A UEFI DXE driver to enable Resizable BAR on systems which don't support it officially. This provides performance benefits and is even required for Intel Arc GPUs to function optimally.
Warning
Not compatible with Nvidia Turing GPUs (GTX 1600 and RTX 2000)
Warning
Vulnerable to Spectre
- A USB Drive
- Rufus
- (Required for Intel ARC) Working iGPU
- (Required) A Skylake (6th gen) or Kaby Lake (7th gen) CPU
- (Optional) a Coffee Lake CPU (8th or 9th gen)
- Format your USB drive with Rufus as shown in this screenshot:
- Drag and drop the contents of Installer.zip for Skylake (6th gen) and Kaby Lake (7th gen) CPU or Installer8thGEN.zip for Coffee Lake (8th and 9th gen) CPU to the Root of the USB drive. It should look like this:
Important
Skip this if you are using a Skylake (6th gen) or Kaby Lake (7th gen) CPU
Warning
You will need a Skylake (6th gen) or Kaby Lake (7th gen) CPU for the instalation process
- Boot to BIOS
- Enable CSM
Advanced mode/Boot/CSM/Launch CSM - Enabled/Auto - Enable Above 4G encoding
Advanced mode/Boot/Above 4G Decoding - Enabled- Save changes and exit
- Enable CSM
Warning
If you are using Intel ARC you will have to plug in your iGPU
- Enter the BIOS and boot form the USB
- Wait for the update to finish and reboot
Caution
Do not! power off your computer while updating. This will brick your motherboard. If this happens your motherboard will enter BIOS Recovery mode and it will try to reflash the stock BIOS from the USB (I included the 1301 BIOS in Installer8thGEN.zip so you can reflash it without using a second PC)
I accept no responsibility for bricked motherboards
-
Boot to BIOS and disable CSM
Advanced mode/Boot/CSM/Launch CSM - Disabled -
Enable Above 4G encoding
Advanced mode/Boot Above 4G Decoding - Disabled* Save changes and exit * Now you can plug in your monitor to the dGPU (Intel ARC only) -
Prepare the Coffee Lake (8th and 9th gen) CPU by covering/conecting different pads on the CPU as shown (Green/Blue)
- Install the CPU
Important
Skip this if you are using a Coffee Lake (8th and 9th gen) CPU
- Boot to BIOS
-
Enable CSM
Advanced mode/Boot/CSM/Launch CSM - Enabled/Auto -
Disable Above 4G encoding
Advanced mode/Boot/Above 4G Decoding - Disabled- Save changes and exit
-
Warning
If you are using Intel ARC you will have to plug in your iGPU
- Enter the BIOS and boot form the USB
- Wait for the update to finish and reboot
Caution
Do not! power off your computer while updating. This will brick your motherboard. If this happens your motherboard will enter BIOS Recovery mode and it will try to reflash the stock BIOS from the USB (I included the 1301 BIOS in Installer.zip so you can reflash it without using a second PC)
I accept no responsibility for bricked motherboards
- Boot to BIOS and disable CSM
Advanced mode/Boot/CSM/Launch CSM - Disabled - Enable Above 4G encoding
Advanced mode/Boot/Above 4G Decoding - Enabled - Save changes and exit
- Now you can plug in your monitor to the dGPU (Intel ARC only)
-
Configure ReBAR with Configurator.exe
- You can choose a size of the BAR there (I used value of
32with my Arc A750)- Reboot after saving changes
- You can choose a size of the BAR there (I used value of
Clear CMOS and Resizable BAR should be disabled. Short the two pins labeled as CLRTC or boot with the iGPU and set the correct BAR size
I included the 1301 BIOS in Installer.zip and the board should flash it automaticaly Using the CrashFree BIOS 3 utility
Yes but i do not recomend it because it is dangerous. But if you want to do it this way you can use AFUWIN using the /GAN command No direct link because of DMCA
You can use Linux with 4G Decoding on, recent versions will automatically resize and allocate GPU BARs. Currently there is no known method to get it on Windows without BIOS modification
You can do that but remember that you have to disable ReBAR with Configurator.exe, use a Skylake (6th gen) or Kaby Lake (7th gen) CPU and then you can revert to the original BIOS
- @xCuri0 for ReBarUEFI
- American Megatrends for the AFUDOS Utility
- ASUS for the Original BIOS
- svarmod for CoffeeTime