \
    --filter 'db*.tbl*' \
    --storage "local:///tmp/backup" \
    --ratelimit 120 \
    --log-file backupfull.log

Back up data to Amazon S3 backend

If you back up the data to the Amazon S3 backend, instead of local storage, you need to specify the S3 storage path in the storage sub-command, and allow the BR node and the TiKV node to access Amazon S3.

You can refer to the AWS Official Document to create an S3 Bucket in the specified Region. You can also refer to another AWS Official Document to create a Folder in the Bucket.

Pass SecretKey and AccessKey of the account that has privilege to access the S3 backend to the BR node. Here SecretKey and AccessKey are passed as environment variables. Then pass the privilege to the TiKV node through BR.

{{< copyable "shell-regular" >}}

export AWS_ACCESS_KEY_ID=${AccessKey}
export AWS_SECRET_ACCESS_KEY=${SecretKey}

When backing up using BR, explicitly specify the parameters --s3.region and --send-credentials-to-tikv. --s3.region indicates the region where S3 is located, and --send-credentials-to-tikv means passing the privilege to access S3 to the TiKV node.

{{< copyable "shell-regular" >}}

br backup full \
    --pd "${PDIP}:2379" \
    --storage "s3://${Bucket}/${Folder}" \
    --s3.region "${region}" \
    --send-credentials-to-tikv=true \
    --log-file backuptable.log

Back up incremental data

If you want to back up incrementally, you only need to specify the last backup timestamp --lastbackupts.

The incremental backup has two limitations:

  • The incremental backup needs to be under a different path from the previous full backup.
  • GC (Garbage Collection) safepoint must be before the lastbackupts.

To back up the incremental data between (LAST_BACKUP_TS, current PD timestamp], execute the following command:

{{< copyable "shell-regular" >}}

br backup full\
    --pd ${PDIP}:2379 \
    -s local:///home/tidb/backupdata/incr \
    --lastbackupts ${LAST_BACKUP_TS}

To get the timestamp of the last backup, execute the validate command. For example:

{{< copyable "shell-regular" >}}

LAST_BACKUP_TS=`br validate decode --field="end-version" -s local:///home/tidb/backupdata`

In the above example, for the incremental backup data, BR records the data changes and the DDL operations during (LAST_BACKUP_TS, current PD timestamp]. When restoring data, BR first restores DDL operations and then the data.

Back up Raw KV (experimental feature)

Warning:

This feature is experimental and not thoroughly tested. It is highly not recommended to use this feature in the production environment.

In some scenarios, TiKV might run independently of TiDB. Given that, BR also supports bypassing the TiDB layer and backing up data in TiKV.

For example, you can execute the following command to back up all keys between [0x31, 0x3130303030303030) in the default CF to $BACKUP_DIR:

{{< copyable "shell-regular" >}}

br backup raw --pd $PD_ADDR \
    -s "local://$BACKUP_DIR" \
    --start 31 \
    --end 3130303030303030 \
    --format hex \
    --cf default

Here, the parameters of --start and --end are decoded using the method specified by --format before being sent to TiKV. Currently, the following methods are available:

  • "raw": The input string is directly encoded as a key in binary format.
  • "hex": The default encoding method. The input string is treated as a hexadecimal number.
  • "escape": First escape the input string, and then encode it into binary format.

Restore cluster data

To restore the cluster data, use the br restore command. You can add the full, db or table sub-command to specify the scope of your restoration: the whole cluster, a database or a single table.

Note:

If you use the local storage, you must copy all back up SST files to every TiKV node in the path specified by --storage.

Even if each TiKV node eventually only need to read a part of the all SST files, they all need full access to the complete archive because:

  • Data are replicated into multiple peers. When ingesting SSTs, these files have to be present on all peers. This is unlike back up where reading from a single node is enough.
  • Where each peer is scattered to during restore is random. We don't know in advance which node will read which file.

These can be avoided using shared storage, for example mounting an NFS on the local path, or using S3. With network storage, every node can automatically read every SST file, so these caveats no longer apply.

Restore all the backup data

To restore all the backup data to the cluster, execute the br restore full command. To get help on this command, execute br restore full -h or br restore full --help.

Usage example:

Restore all the backup data in the /tmp/backup path to the cluster.

{{< copyable "shell-regular" >}}

br restore full \
    --pd "${PDIP}:2379" \
    --storage "local:///tmp/backup" \
    --ratelimit 128 \
    --log-file restorefull.log

Explanations for some options in the above command are as follows:

  • --ratelimit: specifies the maximum speed at which a restoration operation is performed (MiB/s) on each TiKV node.
  • --log-file: specifies writing the BR log to the restorefull.log file.

A progress bar is displayed in the terminal during the restoration. When the progress bar advances to 100%, the restoration is complete. Then the BR also checks the backup data to ensure data safety.

br restore full \
    --pd "${PDIP}:2379" \
    --storage "local:///tmp/backup" \
    --log-file restorefull.log
Full Restore <---------/...............................................> 17.12%.

Restore a database

To restore a database to the cluster, execute the br restore db command. To get help on this command, execute br restore db -h or br restore db --help.

Usage example:

Restore a database backed up in the /tmp/backup path to the cluster.

{{< copyable "shell-regular" >}}

br restore db \
    --pd "${PDIP}:2379" \
    --db "test" \
    --storage "local:///tmp/backup" \
    --log-file restorefull.log

In the above command, --db specifies the name of the database to be restored. For descriptions of other options, see Restore all backup data).

Restore a table

To restore a single table to the cluster, execute the br restore table command. To get help on this command, execute br restore table -h or br restore table --help.

Usage example:

Restore a table backed up in the /tmp/backup path to the cluster.

{{< copyable "shell-regular" >}}

br restore table \
    --pd "${PDIP}:2379" \
    --db "test" \
    --table "usertable" \
    --storage "local:///tmp/backup" \
    --log-file restorefull.log

In the above command, --table specifies the name of the table to be restored. For descriptions of other options, see Restore all backup data and Restore a database.

Restore with table filter

To restore multiple tables with more complex criteria, execute the br restore full command and specify the table filters with --filter or -f.

Usage example:

The following command restores a subset of tables backed up in the /tmp/backup path to the cluster.

{{< copyable "shell-regular" >}}

br restore full \
    --pd "${PDIP}:2379" \
    --filter 'db*.tbl*' \
    --storage "local:///tmp/backup" \
    --log-file restorefull.log

Restore data from Amazon S3 backend

If you restore data from the Amazon S3 backend, instead of local storage, you need to specify the S3 storage path in the storage sub-command, and allow the BR node and the TiKV node to access Amazon S3.

Pass SecretKey and AccessKey of the account that has privilege to access the S3 backend to the BR node. Here SecretKey and AccessKey are passed as environment variables. Then pass the privilege to the TiKV node through BR.

{{< copyable "shell-regular" >}}

export AWS_ACCESS_KEY_ID=${AccessKey}
export AWS_SECRET_ACCESS_KEY=${SecretKey}

When restoring data using BR, explicitly specify the parameters --s3.region and --send-credentials-to-tikv. --s3.region indicates the region where S3 is located, and --send-credentials-to-tikv means passing the privilege to access S3 to the TiKV node.

Bucket and Folder in the --storage parameter represent the S3 bucket and the folder where the data to be restored is located.

{{< copyable "shell-regular" >}}

br restore full \
    --pd "${PDIP}:2379" \
    --storage "s3://${Bucket}/${Folder}" \
    --s3.region "${region}" \
    --send-credentials-to-tikv=true \
    --log-file restorefull.log

In the above command, --table specifies the name of the table to be restored. For descriptions of other options, see Restore a database.

Restore incremental data

Restoring incremental data is similar to restoring full data using BR. Note that when restoring incremental data, make sure that all the data backed up before last backup ts has been restored to the target cluster.

Restore Raw KV (experimental feature)

Warning:

This feature is in the experiment, without being thoroughly tested. It is highly not recommended to use this feature in the production environment.

Similar to backing up Raw KV, you can execute the following command to restore Raw KV:

{{< copyable "shell-regular" >}}

br restore raw --pd $PD_ADDR \
    -s "local://$BACKUP_DIR" \
    --start 31 \
    --end 3130303030303030 \
    --format hex \
    --cf default

In the above example, all the backed up keys in the range [0x31, 0x3130303030303030) are restored to the TiKV cluster. The coding methods of these keys are identical to that of keys during the backup process

Online restore (experimental feature)

Warning:

This feature is in the experiment, without being thoroughly tested. It also relies on the unstable Placement Rules feature of PD. It is highly not recommended to use this feature in the production environment.

During data restoration, writing too much data affects the performance of the online cluster. To avoid this effect as much as possible, BR supports Placement rules to isolate resources. In this case, downloading and importing SST are only performed on a few specified nodes (or "restore nodes" for short). To complete the online restore, take the following steps.

  1. Configure PD, and start Placement rules:

    {{< copyable "shell-regular" >}}

    echo "config set enable-placement-rules true" | pd-ctl

  2. Edit the configuration file of the "restore node" in TiKV, and specify "restore" to the server configuration item:

    {{< copyable "" >}}

    [server]
labels = { exclusive = "restore" }

  3. Start TiKV of the "restore node" and restore the backed up files using BR. Compared with the offline restore, you only need to add the --online flag:

    {{< copyable "shell-regular" >}}

    br restore full \
    -s "local://$BACKUP_DIR" \
    --pd $PD_ADDR \
    --online

Best practices

  • It is recommended that you mount a shared storage (for example, NFS) on the backup path specified by -s, to make it easier to collect and manage backup files.
  • It is recommended that you use a storage hardware with high throughput, because the throughput of a storage hardware limits the backup and restoration speed.
  • It is recommended that you perform the backup operation during off-peak hours to minimize the impact on applications.

For more recommended practices of using BR, refer to BR Use Cases.

Examples

This section shows how to back up and restore the data of an existing cluster. You can estimate the performance of backup and restoration based on machine performance, configuration and data volume.

Data volume and machine configuration

Suppose that the backup and restoration operations are performed on 10 tables in the TiKV cluster, each table with 5 million rows of data. The total data volume is 35 GB.

MySQL [sbtest]> show tables;
+------------------+
| Tables_in_sbtest |
+------------------+
| sbtest1          |
| sbtest10         |
| sbtest2          |
| sbtest3          |
| sbtest4          |
| sbtest5          |
| sbtest6          |
| sbtest7          |
| sbtest8          |
| sbtest9          |
+------------------+

MySQL [sbtest]> select count(*) from sbtest1;
+----------+
| count(*) |
+----------+
|  5000000 |
+----------+
1 row in set (1.04 sec)

The table structure is as follows:

CREATE TABLE `sbtest1` (
  `id` int(11) NOT NULL AUTO_INCREMENT,
  `k` int(11) NOT NULL DEFAULT '0',
  `c` char(120) NOT NULL DEFAULT '',
  `pad` char(60) NOT NULL DEFAULT '',
  PRIMARY KEY (`id`),
  KEY `k_1` (`k`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COLLATE=utf8mb4_bin AUTO_INCREMENT=5138499

Suppose that 4 TiKV nodes is used, each with the following configuration:

CPU Memory Disk Number of replicas
16 cores 32 GB SSD 3

Backup

Before the backup operation, check the following two items:

  • You have set tikv_gc_life_time set to a larger value so that the backup operation will not be interrupted because of data loss.
  • No DDL statement is being executed on the TiDB cluster.

Then execute the following command to back up all the cluster data:

{{< copyable "shell-regular" >}}

bin/br backup full -s local:///tmp/backup --pd "${PDIP}:2379" --log-file backup.log
[INFO] [collector.go:165] ["Full backup summary: total backup ranges: 2, total success: 2, total failed: 0, total take(s): 0.00, total kv: 4, total size(Byte): 133, avg speed(Byte/s): 27293.78"] ["backup total regions"=2] ["backup checksum"=1.640969ms] ["backup fast checksum"=227.885µs]

Restoration

Before the restoration, make sure that the TiKV cluster to be restored is a new cluster.

Then execute the following command to restore all the cluster data:

{{< copyable "shell-regular" >}}

bin/br restore full -s local:///tmp/backup --pd "${PDIP}:2379" --log-file restore.log
[INFO] [collector.go:165] ["Full Restore summary: total restore tables: 1, total success: 1, total failed: 0, total take(s): 0.26, total kv: 20000, total size(MB): 10.98, avg speed(MB/s): 41.95"] ["restore files"=3] ["restore ranges"=2] ["split region"=0.562369381s] ["restore checksum"=36.072769ms]