Pool modified for Digibyte coin. This p2pool is best installed using the p2pool-oneclick installer.

	https://github.com/farsider350/p2pool-oneclick/blob/dgb-scrypt-merged/README.md

For the experienced p2pool setup follow the guide bellow

P2pool installation with pypy -- Windows

	On Windows, pypy is only supported via the Windows Subsystem for Linux (WSL). P2pool on pypy on WSL is much faster than P2pool on
	CPython on native Windows. To install WSL, first follow the steps outlined here:

	https://msdn.microsoft.com/en-us/commandline/wsl/install_guide

	Once you've done that, run bash and follow the rest of the steps below.

P2pool installation with pypy -- Linux and Windows

Copy and paste the following commands one paragraph at a time into a bash shell in order to install p2pool on Windows or Linux.

	sudo apt-get update

	sudo apt-get install pypy pypy-dev pypy-setuptools gcc build-essential git

	wget https://bootstrap.pypa.io/ez_setup.py -O - | sudo pypy
	sudo rm setuptools-*.zip

	wget https://pypi.python.org/packages/source/z/zope.interface/zope.interface-4.1.3.tar.gz#md5=9ae3d24c0c7415deb249dd1a132f0f79
	tar zxf zope.interface-4.1.3.tar.gz
	cd zope.interface-4.1.3/
	sudo pypy setup.py install
	cd ..
	sudo rm -r zope.interface-4.1.3*

	wget https://pypi.python.org/packages/source/T/Twisted/Twisted-15.4.0.tar.bz2
	tar jxf Twisted-15.4.0.tar.bz2
	cd Twisted-15.4.0
	sudo pypy setup.py install
	cd ..
	sudo rm -r Twisted-15.4.0*

	git clone https://github.com/farsider350/p2pool-dgb-scrypt-350.git
	cd p2pool-dgb-scrypt-350
	cd digibyte_subsidy
	sudo pypy setup.py install
	cd ..
	cd litecoin_scrypt
	sudo pypy setup.py install    

digibyte.conf

	server=1
	rpcuser=user
	rpcpassword=anything long
	algo=scrypt
	listenonion=0
	listen=1
	daemon=1
	gen=0
	onlynet=IPv4
	rpcworkqueue=32
	rpcthreads=96
	rpcallowip=127.0.0.1
	rpcport=14024
	port=12026
	deprecatedrpc=accounts

Running P2Pool:

To use P2Pool, you must be running your own local digibyted. For standard configurations, using P2Pool should be as simple as:

	For Zen Server
	pypy run_p2pool.py --net digibyte

To make your node accessible from the internet, open the following ports on your router (both the worker port and peer-2-peer port please!): Worker Port = 5025; Peer-2-Peer Port = 5024

Run for additional options:

	pypy run_p2pool.py --help

Donations towards further development:

BTC: 12nQSWig35Wue2AGjiGM5F2LUvSwq8uQqS DGB: DG21rdLGRR2sMZDA1pXCrR93dKwjSz8yHo