meta-xilinx
===========

This layer provides support for MicroBlaze, Zynq and ZynqMP.

Supported Boards/Machines
=========================

Boards Supported by this layer:
	* Xilinx KC705 Embedded TRD (MicroBlaze)
	* Xilinx ZC702 (Zynq)
	* Xilinx ZC706 (Zynq)
	* Xilinx EP108 (ZynqMP)
	* Avnet/Digilent ZedBoard (Zynq)
	* Avnet MicroZed (Zynq)
	* Avnet PicoZed (Zynq)

QEMU Models Supported by this layer:
	* qemumicroblaze (MicroBlaze)
	* qemuzynq (Zynq)
	* Xilinx EP108 (ZynqMP)

(Please refer to the associate .conf for more information)

Additional information on Xilinx architectures can be found at:
	http://www.xilinx.com/support/index.htm

Maintainers, Patches/Submissions, Community
===========================================

Please send any patches, pull requests, comments or questions for this layer to:

	meta-xilinx@lists.yoctoproject.org

Maintainers:

	Nathan Rossi <nathan.rossi@xilinx.com>

Dependencies
============

This layer depends on:

	URI: git://git.openembedded.org/bitbake

	URI: git://git.openembedded.org/openembedded-core
	layers: meta

Build Instructions
==================

The following instructions require a Poky installation (or equivalent).

Initialize a build using the 'oe-init-build-env' script in Poky. Once
initialized configure bblayers.conf by adding the 'meta-xilinx' layer. e.g.:

	BBLAYERS ?= " \
		<path to layer>/oe-core/meta \
		<path to layer>/meta-xilinx \
		"

To build a specific target BSP configure the associated machine in local.conf:

	MACHINE ?= "zc702-zynq7"

Build the target file system image using bitbake:

	$ bitbake core-image-minimal

Once complete the images for the target machine will be available in the output
directory 'tmp/deploy/images'.

Additional Documentation
========================

Additional documentation can be found in the 'docs/*' directory of this layer.