The Helm plugin that provides s3 protocol support.
This allows you to have private Helm chart repositories hosted on Amazon S3. Refer to this article written by @andrewlock to get a detailed use case overview.
Plugin supports both Helm v2 and v3 (Helm v3 support is available since v0.9.0).
The installation itself is simple as:
$ helm plugin install https://github.com/hypnoglow/helm-s3.git
You can install a specific release version:
$ helm plugin install https://github.com/hypnoglow/helm-s3.git --version 0.10.0
To use the plugin, you do not need any special dependencies. The installer will download versioned release with prebuilt binary from github releases. However, if you want to build the plugin from source, or you want to contribute to the plugin, please see these instructions.
The plugin is also distributed as Docker images. Images are pushed to Docker Hub tagged with plugin release version and suffixed with Helm version. The image built from master branch is also available, note that it should be only used for playing and testing, it is strongly discouraged to use that image for production use cases. Refer to https://hub.docker.com/r/hypnoglow/helm-s3 for details and all available tags.
Because this plugin assumes private access to S3, you need to provide valid AWS credentials.
You can do this in the same manner as for AWS CLI tool.
So, if you want to use the plugin and you are already using AWS CLI - you are
good to go, no additional configuration required. Otherwise, follow the official guide
to set up credentials.
To minimize security issues, remember to configure your IAM user policies properly. As an example, a setup can provide only read access for users, and write access for a CI that builds and pushes charts to your repository.
Example Read Only IAM policy
{
"Version": "2012-10-17",
"Statement": [
{
"Effect": "Allow",
"Action": [
"s3:ListBucket",
"s3:GetObject"
],
"Resource": [
"arn:aws:s3:::bucket-name",
"arn:aws:s3:::bucket-name/*"
]
}
]
}Example Read and Write IAM policy
{
"Version": "2012-10-17",
"Statement": [
{
"Sid": "files",
"Effect": "Allow",
"Action": [
"s3:PutObjectAcl",
"s3:PutObject",
"s3:GetObjectAcl",
"s3:GetObject",
"s3:DeleteObject"
],
"Resource": [
"arn:aws:s3:::bucket-name/repository-name/*",
"arn:aws:s3:::bucket-name/repository-name"
]
},
{
"Sid": "bucket",
"Effect": "Allow",
"Action": "s3:ListBucket",
"Resource": "arn:aws:s3:::bucket-name"
}
]
}The plugin is able to detect if you are using Helm v2 or v3 automatically. If, for some reason, the plugin does not
detect Helm version properly, you can set HELM_S3_MODE environment variable to value 2 or 3 to force the mode.
Example:
# We have Helm version 3:
$ helm version --short
v3.0.2+g19e47ee
# For some reason, the plugin detects Helm version badly:
$ helm s3 version --mode
helm-s3 plugin version: 0.9.2
Helm version mode: v2
# Force the plugin to operate in v3 mode:
$ HELM_S3_MODE=3 helm s3 version --mode
helm-s3 plugin version: 0.9.2
Helm version mode: v3
Note: some Helm CLI commands in v3 are incompatible with v2. Example commands below are provided for v2. For commands different in v3 there is a tip 💡 below each example.
For now let's omit the process of uploading repository index and charts to s3 and assume
you already have your repository index.yaml file on s3 under path s3://bucket-name/charts/index.yaml
and a chart archive epicservice-0.5.1.tgz under path s3://bucket-name/charts/epicservice-0.5.1.tgz.
Add your repository:
$ helm repo add coolcharts s3://bucket-name/charts
Now you can use it as any other Helm chart repository. Try:
$ helm search coolcharts
NAME VERSION DESCRIPTION
coolcharts/epicservice 0.5.1 A Helm chart.
💡 For Helm v3, use helm search repo coolcharts
To install the chart:
$ helm install coolchart/epicservice --version "0.5.1"
Fetching also works:
$ helm fetch coolchart/epicservice --version "0.5.1"
Alternatively:
$ helm fetch s3://bucket-name/charts/epicservice-0.5.1.tgz
💡 For Helm v3, use helm pull coolchart/epicservice --version "0.5.1"
To create a new repository, use init:
$ helm s3 init s3://bucket-name/charts
This command generates an empty index.yaml and uploads it to the S3 bucket
under /charts key.
To work with this repo by it's name, first you need to add it using native helm command:
$ helm repo add mynewrepo s3://bucket-name/charts
Now you can push your chart to this repo:
$ helm s3 push ./epicservice-0.7.2.tgz mynewrepo
When the bucket is replicated you should make the index's URLs relative so that the charts can be accessed from a replica bucket.
$ helm s3 push --relative ./epicservice-0.7.2.tgz mynewrepo
On push, both remote and local repo indexes are automatically updated (that means
you don't need to run helm repo update).
Your pushed chart is available:
$ helm search mynewrepo
NAME VERSION DESCRIPTION
mynewrepo/epicservice 0.7.2 A Helm chart.
💡 For Helm v3, use helm search repo mynewrepo
Note that the plugin denies push when the chart with the same version already exists in the repository. This behavior is intentional. It is useful, for example, in CI automated pushing: if someone forgets to bump chart version - the chart would not be overwritten.
However, in some cases you want to replace existing chart version. To do so,
add --force flag to a push command:
$ helm s3 push --force ./epicservice-0.7.2.tgz mynewrepo
To see other available options, use --help flag:
$ helm s3 push --help
To delete specific chart version from the repository:
$ helm s3 delete epicservice --version 0.7.2 mynewrepo
As always, both remote and local repo indexes updated automatically.
The chart is deleted from the repo:
$ helm search mynewrepo/epicservice
No results found
💡 For Helm v3, use helm search repo mynewrepo/epicservice
If your repository somehow became inconsistent or broken, you can use reindex to recreate the index in accordance with the charts in the repository.
$ helm s3 reindex mynewrepo
When the bucket is replicated you should make the index's URLs relative so that the charts can be accessed from a replica bucket.
$ helm s3 reindex --relative mynewrepo
$ helm plugin remove s3
In use cases where you share a repo across multiple AWS accounts,
you may want the ability to define object ACLS to allow charts to persist there
permissions across accounts.
To do so, add the flag --acl="ACL_POLICY". The list of ACLs can be found here:
$ helm s3 push --acl="bucket-owner-full-control" ./epicservice-0.7.2.tgz mynewrepo
You can also set the default ACL be setting the S3_ACL environment variable.
The plugin assumes Amazon S3 by default. However, it can work with any S3-compatible
object storage, like minio, DreamObjects
and others. To configure the plugin to work alternative S3 backend, just define
AWS_ENDPOINT (and optionally AWS_DISABLE_SSL):
$ export AWS_ENDPOINT=localhost:9000
$ export AWS_DISABLE_SSL=true
See these integration tests that use local minio docker container for a complete example.
To enable S3 SSE export environment variable AWS_S3_SSE and set it to desired type for example AES256.
The plugin will look for the bucket in the region inferred by the environment. If the bucket is in another region, the commands will fail.
This can be controlled by exporting one of HELM_S3_REGION, AWS_REGION or AWS_DEFAULT_REGION, in order of precedence.
Additional documentation is available in the docs directory. This currently includes:
- estimated usage cost calculation
- best practices for organizing your repositories.
Contributions are welcome. Please see these instructions that will help you to develop the plugin.