Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

docs: correct antenna length in docs/FAQ-en.md #579

Merged
merged 1 commit into from
Mar 31, 2022
Merged

docs: correct antenna length in docs/FAQ-en.md #579

Changes from all commits
Commits
Show all changes
1 commit
Select commit
File filter

Filter by extension

Filter by extension
Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
2 changes: 1 addition & 1 deletion docs/FAQ-en.md
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -31,7 +31,7 @@ The new factor should be between current factor more or less 20% (191.8*0.8 - 19
To achieve a sufficient WLAN signal strength you can do the following things:

- Break open the faradic cage. This is possible by electrically separating the lid from the pot. Can be achieved by applying a silicone sealant between the two parts.
- Use a passive antenna. Use a shielded cable that is stripped from both ends (i. e. Lambda/4), where one side ends in the pot, exactly 3.2mm. This is transmitted passively from the inside to the outside and vice versa. A good example can be found here: http://hobbybrauer.de/forum/viewtopic.php?p=208782#p208782
- Use a passive antenna. Use a shielded cable that is stripped from both ends (i. e. Lambda/4), where one side ends in the pot, exactly 32mm. This is transmitted passively from the inside to the outside and vice versa. A good example can be found here: http://hobbybrauer.de/forum/viewtopic.php?p=208782#p208782
- Install a wifi range extender next to the barrel to increase the signal level.

- ***What should I do if my iSpindel isn't working properly after flashing it with the firmware?***
Expand Down