-
Notifications
You must be signed in to change notification settings - Fork 31
Home
- Step 1: Flash Edison: Flash Edison
- Note: You may need Xcode installed if you are using the alternate flashing method on OS X
- Step 2: Download and setup XDK: Set up XDK (You will need to register an account)
- Step 2a: Follow these instructions to get Edison online.
- Step 3: Clone this repo containing the Intel XDK sample project with Cylon.js examples for every sensor. or the project for Johnny-Five.
_Note: Make sure that both your development computer and your Intel Edison make use of the same provided Wi-Fi access point or they will not find each other. _
- Download Edison Images
- Intel Arduino IDE (Needed to develop using Arduino sketches
- Intel XDK IoT Edition
- PWM Guide by Emutex
- Cylon.js with Seeed Sensor Kit Tutorial
- Edison CLI
- Johnny-Five Edison
- Mashery APIs for Intel Edison
- Control your Edison with Web Sockets
- Intel Edison + Octoblu
For the standard Yocto-based Edison Linux installation
Follow these instructions: Repo Configuration Instructions
To be able to install these packages: Precompiled packages list for Edison
Check out SparkFun's selection of expansion boards
https://communities.intel.com/docs/DOC-23618
https://github.com/mashery/edison-guides/wiki/Intel-Edison-Wi-Fi-Guide
https://github.com/mashery/edison-guides/wiki/Setting-up-Intel-Edison---Intel-XDK
https://github.com/mashery/edison-guides/wiki/Lets-turn-Intel-Edison-into-an-iBeacon
https://github.com/mashery/edison-guides/wiki/Tethering-Edison-via-SSH-on-OSX---Yosemite