[Pardus] suppport unattended install for Pardus 21.x (#462)

Signed-off-by: ZouYuhua <zouy@vmware.com>

README.md

@@ -87,6 +87,8 @@ This project supports below scenarios for end-to-end guest operating system vali
 | UnionTech OS Server 20 1050a                    | :heavy_check_mark:               |                          | :heavy_check_mark:                 |
 | Fedora Server 36 and later                      | :heavy_check_mark:               |                          | :heavy_check_mark:                 |
 | ProLinux Server 7.9, 8.5                        | :heavy_check_mark:               |                          | :heavy_check_mark:                 |
+| Pardus 21.2 Server and later                    | :heavy_check_mark:               |                          | :heavy_check_mark:                 |
+| Pardus 21.2 XFCE Desktop and later              | :heavy_check_mark:               |                          | :heavy_check_mark:                 |
 
 Note: This compatible guest operating systems list is used for this project only. For guest operating system support status on ESXi, please refer to [VMware Compatibility Guide](https://www.vmware.com/resources/compatibility/search.php?deviceCategory=software&testConfig=16).
 

autoinstall/Pardus/preseed.cfg

@@ -0,0 +1,252 @@
+#_preseed_V1
+#### Contents of the preconfiguration file (for pardus)
+
+### Localization
+# Preseeding only locale sets language, country and locale.
+d-i debconf/language string en_US:en
+d-i debian-installer/country string US
+d-i debian-installer/fallbacklocale string en_US
+d-i debian-installer/language string en_US:en
+d-i languagechooser/locale string en
+d-i debian-installer/locale string en_US
+
+# Keyboard selection.
+d-i keyboard-configuration/xkb-keymap select us
+d-i keyboard-configuration/variant select English (US)
+
+### Network configuration
+d-i netcfg/enable boolean true
+
+# netcfg will choose an interface that has link if possible. This makes it
+# skip displaying a list if there is more than one interface.
+d-i netcfg/choose_interface select auto
+d-i netcfg/use_dhcp string true
+
+# To set a different link detection timeout (default is 3 seconds).
+# Values are interpreted as seconds.
+d-i netcfg/link_wait_timeout string 10
+
+# If you have a slow dhcp server and the installer times out waiting for
+# it, this might be useful.
+d-i netcfg/dhcp_timeout string 60
+
+# If you want the preconfiguration file to work on systems both with and
+# without a dhcp server, uncomment these lines and the static network
+# configuration below.
+d-i netcfg/dhcp_failed note
+
+# Any hostname and domain names assigned from dhcp take precedence over
+# values set here. However, setting the values still prevents the questions
+# from being shown, even if values come from dhcp.
+d-i netcfg/get_hostname string pardus
+d-i netcfg/get_domain string unassigned-domain
+
+### Clock and time zone setup
+# Controls whether or not the hardware clock is set to UTC.
+d-i clock-setup/utc boolean true
+
+# You may set this to any valid setting for $TZ; see the contents of
+# /usr/share/zoneinfo/ for valid values.
+d-i time/zone string US/Eastern
+
+# Controls whether to use NTP to set the clock during the install
+d-i clock-setup/ntp boolean true
+# NTP server to use. The default is almost always fine here.
+#d-i clock-setup/ntp-server string ntp.example.com
+d-i console-setup/ask_detect boolean false
+d-i console-setup/layoutcode string us
+
+### Account setup
+# Root password encrypted using a crypt(3)  hash.
+d-i passwd/root-login boolean true
+d-i passwd/root-password-crypted password {{ vm_password_hash }}
+
+{% if new_user is defined and new_user != 'root' %}
+# To create a normal user account.
+d-i passwd/user-fullname string {{ new_user }}
+d-i passwd/username string {{ new_user }}
+# Normal user's password encrypted using a crypt(3) hash.
+d-i passwd/user-password-crypted password {{ vm_password_hash }}
+
+# The user account will be added to some standard initial groups. To
+# override that, use this.
+d-i passwd/user-default-groups string root wheel
+{% endif %}
+
+### Partitioning
+## Partitioning example
+# Specify a disk to partition.
+# For example, to use the first SCSI/SATA hard disk:
+d-i partman-auto/disk string /dev/{{ boot_disk_name }}
+# In addition, you'll need to specify the method to use.
+# The presently available methods are:
+# - regular: use the usual partition types for your architecture
+# - lvm:     use LVM to partition the disk
+# - crypto:  use LVM within an encrypted partition
+d-i partman-auto/method string lvm
+
+# You can define the amount of space that will be used for the LVM volume
+# group. It can either be a size with its unit (eg. 20 GB), a percentage of
+# free space or the 'max' keyword.
+d-i partman-auto-lvm/guided_size string max
+
+# If one of the disks that are going to be automatically partitioned
+# contains an old LVM configuration, the user will normally receive a
+# warning. This can be preseeded away...
+d-i partman-lvm/device_remove_lvm boolean true
+# The same applies to pre-existing software RAID array:
+d-i partman-md/device_remove_md boolean true
+# And the same goes for the confirmation to write the lvm partitions.
+d-i partman-lvm/confirm boolean true
+d-i partman-lvm/confirm_nooverwrite boolean true
+
+# You can choose one of the three predefined partitioning recipes:
+# - atomic: all files in one partition
+# - home:   separate /home partition
+# - multi:  separate /home, /var, and /tmp partitions
+d-i partman-auto/choose_recipe select atomic
+
+# This makes partman automatically partition without confirmation, provided
+# that you told it what to do using one of the methods above.
+d-i partman-partitioning/confirm_write_new_label boolean true
+d-i partman/choose_partition select finish
+d-i partman/confirm boolean true
+d-i partman/confirm_nooverwrite boolean true
+
+# Force UEFI booting ('BIOS compatibility' will be lost). Default: false.
+{% if firmware is defined and firmware == 'efi' %}
+d-i partman-efi/non_efi_system boolean true
+
+# Ensure the partition table is GPT - this is required for EFI
+d-i partman-partitioning/choose_label string gpt
+d-i partman-partitioning/default_label string gpt
+{% endif %}
+
+# This makes partman automatically partition without confirmation.
+d-i partman-md/confirm boolean true
+d-i partman-partitioning/confirm_write_new_label boolean true
+d-i partman/choose_partition select finish
+d-i partman/confirm boolean true
+d-i partman/confirm_nooverwrite boolean true
+
+# Default repository information (don't include codename data, d-i figures it
+# out from what's available in the ISO)
+#d-i mirror/country string manually
+#d-i mirror/http/hostname string depo.pardus.org.tr
+#d-i mirror/http/hostname seen false
+#d-i mirror/http/directory string /pardus
+#d-i mirror/http/proxy string
+# Don't add any security and updates repo to avoid an upgrade during installation
+# We might need these later, think about the following lines.
+#d-i apt-setup/services-select multiselect
+#d-i apt-setup/security_host string depo.pardus.org.tr
+#d-i apt-setup/security_path string /guvenlik
+
+### Apt setup
+d-i apt-setup/use_mirror boolean false
+d-i apt-setup/cdrom/set-first boolean false
+d-i apt-setup/cdrom/set-next boolean false
+d-i apt-setup/cdrom/set-failed boolean false
+d-i apt-setup/disable-cdrom-entries boolean true
+d-i apt-setup/enable-source-repositories boolean true
+
+# Disable upgrading while installation
+d-i pkgsel/upgrade select none
+
+### Package selection
+#tasksel tasksel/first multiselect standard, web-server, kde-desktop
+tasksel tasksel/first multiselect standard, desktop
+tasksel tasksel/desktop multiselect xfce
+
+# Individual additional packages to install
+# There is no open-vm-tools-desktop openssh-server and cloud-init in CDROM
+#d-i pkgsel/include string build-essential open-vm-tools openssh-server sg3-utils vim
+
+# Policy for applying updates. May be "none" (no automatic updates),
+# "unattended-upgrades" (install security updates automatically), or
+# "landscape" (manage system with Landscape).
+d-i pkgsel/update-policy select none
+
+# Some versions of the installer can report back on what software you have
+# installed, and what software you use. The default is not to report back,
+# but sending reports helps the project determine what software is most
+# popular and should be included on the first CD/DVD.
+popularity-contest popularity-contest/participate boolean false
+
+### Boot loader installation
+# Grub is the boot loader (for x86).
+
+# This is fairly safe to set, it makes grub install automatically to the UEFI
+# partition/boot record if no other operating system is detected on the machine.
+d-i grub-installer/only_debian boolean true
+
+# Due notably to potential USB sticks, the location of the primary drive can
+# not be determined safely in general, so this needs to be specified:
+#d-i grub-installer/bootdev string /dev/sda
+# To install to the primary device (assuming it is not a USB stick):
+d-i grub-installer/bootdev string default
+
+# Avoid that last message about the install being complete.
+d-i finish-install/reboot_in_progress note
+
+# This will prevent the installer from ejecting the CD during the reboot,
+# which is useful in some situations.
+#d-i cdrom-detect/eject boolean true
+
+### Preseeding other packages
+# Depending on what software you choose to install, or if things go wrong
+# during the installation process, it's possible that other questions may
+# be asked. You can preseed those too, of course. To get a list of every
+# possible question that could be asked during an install, do an
+# installation, and then run these commands:
+   debconf-get-selections --installer > /target/root/preceed.cfg
+   debconf-get-selections >> /target/root/preceed.cfg
+
+# This command is run just before the install finishes, but when there is
+# still a usable /target directory. You can chroot to /target and use it
+# directly, or use the apt-install and in-target commands to easily install
+# packages and run commands in the target system.
+# The packages not available in CDROM will be installed from online repo.
+d-i preseed/late_command string \
+    echo "Check network ..." > /target/dev/ttyS0; \
+    ip addr show > /target/dev/ttyS0; \
+    echo "Linkup network ..." > /target/dev/ttyS0; \
+    chroot /target /sbin/ifconfig $(/sbin/ifconfig -a | grep '^[a-z]' | cut -d: -f1 | head -n 1) up; \
+    sleep 5; \
+    echo "Check network after linkup ..." > /target/dev/ttyS0; \
+    ip addr show > /target/dev/ttyS0; \
+    echo "Check file /etc/apt/sources.list ..." > /target/dev/ttyS0; \
+    cat /target/etc/apt/sources.list > /target/dev/ttyS0; \
+    if [ -f "/target/etc/os-release" ];\
+        then\
+            echo "Add offical repo ..." > /target/dev/ttyS0;\
+            codename=$(cat /target/etc/os-release | grep PARDUS_CODENAME | cut -d= -f2);\
+            echo "deb http://depo.pardus.org.tr/pardus $codename main contrib non-free" >> /target/etc/apt/sources.list;\
+            echo "deb http://depo.pardus.org.tr/guvenlik $codename main contrib non-free" >> /target/etc/apt/sources.list;\
+            cat /target/etc/apt/sources.list > /target/dev/ttyS0;\
+    fi; \
+    echo "Update repository ..." > /target/dev/ttyS0; \
+    chroot /target apt-get update -y > /dev/ttyS0; \
+    echo "Install openssh-server ..." > /target/dev/ttyS0; \
+    chroot /target apt-get install -y --no-upgrade openssh-server > /dev/ttyS0; \
+    echo "Install packages ..." > /target/dev/ttyS0; \
+    chroot /target apt-get install -y --force-yes build-essential open-vm-tools sg3-utils vim > /dev/ttyS0; \
+    if [ -f "/target/usr/bin/Xorg" ];\
+        then\
+            echo "Install package open-vm-tools-desktop ..." > /target/dev/ttyS0;\
+            chroot /target apt-get install -y open-vm-tools-desktop > /target/dev/ttyS0;\
+    fi; \
+    {% if new_user is defined and new_user != 'root' %}
+    echo '{{ new_user }} ALL=(ALL) NOPASSWD:ALL' >/target/etc/sudoers.d/{{ new_user }}; \
+    mkdir -p -m 700 /target/home/{{ new_user }}/.ssh; \
+    echo "{{ ssh_public_key }}" > /target/home/{{ new_user }}/.ssh/authorized_keys; \
+    {% endif %}
+    mkdir -p -m 700 /target/root/.ssh; \
+    echo "{{ ssh_public_key }}" > /target/root/.ssh/authorized_keys; \
+    chown --recursive root:root /target/root/.ssh; \
+    chmod 0644 /target/root/.ssh/authorized_keys; \
+    echo "Config sshd to enable root login ..." > /target/dev/ttyS0; \
+    touch /target/etc/ssh/sshd_config.d/root.conf; \
+    echo "PasswordAuthentication yes" >> /target/etc/ssh/sshd_config.d/root.conf; \
+    echo "PermitRootLogin yes" >> /target/etc/ssh/sshd_config.d/root.conf; \
+    echo "{{ autoinstall_complete_msg }}" > /target/dev/ttyS0

autoinstall/README.md

@@ -18,6 +18,7 @@
 17. For UnionTech OS Server 20 1050e unattend auto-install, please use file UOS/Server/20/1050e/ks.cfg.
 18. For Fedora Server 36 or later unattend auto-install, please use file Fedora/36/Server/ks.cfg.
 19. For FreeBSD 13 or later unattend auto-install, please use file FreeBSD/installerconfig.
+20. For Pardus 21.2 Server and XFCE Desktop or later unattend auto-install, please use file Pardus/preseed.cfg.
 
 # Notes
 ## For Windows

common/test_rescue.yml

@@ -66,7 +66,6 @@
         - vm_dir_name
         - vm_serial_port_output_file is defined
         - vm_serial_port_output_file
-        - guest_id is match('freebsd')
 
     - name: "Take a snapshot at VM current state"
       include_tasks: vm_take_snapshot.yml

linux/deploy_vm/create_unattend_install_iso.yml

@@ -65,6 +65,7 @@
         - unattend_install_conf is not match('Debian')
         - unattend_install_conf is not match('Ubuntu/Desktop/Ubiquity')
         - unattend_install_conf is not match('FreeBSD')
+        - unattend_install_conf is not match('Pardus')
 
     - name: "Build unattend install config file into OS ISO image"
       include_tasks: rebuild_unattend_install_iso.yml
@@ -74,7 +75,8 @@
         unattend_install_conf is match('Photon') or
         unattend_install_conf is match('Debian') or
         unattend_install_conf is match('Ubuntu/Desktop/Ubiquity') or
-        unattend_install_conf is match('FreeBSD')
+        unattend_install_conf is match('FreeBSD') or
+        unattend_install_conf is match('Pardus')
   when:
     - unattend_install_conf is not match('Ubuntu/Server/')
     - unattend_install_conf is not match('Ubuntu/Desktop/Subiquity')
@@ -143,6 +145,7 @@
     - unattend_install_conf is not match('Debian')
     - unattend_install_conf is not match('Ubuntu/Desktop/Ubiquity')
     - unattend_install_conf is not match('FreeBSD')
+    - unattend_install_conf is not match('Pardus')
 
 - name: "Replace original install ISO file with unattend install ISO file"
   ansible.builtin.set_fact:
@@ -152,7 +155,8 @@
     unattend_install_conf is match('Photon') or
     unattend_install_conf is match('Debian') or
     unattend_install_conf is match('Ubuntu/Desktop/Ubiquity') or
-    unattend_install_conf is match('FreeBSD')
+    unattend_install_conf is match('FreeBSD') or
+    unattend_install_conf is match('Pardus')
 
 - name: "Copy generated unattend install config file to log folder"
   ansible.builtin.copy:

linux/deploy_vm/deploy_vm_from_iso.yml

@@ -267,6 +267,19 @@
         cdrom_controller_num: "{{ vm_cdroms[0].controller_number | int }}"
         cdrom_unit_num: "{{ vm_cdroms[0].unit_number | int }}"
       when: guest_os_ansible_distribution == "Ubuntu"
+
+    - name: "Download serial output file before removing serial port"
+      include_tasks: ../../common/esxi_download_datastore_file.yml
+      vars:
+        src_datastore: "{{ datastore }}"
+        src_file_path: "{{ vm_dir_name }}/{{ vm_serial_port_output_file | basename }}"
+        dest_file_path: "{{ current_test_log_folder }}/{{ vm_serial_port_output_file | basename }}"
+        download_file_fail_ignore: true
+      when: 
+        - vm_dir_name is defined
+        - vm_dir_name
+        - vm_serial_port_output_file is defined
+        - vm_serial_port_output_file
 
     - include_tasks: ../../common/vm_remove_serial_port.yml