Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Bump rust version to 1.75.0 #3039

Merged
merged 5 commits into from
Jan 8, 2024
Merged

Conversation

har7an
Copy link
Contributor

@har7an har7an commented Dec 29, 2023

Rust 1.75.0 is the current latest release of the Rust language and toolchains. This change is necessary since I have discovered that with the previously used version, 1.67.0, future releases will no longer be possible. The reason is that cargo publish, even when using the --locked flag, seems to perform its' own package version resolution. During this process it hits an issue with one of our dependencies that has bumped its' MSRV to 1.70.0.

While I think technically this is a bug in the Rust tooling, it's still a nice idea to do the upgrade. The commits in this PR perform the upgrade in "three" steps with Rust versions 1.69, 1.70 and 1.75. I have picked these versions as I think that each of these mentioned something in their CHANGELOG that offers a potential benefit or risk to zellij. For more information, refer to the individual commits.

The quick upshot is: When going from 1.67.0 to 1.75.0, build time (in Debug) drops from ~240 s to ~190 s on my PC (for a clean build), and initial package resolution (from an empty cargo cache) goes down from ~75 s to ~10 s. There are other benefits (e.g. cross-crate inlining) that promise performance improvements, but I do not know how to measure performance at this point. One particular feature that may be of interest is the introduction of native WASM exceptions in Rust 1.72.0 for our plugins, but I have not looked into this any futher so far.

I compiled zellij with each of the new toolchains and made sure they all execute with current main, running on an x86_64-unknown-linux host. Finally, I performed a simulated release with the version compiled with 1.75.0. I can upload the bins if there is interest.

which, compared to the previous 1.67.0, has the following impacts on
`zellij`:

- [Turn off debuginfo for build deps][2]: Increases build time (on my
  machine) from ~230 s in 1.67.0 to ~250 s now, *which is unexpected*

This version also changes [handling of the `default-features` flag][3]
when specifying dependencies in `Cargo.toml`. If a dependent crate
requires `default-features = true` on a crate that is required as
`default-features = false` further up the dependency tree, the `true`
setting "wins". We only specify `default-features = false` for three
crates total:

- `names`: This is used only by us
- `surf`: This is used only by us
- `vte`: This is also required by `strip-ansi-escapes`, but that has
  `default-features = false` as well

How this affects our transitive dependencies is unknown at this point.

[2]: rust-lang/cargo#11252
[3]: rust-lang/cargo#11409
which, compared to the previous 1.69.0, as the following impacts on
`zellij`:

1. [Enable sparse registry checkout for crates.io by default][1]

This drastically increases the time to first build on a fresh rust
installation/a rust installation with a clean cargo registry cache.
Previously it took about 75s to populate the deps/cache (with `cargo
fetch --locked` and ~100 MBit/s network), whereas now the same process
takes ~10 s.

2. [The `OnceCell` type is now part of std][2]

In theory, this would allow us to cut a dependency from `zellij-utils`,
but the `once_cell` crate is pulled in by another 16 deps, so there's no
point in attempting it right now.

Build times and binary sizes are unaffected by this change compared to
the previous 1.69.0 toolchain.

[1]: rust-lang/cargo#11791
[2]: https://doc.rust-lang.org/stable/std/cell/struct.OnceCell.html
which, compared to the previous 1.70.0, has the following impacts on
`zellij`:

1. [cross-crate inlining][8]

This should increase application performance, as functions can now be
inlined across crates.

2. [`async fn` in traits][9]

This would allow us to drop the `async_trait` dependency, but it is
currently still required by 3 other dependencies.

Build time in debug mode (on my own PC) is cut down from 256s to 189s
(for a clean build). Build time in release mode is cut down from 473s to
391s (for a clean build). Binary sizes only change minimally (825 MB ->
807 MB in debug, 29 MB -> 30 MB in release).

[8]: rust-lang/rust#116505
[9]: rust-lang/rust#115822
@har7an har7an merged commit f6d5729 into zellij-org:main Jan 8, 2024
6 checks passed
@har7an har7an deleted the chore/bump-rust-version branch January 8, 2024 17:29
imsnif pushed a commit to aidanhs/zellij that referenced this pull request Jan 18, 2024
* rust-toolchain: Bump toolchain version to 1.69.0

which, compared to the previous 1.67.0, has the following impacts on
`zellij`:

- [Turn off debuginfo for build deps][2]: Increases build time (on my
  machine) from ~230 s in 1.67.0 to ~250 s now, *which is unexpected*

This version also changes [handling of the `default-features` flag][3]
when specifying dependencies in `Cargo.toml`. If a dependent crate
requires `default-features = true` on a crate that is required as
`default-features = false` further up the dependency tree, the `true`
setting "wins". We only specify `default-features = false` for three
crates total:

- `names`: This is used only by us
- `surf`: This is used only by us
- `vte`: This is also required by `strip-ansi-escapes`, but that has
  `default-features = false` as well

How this affects our transitive dependencies is unknown at this point.

[2]: rust-lang/cargo#11252
[3]: rust-lang/cargo#11409

* rust-toolchain: Bump toolchain version to 1.70.0

which, compared to the previous 1.69.0, as the following impacts on
`zellij`:

1. [Enable sparse registry checkout for crates.io by default][1]

This drastically increases the time to first build on a fresh rust
installation/a rust installation with a clean cargo registry cache.
Previously it took about 75s to populate the deps/cache (with `cargo
fetch --locked` and ~100 MBit/s network), whereas now the same process
takes ~10 s.

2. [The `OnceCell` type is now part of std][2]

In theory, this would allow us to cut a dependency from `zellij-utils`,
but the `once_cell` crate is pulled in by another 16 deps, so there's no
point in attempting it right now.

Build times and binary sizes are unaffected by this change compared to
the previous 1.69.0 toolchain.

[1]: rust-lang/cargo#11791
[2]: https://doc.rust-lang.org/stable/std/cell/struct.OnceCell.html

* rust-toolchain: Bump toolchain version to 1.75.0

which, compared to the previous 1.70.0, has the following impacts on
`zellij`:

1. [cross-crate inlining][8]

This should increase application performance, as functions can now be
inlined across crates.

2. [`async fn` in traits][9]

This would allow us to drop the `async_trait` dependency, but it is
currently still required by 3 other dependencies.

Build time in debug mode (on my own PC) is cut down from 256s to 189s
(for a clean build). Build time in release mode is cut down from 473s to
391s (for a clean build). Binary sizes only change minimally (825 MB ->
807 MB in debug, 29 MB -> 30 MB in release).

[8]: rust-lang/rust#116505
[9]: rust-lang/rust#115822

* chore: Apply rustfmt.

* CHANGELOG: Add PR zellij-org#3039.
imsnif added a commit that referenced this pull request Jan 22, 2024
* refactor: Simplify transfer_rows_from_viewport_to_lines_above

next_lines is always consolidated to a single Row, which immediately
gets removed - we can remove some dead code as a result

* perf: Batch remove rows from the viewport for performance

Given a 1MB line catted into the terminal, a toggle-fullscreen +
toggle-fullscreen + close-pane + `run true` goes from ~9s to ~3s

* perf: Optimize Row::drain_until by splitting chars in one step

Given a 10MB line catted into the terminal, a toggle-fullscreen +
toggle-fullscreen + close-pane + `run true` goes from ~23s to ~20s

* refactor: Simplify `if let` into a `.map`

* refactor: There are only new saved coordinates when there were old ones

* refactor: Unify viewport transfer: use common variable names

* fix: Use same saved cursor logic in height resize as width

See #2182 for original introduction that only added it in one branch,
this fixes an issue where the saved cursor was incorrectly reset when
the real cursor was

* fix: Correct saved+real cursor calculations when reflowing long lines

* fix: Don't create canonical lines if cursor ends on EOL after resize

Previously if a 20 character line were split into two 10 character
lines, the cursor would be placed on the line after the two lines.
New characters would then be treated as a new canonical line. This
commit fixes this by biasing cursors to the end of the previous line.

* fix: for cursor index calculation in lines that are already wrapped

* chore: test for real/saved cursor position being handled separately

* chore: Apply cargo format

* chore(repo): update issue templates

* Bump rust version to 1.75.0 (#3039)

* rust-toolchain: Bump toolchain version to 1.69.0

which, compared to the previous 1.67.0, has the following impacts on
`zellij`:

- [Turn off debuginfo for build deps][2]: Increases build time (on my
  machine) from ~230 s in 1.67.0 to ~250 s now, *which is unexpected*

This version also changes [handling of the `default-features` flag][3]
when specifying dependencies in `Cargo.toml`. If a dependent crate
requires `default-features = true` on a crate that is required as
`default-features = false` further up the dependency tree, the `true`
setting "wins". We only specify `default-features = false` for three
crates total:

- `names`: This is used only by us
- `surf`: This is used only by us
- `vte`: This is also required by `strip-ansi-escapes`, but that has
  `default-features = false` as well

How this affects our transitive dependencies is unknown at this point.

[2]: rust-lang/cargo#11252
[3]: rust-lang/cargo#11409

* rust-toolchain: Bump toolchain version to 1.70.0

which, compared to the previous 1.69.0, as the following impacts on
`zellij`:

1. [Enable sparse registry checkout for crates.io by default][1]

This drastically increases the time to first build on a fresh rust
installation/a rust installation with a clean cargo registry cache.
Previously it took about 75s to populate the deps/cache (with `cargo
fetch --locked` and ~100 MBit/s network), whereas now the same process
takes ~10 s.

2. [The `OnceCell` type is now part of std][2]

In theory, this would allow us to cut a dependency from `zellij-utils`,
but the `once_cell` crate is pulled in by another 16 deps, so there's no
point in attempting it right now.

Build times and binary sizes are unaffected by this change compared to
the previous 1.69.0 toolchain.

[1]: rust-lang/cargo#11791
[2]: https://doc.rust-lang.org/stable/std/cell/struct.OnceCell.html

* rust-toolchain: Bump toolchain version to 1.75.0

which, compared to the previous 1.70.0, has the following impacts on
`zellij`:

1. [cross-crate inlining][8]

This should increase application performance, as functions can now be
inlined across crates.

2. [`async fn` in traits][9]

This would allow us to drop the `async_trait` dependency, but it is
currently still required by 3 other dependencies.

Build time in debug mode (on my own PC) is cut down from 256s to 189s
(for a clean build). Build time in release mode is cut down from 473s to
391s (for a clean build). Binary sizes only change minimally (825 MB ->
807 MB in debug, 29 MB -> 30 MB in release).

[8]: rust-lang/rust#116505
[9]: rust-lang/rust#115822

* chore: Apply rustfmt.

* CHANGELOG: Add PR #3039.

* feat(plugins): introduce 'pipes', allowing users to pipe data to and control plugins from the command line (#3066)

* prototype - working with message from the cli

* prototype - pipe from the CLI to plugins

* prototype - pipe from the CLI to plugins and back again

* prototype - working with better cli interface

* prototype - working after removing unused stuff

* prototype - working with launching plugin if it is not launched, also fixed event ordering

* refactor: change message to cli-message

* prototype - allow plugins to send messages to each other

* fix: allow cli messages to send plugin parameters (and implement backpressure)

* fix: use input_pipe_id to identify cli pipes instead of their message name

* fix: come cleanups and add skip_cache parameter

* fix: pipe/client-server communication robustness

* fix: leaking messages between plugins while loading

* feat: allow plugins to specify how a new plugin instance is launched when sending messages

* fix: add permissions

* refactor: adjust cli api

* fix: improve cli plugin loading error messages

* docs: cli pipe

* fix: take plugin configuration into account when messaging between plugins

* refactor: pipe message protobuf interface

* refactor: update(event) -> pipe

* refactor - rename CliMessage to CliPipe

* fix: add is_private to pipes and change some naming

* refactor - cli client

* refactor: various cleanups

* style(fmt): rustfmt

* fix(pipes): backpressure across multiple plugins

* style: some cleanups

* style(fmt): rustfmt

* style: fix merge conflict mistake

* style(wording): clarify pipe permission

* docs(changelog): introduce pipes

* fix: add some robustness and future proofing

* fix e2e tests

---------

Co-authored-by: Aram Drevekenin <aram@poor.dev>
Co-authored-by: har7an <99636919+har7an@users.noreply.github.com>
imsnif pushed a commit to aidanhs/zellij that referenced this pull request Jan 22, 2024
* rust-toolchain: Bump toolchain version to 1.69.0

which, compared to the previous 1.67.0, has the following impacts on
`zellij`:

- [Turn off debuginfo for build deps][2]: Increases build time (on my
  machine) from ~230 s in 1.67.0 to ~250 s now, *which is unexpected*

This version also changes [handling of the `default-features` flag][3]
when specifying dependencies in `Cargo.toml`. If a dependent crate
requires `default-features = true` on a crate that is required as
`default-features = false` further up the dependency tree, the `true`
setting "wins". We only specify `default-features = false` for three
crates total:

- `names`: This is used only by us
- `surf`: This is used only by us
- `vte`: This is also required by `strip-ansi-escapes`, but that has
  `default-features = false` as well

How this affects our transitive dependencies is unknown at this point.

[2]: rust-lang/cargo#11252
[3]: rust-lang/cargo#11409

* rust-toolchain: Bump toolchain version to 1.70.0

which, compared to the previous 1.69.0, as the following impacts on
`zellij`:

1. [Enable sparse registry checkout for crates.io by default][1]

This drastically increases the time to first build on a fresh rust
installation/a rust installation with a clean cargo registry cache.
Previously it took about 75s to populate the deps/cache (with `cargo
fetch --locked` and ~100 MBit/s network), whereas now the same process
takes ~10 s.

2. [The `OnceCell` type is now part of std][2]

In theory, this would allow us to cut a dependency from `zellij-utils`,
but the `once_cell` crate is pulled in by another 16 deps, so there's no
point in attempting it right now.

Build times and binary sizes are unaffected by this change compared to
the previous 1.69.0 toolchain.

[1]: rust-lang/cargo#11791
[2]: https://doc.rust-lang.org/stable/std/cell/struct.OnceCell.html

* rust-toolchain: Bump toolchain version to 1.75.0

which, compared to the previous 1.70.0, has the following impacts on
`zellij`:

1. [cross-crate inlining][8]

This should increase application performance, as functions can now be
inlined across crates.

2. [`async fn` in traits][9]

This would allow us to drop the `async_trait` dependency, but it is
currently still required by 3 other dependencies.

Build time in debug mode (on my own PC) is cut down from 256s to 189s
(for a clean build). Build time in release mode is cut down from 473s to
391s (for a clean build). Binary sizes only change minimally (825 MB ->
807 MB in debug, 29 MB -> 30 MB in release).

[8]: rust-lang/rust#116505
[9]: rust-lang/rust#115822

* chore: Apply rustfmt.

* CHANGELOG: Add PR zellij-org#3039.
imsnif added a commit to aidanhs/zellij that referenced this pull request Jan 22, 2024
…3032)

* refactor: Simplify transfer_rows_from_viewport_to_lines_above

next_lines is always consolidated to a single Row, which immediately
gets removed - we can remove some dead code as a result

* perf: Batch remove rows from the viewport for performance

Given a 1MB line catted into the terminal, a toggle-fullscreen +
toggle-fullscreen + close-pane + `run true` goes from ~9s to ~3s

* perf: Optimize Row::drain_until by splitting chars in one step

Given a 10MB line catted into the terminal, a toggle-fullscreen +
toggle-fullscreen + close-pane + `run true` goes from ~23s to ~20s

* refactor: Simplify `if let` into a `.map`

* refactor: There are only new saved coordinates when there were old ones

* refactor: Unify viewport transfer: use common variable names

* fix: Use same saved cursor logic in height resize as width

See zellij-org#2182 for original introduction that only added it in one branch,
this fixes an issue where the saved cursor was incorrectly reset when
the real cursor was

* fix: Correct saved+real cursor calculations when reflowing long lines

* fix: Don't create canonical lines if cursor ends on EOL after resize

Previously if a 20 character line were split into two 10 character
lines, the cursor would be placed on the line after the two lines.
New characters would then be treated as a new canonical line. This
commit fixes this by biasing cursors to the end of the previous line.

* fix: for cursor index calculation in lines that are already wrapped

* chore: test for real/saved cursor position being handled separately

* chore: Apply cargo format

* chore(repo): update issue templates

* Bump rust version to 1.75.0 (zellij-org#3039)

* rust-toolchain: Bump toolchain version to 1.69.0

which, compared to the previous 1.67.0, has the following impacts on
`zellij`:

- [Turn off debuginfo for build deps][2]: Increases build time (on my
  machine) from ~230 s in 1.67.0 to ~250 s now, *which is unexpected*

This version also changes [handling of the `default-features` flag][3]
when specifying dependencies in `Cargo.toml`. If a dependent crate
requires `default-features = true` on a crate that is required as
`default-features = false` further up the dependency tree, the `true`
setting "wins". We only specify `default-features = false` for three
crates total:

- `names`: This is used only by us
- `surf`: This is used only by us
- `vte`: This is also required by `strip-ansi-escapes`, but that has
  `default-features = false` as well

How this affects our transitive dependencies is unknown at this point.

[2]: rust-lang/cargo#11252
[3]: rust-lang/cargo#11409

* rust-toolchain: Bump toolchain version to 1.70.0

which, compared to the previous 1.69.0, as the following impacts on
`zellij`:

1. [Enable sparse registry checkout for crates.io by default][1]

This drastically increases the time to first build on a fresh rust
installation/a rust installation with a clean cargo registry cache.
Previously it took about 75s to populate the deps/cache (with `cargo
fetch --locked` and ~100 MBit/s network), whereas now the same process
takes ~10 s.

2. [The `OnceCell` type is now part of std][2]

In theory, this would allow us to cut a dependency from `zellij-utils`,
but the `once_cell` crate is pulled in by another 16 deps, so there's no
point in attempting it right now.

Build times and binary sizes are unaffected by this change compared to
the previous 1.69.0 toolchain.

[1]: rust-lang/cargo#11791
[2]: https://doc.rust-lang.org/stable/std/cell/struct.OnceCell.html

* rust-toolchain: Bump toolchain version to 1.75.0

which, compared to the previous 1.70.0, has the following impacts on
`zellij`:

1. [cross-crate inlining][8]

This should increase application performance, as functions can now be
inlined across crates.

2. [`async fn` in traits][9]

This would allow us to drop the `async_trait` dependency, but it is
currently still required by 3 other dependencies.

Build time in debug mode (on my own PC) is cut down from 256s to 189s
(for a clean build). Build time in release mode is cut down from 473s to
391s (for a clean build). Binary sizes only change minimally (825 MB ->
807 MB in debug, 29 MB -> 30 MB in release).

[8]: rust-lang/rust#116505
[9]: rust-lang/rust#115822

* chore: Apply rustfmt.

* CHANGELOG: Add PR zellij-org#3039.

* feat(plugins): introduce 'pipes', allowing users to pipe data to and control plugins from the command line (zellij-org#3066)

* prototype - working with message from the cli

* prototype - pipe from the CLI to plugins

* prototype - pipe from the CLI to plugins and back again

* prototype - working with better cli interface

* prototype - working after removing unused stuff

* prototype - working with launching plugin if it is not launched, also fixed event ordering

* refactor: change message to cli-message

* prototype - allow plugins to send messages to each other

* fix: allow cli messages to send plugin parameters (and implement backpressure)

* fix: use input_pipe_id to identify cli pipes instead of their message name

* fix: come cleanups and add skip_cache parameter

* fix: pipe/client-server communication robustness

* fix: leaking messages between plugins while loading

* feat: allow plugins to specify how a new plugin instance is launched when sending messages

* fix: add permissions

* refactor: adjust cli api

* fix: improve cli plugin loading error messages

* docs: cli pipe

* fix: take plugin configuration into account when messaging between plugins

* refactor: pipe message protobuf interface

* refactor: update(event) -> pipe

* refactor - rename CliMessage to CliPipe

* fix: add is_private to pipes and change some naming

* refactor - cli client

* refactor: various cleanups

* style(fmt): rustfmt

* fix(pipes): backpressure across multiple plugins

* style: some cleanups

* style(fmt): rustfmt

* style: fix merge conflict mistake

* style(wording): clarify pipe permission

* docs(changelog): introduce pipes

* fix: add some robustness and future proofing

* fix e2e tests

---------

Co-authored-by: Aram Drevekenin <aram@poor.dev>
Co-authored-by: har7an <99636919+har7an@users.noreply.github.com>
imsnif added a commit that referenced this pull request Jan 22, 2024
… reducing size of TerminalCharacter (#3043)

* refactor: Simplify transfer_rows_from_viewport_to_lines_above

next_lines is always consolidated to a single Row, which immediately
gets removed - we can remove some dead code as a result

* perf: Batch remove rows from the viewport for performance

Given a 1MB line catted into the terminal, a toggle-fullscreen +
toggle-fullscreen + close-pane + `run true` goes from ~9s to ~3s

* perf: Optimize Row::drain_until by splitting chars in one step

Given a 10MB line catted into the terminal, a toggle-fullscreen +
toggle-fullscreen + close-pane + `run true` goes from ~23s to ~20s

* refactor: Simplify `if let` into a `.map`

* refactor: There are only new saved coordinates when there were old ones

* refactor: Unify viewport transfer: use common variable names

* fix: Use same saved cursor logic in height resize as width

See #2182 for original introduction that only added it in one branch,
this fixes an issue where the saved cursor was incorrectly reset when
the real cursor was

* fix: Correct saved+real cursor calculations when reflowing long lines

* fix: Don't create canonical lines if cursor ends on EOL after resize

Previously if a 20 character line were split into two 10 character
lines, the cursor would be placed on the line after the two lines.
New characters would then be treated as a new canonical line. This
commit fixes this by biasing cursors to the end of the previous line.

* fix: for cursor index calculation in lines that are already wrapped

* chore: test for real/saved cursor position being handled separately

* chore: Apply cargo format

* refactor: Unify viewport transfer: transfer + cursor update together

* perf: Reduce size of TerminalCharacter from 72 to 60 bytes

With a 10MB single line catted into a fresh terminal, VmRSS goes from
964092 kB to 874020 kB (as reported by /proc/<pid>/status) before/after
this patch

Given a 10MB line catted into the terminal, a toggle-fullscreen +
toggle-fullscreen + close-pane + `run true` goes from ~15s to ~12.5s

* fix(build): Don't unconditionally rebuild zellij-utils

* refactor: Remove Copy impl on TerminalCharacter

* perf: Rc styles to reduce TerminalCharacter from 60 to 24 bytes

With a 10MB single line catted into a fresh terminal, VmRSS goes from
845156 kB to 478396 kB (as reported by /proc/<pid>/status) before/after
this patch

Given a 10MB line catted into the terminal, a toggle-fullscreen +
toggle-fullscreen + close-pane + `run true` goes from ~12.5s to ~7s

* perf: Remove RcCharacterStyles::Default, allow enum niche optimisation

This reduces TerminalCharacter from 24 to 16 bytes

With a 10MB single line catted into a fresh terminal, VmRSS goes from
478396 kB to 398108 kB (as reported by /proc/<pid>/status) before/after
this patch

Given a 10MB line catted into the terminal, a toggle-fullscreen +
toggle-fullscreen + close-pane + `run true` goes from ~7s to ~4.75s

* docs: link anchor omission from reset_all is deliberate

reset_all is only used from ansi params, and ansi params don't control
link anchor

* fix: Remove no-op on variable that gets immediately dropped

* refactor: Simplify replace_character_at logic

The original condition checked absolute_x_index was in bounds, then
used the index to manipulate it. This is equivalent to getting a
ref to the character at that position and manipulating directly

* chore: Run xtask format

* chore(repo): update issue templates

* Bump rust version to 1.75.0 (#3039)

* rust-toolchain: Bump toolchain version to 1.69.0

which, compared to the previous 1.67.0, has the following impacts on
`zellij`:

- [Turn off debuginfo for build deps][2]: Increases build time (on my
  machine) from ~230 s in 1.67.0 to ~250 s now, *which is unexpected*

This version also changes [handling of the `default-features` flag][3]
when specifying dependencies in `Cargo.toml`. If a dependent crate
requires `default-features = true` on a crate that is required as
`default-features = false` further up the dependency tree, the `true`
setting "wins". We only specify `default-features = false` for three
crates total:

- `names`: This is used only by us
- `surf`: This is used only by us
- `vte`: This is also required by `strip-ansi-escapes`, but that has
  `default-features = false` as well

How this affects our transitive dependencies is unknown at this point.

[2]: rust-lang/cargo#11252
[3]: rust-lang/cargo#11409

* rust-toolchain: Bump toolchain version to 1.70.0

which, compared to the previous 1.69.0, as the following impacts on
`zellij`:

1. [Enable sparse registry checkout for crates.io by default][1]

This drastically increases the time to first build on a fresh rust
installation/a rust installation with a clean cargo registry cache.
Previously it took about 75s to populate the deps/cache (with `cargo
fetch --locked` and ~100 MBit/s network), whereas now the same process
takes ~10 s.

2. [The `OnceCell` type is now part of std][2]

In theory, this would allow us to cut a dependency from `zellij-utils`,
but the `once_cell` crate is pulled in by another 16 deps, so there's no
point in attempting it right now.

Build times and binary sizes are unaffected by this change compared to
the previous 1.69.0 toolchain.

[1]: rust-lang/cargo#11791
[2]: https://doc.rust-lang.org/stable/std/cell/struct.OnceCell.html

* rust-toolchain: Bump toolchain version to 1.75.0

which, compared to the previous 1.70.0, has the following impacts on
`zellij`:

1. [cross-crate inlining][8]

This should increase application performance, as functions can now be
inlined across crates.

2. [`async fn` in traits][9]

This would allow us to drop the `async_trait` dependency, but it is
currently still required by 3 other dependencies.

Build time in debug mode (on my own PC) is cut down from 256s to 189s
(for a clean build). Build time in release mode is cut down from 473s to
391s (for a clean build). Binary sizes only change minimally (825 MB ->
807 MB in debug, 29 MB -> 30 MB in release).

[8]: rust-lang/rust#116505
[9]: rust-lang/rust#115822

* chore: Apply rustfmt.

* CHANGELOG: Add PR #3039.

* feat(plugins): introduce 'pipes', allowing users to pipe data to and control plugins from the command line (#3066)

* prototype - working with message from the cli

* prototype - pipe from the CLI to plugins

* prototype - pipe from the CLI to plugins and back again

* prototype - working with better cli interface

* prototype - working after removing unused stuff

* prototype - working with launching plugin if it is not launched, also fixed event ordering

* refactor: change message to cli-message

* prototype - allow plugins to send messages to each other

* fix: allow cli messages to send plugin parameters (and implement backpressure)

* fix: use input_pipe_id to identify cli pipes instead of their message name

* fix: come cleanups and add skip_cache parameter

* fix: pipe/client-server communication robustness

* fix: leaking messages between plugins while loading

* feat: allow plugins to specify how a new plugin instance is launched when sending messages

* fix: add permissions

* refactor: adjust cli api

* fix: improve cli plugin loading error messages

* docs: cli pipe

* fix: take plugin configuration into account when messaging between plugins

* refactor: pipe message protobuf interface

* refactor: update(event) -> pipe

* refactor - rename CliMessage to CliPipe

* fix: add is_private to pipes and change some naming

* refactor - cli client

* refactor: various cleanups

* style(fmt): rustfmt

* fix(pipes): backpressure across multiple plugins

* style: some cleanups

* style(fmt): rustfmt

* style: fix merge conflict mistake

* style(wording): clarify pipe permission

* docs(changelog): introduce pipes

* xtask: Disable pusing during publish (#3040)

* xtask: Add `--no-push` flag to `publish`

which can be used when simulating releases to work without a writable
git fork of the zellij code.

* xtask: Fix borrow issues

* xtask/pipe: Require lockfile in publish

to avoid errors from invalid dependency versions.

* CHANGELOG: Add PR #3040.

* fix(terminal): some real/saved cursor bugs during resize (#3032)

* refactor: Simplify transfer_rows_from_viewport_to_lines_above

next_lines is always consolidated to a single Row, which immediately
gets removed - we can remove some dead code as a result

* perf: Batch remove rows from the viewport for performance

Given a 1MB line catted into the terminal, a toggle-fullscreen +
toggle-fullscreen + close-pane + `run true` goes from ~9s to ~3s

* perf: Optimize Row::drain_until by splitting chars in one step

Given a 10MB line catted into the terminal, a toggle-fullscreen +
toggle-fullscreen + close-pane + `run true` goes from ~23s to ~20s

* refactor: Simplify `if let` into a `.map`

* refactor: There are only new saved coordinates when there were old ones

* refactor: Unify viewport transfer: use common variable names

* fix: Use same saved cursor logic in height resize as width

See #2182 for original introduction that only added it in one branch,
this fixes an issue where the saved cursor was incorrectly reset when
the real cursor was

* fix: Correct saved+real cursor calculations when reflowing long lines

* fix: Don't create canonical lines if cursor ends on EOL after resize

Previously if a 20 character line were split into two 10 character
lines, the cursor would be placed on the line after the two lines.
New characters would then be treated as a new canonical line. This
commit fixes this by biasing cursors to the end of the previous line.

* fix: for cursor index calculation in lines that are already wrapped

* chore: test for real/saved cursor position being handled separately

* chore: Apply cargo format

* chore(repo): update issue templates

* Bump rust version to 1.75.0 (#3039)

* rust-toolchain: Bump toolchain version to 1.69.0

which, compared to the previous 1.67.0, has the following impacts on
`zellij`:

- [Turn off debuginfo for build deps][2]: Increases build time (on my
  machine) from ~230 s in 1.67.0 to ~250 s now, *which is unexpected*

This version also changes [handling of the `default-features` flag][3]
when specifying dependencies in `Cargo.toml`. If a dependent crate
requires `default-features = true` on a crate that is required as
`default-features = false` further up the dependency tree, the `true`
setting "wins". We only specify `default-features = false` for three
crates total:

- `names`: This is used only by us
- `surf`: This is used only by us
- `vte`: This is also required by `strip-ansi-escapes`, but that has
  `default-features = false` as well

How this affects our transitive dependencies is unknown at this point.

[2]: rust-lang/cargo#11252
[3]: rust-lang/cargo#11409

* rust-toolchain: Bump toolchain version to 1.70.0

which, compared to the previous 1.69.0, as the following impacts on
`zellij`:

1. [Enable sparse registry checkout for crates.io by default][1]

This drastically increases the time to first build on a fresh rust
installation/a rust installation with a clean cargo registry cache.
Previously it took about 75s to populate the deps/cache (with `cargo
fetch --locked` and ~100 MBit/s network), whereas now the same process
takes ~10 s.

2. [The `OnceCell` type is now part of std][2]

In theory, this would allow us to cut a dependency from `zellij-utils`,
but the `once_cell` crate is pulled in by another 16 deps, so there's no
point in attempting it right now.

Build times and binary sizes are unaffected by this change compared to
the previous 1.69.0 toolchain.

[1]: rust-lang/cargo#11791
[2]: https://doc.rust-lang.org/stable/std/cell/struct.OnceCell.html

* rust-toolchain: Bump toolchain version to 1.75.0

which, compared to the previous 1.70.0, has the following impacts on
`zellij`:

1. [cross-crate inlining][8]

This should increase application performance, as functions can now be
inlined across crates.

2. [`async fn` in traits][9]

This would allow us to drop the `async_trait` dependency, but it is
currently still required by 3 other dependencies.

Build time in debug mode (on my own PC) is cut down from 256s to 189s
(for a clean build). Build time in release mode is cut down from 473s to
391s (for a clean build). Binary sizes only change minimally (825 MB ->
807 MB in debug, 29 MB -> 30 MB in release).

[8]: rust-lang/rust#116505
[9]: rust-lang/rust#115822

* chore: Apply rustfmt.

* CHANGELOG: Add PR #3039.

* feat(plugins): introduce 'pipes', allowing users to pipe data to and control plugins from the command line (#3066)

* prototype - working with message from the cli

* prototype - pipe from the CLI to plugins

* prototype - pipe from the CLI to plugins and back again

* prototype - working with better cli interface

* prototype - working after removing unused stuff

* prototype - working with launching plugin if it is not launched, also fixed event ordering

* refactor: change message to cli-message

* prototype - allow plugins to send messages to each other

* fix: allow cli messages to send plugin parameters (and implement backpressure)

* fix: use input_pipe_id to identify cli pipes instead of their message name

* fix: come cleanups and add skip_cache parameter

* fix: pipe/client-server communication robustness

* fix: leaking messages between plugins while loading

* feat: allow plugins to specify how a new plugin instance is launched when sending messages

* fix: add permissions

* refactor: adjust cli api

* fix: improve cli plugin loading error messages

* docs: cli pipe

* fix: take plugin configuration into account when messaging between plugins

* refactor: pipe message protobuf interface

* refactor: update(event) -> pipe

* refactor - rename CliMessage to CliPipe

* fix: add is_private to pipes and change some naming

* refactor - cli client

* refactor: various cleanups

* style(fmt): rustfmt

* fix(pipes): backpressure across multiple plugins

* style: some cleanups

* style(fmt): rustfmt

* style: fix merge conflict mistake

* style(wording): clarify pipe permission

* docs(changelog): introduce pipes

* fix: add some robustness and future proofing

* fix e2e tests

---------

Co-authored-by: Aram Drevekenin <aram@poor.dev>
Co-authored-by: har7an <99636919+har7an@users.noreply.github.com>

* fix integer overflow again (oops)

---------

Co-authored-by: Aram Drevekenin <aram@poor.dev>
Co-authored-by: har7an <99636919+har7an@users.noreply.github.com>
xuanyuan300 pushed a commit to trysthout/zellij that referenced this pull request Jan 23, 2024
* rust-toolchain: Bump toolchain version to 1.69.0

which, compared to the previous 1.67.0, has the following impacts on
`zellij`:

- [Turn off debuginfo for build deps][2]: Increases build time (on my
  machine) from ~230 s in 1.67.0 to ~250 s now, *which is unexpected*

This version also changes [handling of the `default-features` flag][3]
when specifying dependencies in `Cargo.toml`. If a dependent crate
requires `default-features = true` on a crate that is required as
`default-features = false` further up the dependency tree, the `true`
setting "wins". We only specify `default-features = false` for three
crates total:

- `names`: This is used only by us
- `surf`: This is used only by us
- `vte`: This is also required by `strip-ansi-escapes`, but that has
  `default-features = false` as well

How this affects our transitive dependencies is unknown at this point.

[2]: rust-lang/cargo#11252
[3]: rust-lang/cargo#11409

* rust-toolchain: Bump toolchain version to 1.70.0

which, compared to the previous 1.69.0, as the following impacts on
`zellij`:

1. [Enable sparse registry checkout for crates.io by default][1]

This drastically increases the time to first build on a fresh rust
installation/a rust installation with a clean cargo registry cache.
Previously it took about 75s to populate the deps/cache (with `cargo
fetch --locked` and ~100 MBit/s network), whereas now the same process
takes ~10 s.

2. [The `OnceCell` type is now part of std][2]

In theory, this would allow us to cut a dependency from `zellij-utils`,
but the `once_cell` crate is pulled in by another 16 deps, so there's no
point in attempting it right now.

Build times and binary sizes are unaffected by this change compared to
the previous 1.69.0 toolchain.

[1]: rust-lang/cargo#11791
[2]: https://doc.rust-lang.org/stable/std/cell/struct.OnceCell.html

* rust-toolchain: Bump toolchain version to 1.75.0

which, compared to the previous 1.70.0, has the following impacts on
`zellij`:

1. [cross-crate inlining][8]

This should increase application performance, as functions can now be
inlined across crates.

2. [`async fn` in traits][9]

This would allow us to drop the `async_trait` dependency, but it is
currently still required by 3 other dependencies.

Build time in debug mode (on my own PC) is cut down from 256s to 189s
(for a clean build). Build time in release mode is cut down from 473s to
391s (for a clean build). Binary sizes only change minimally (825 MB ->
807 MB in debug, 29 MB -> 30 MB in release).

[8]: rust-lang/rust#116505
[9]: rust-lang/rust#115822

* chore: Apply rustfmt.

* CHANGELOG: Add PR zellij-org#3039.
xuanyuan300 pushed a commit to trysthout/zellij that referenced this pull request Jan 23, 2024
…3032)

* refactor: Simplify transfer_rows_from_viewport_to_lines_above

next_lines is always consolidated to a single Row, which immediately
gets removed - we can remove some dead code as a result

* perf: Batch remove rows from the viewport for performance

Given a 1MB line catted into the terminal, a toggle-fullscreen +
toggle-fullscreen + close-pane + `run true` goes from ~9s to ~3s

* perf: Optimize Row::drain_until by splitting chars in one step

Given a 10MB line catted into the terminal, a toggle-fullscreen +
toggle-fullscreen + close-pane + `run true` goes from ~23s to ~20s

* refactor: Simplify `if let` into a `.map`

* refactor: There are only new saved coordinates when there were old ones

* refactor: Unify viewport transfer: use common variable names

* fix: Use same saved cursor logic in height resize as width

See zellij-org#2182 for original introduction that only added it in one branch,
this fixes an issue where the saved cursor was incorrectly reset when
the real cursor was

* fix: Correct saved+real cursor calculations when reflowing long lines

* fix: Don't create canonical lines if cursor ends on EOL after resize

Previously if a 20 character line were split into two 10 character
lines, the cursor would be placed on the line after the two lines.
New characters would then be treated as a new canonical line. This
commit fixes this by biasing cursors to the end of the previous line.

* fix: for cursor index calculation in lines that are already wrapped

* chore: test for real/saved cursor position being handled separately

* chore: Apply cargo format

* chore(repo): update issue templates

* Bump rust version to 1.75.0 (zellij-org#3039)

* rust-toolchain: Bump toolchain version to 1.69.0

which, compared to the previous 1.67.0, has the following impacts on
`zellij`:

- [Turn off debuginfo for build deps][2]: Increases build time (on my
  machine) from ~230 s in 1.67.0 to ~250 s now, *which is unexpected*

This version also changes [handling of the `default-features` flag][3]
when specifying dependencies in `Cargo.toml`. If a dependent crate
requires `default-features = true` on a crate that is required as
`default-features = false` further up the dependency tree, the `true`
setting "wins". We only specify `default-features = false` for three
crates total:

- `names`: This is used only by us
- `surf`: This is used only by us
- `vte`: This is also required by `strip-ansi-escapes`, but that has
  `default-features = false` as well

How this affects our transitive dependencies is unknown at this point.

[2]: rust-lang/cargo#11252
[3]: rust-lang/cargo#11409

* rust-toolchain: Bump toolchain version to 1.70.0

which, compared to the previous 1.69.0, as the following impacts on
`zellij`:

1. [Enable sparse registry checkout for crates.io by default][1]

This drastically increases the time to first build on a fresh rust
installation/a rust installation with a clean cargo registry cache.
Previously it took about 75s to populate the deps/cache (with `cargo
fetch --locked` and ~100 MBit/s network), whereas now the same process
takes ~10 s.

2. [The `OnceCell` type is now part of std][2]

In theory, this would allow us to cut a dependency from `zellij-utils`,
but the `once_cell` crate is pulled in by another 16 deps, so there's no
point in attempting it right now.

Build times and binary sizes are unaffected by this change compared to
the previous 1.69.0 toolchain.

[1]: rust-lang/cargo#11791
[2]: https://doc.rust-lang.org/stable/std/cell/struct.OnceCell.html

* rust-toolchain: Bump toolchain version to 1.75.0

which, compared to the previous 1.70.0, has the following impacts on
`zellij`:

1. [cross-crate inlining][8]

This should increase application performance, as functions can now be
inlined across crates.

2. [`async fn` in traits][9]

This would allow us to drop the `async_trait` dependency, but it is
currently still required by 3 other dependencies.

Build time in debug mode (on my own PC) is cut down from 256s to 189s
(for a clean build). Build time in release mode is cut down from 473s to
391s (for a clean build). Binary sizes only change minimally (825 MB ->
807 MB in debug, 29 MB -> 30 MB in release).

[8]: rust-lang/rust#116505
[9]: rust-lang/rust#115822

* chore: Apply rustfmt.

* CHANGELOG: Add PR zellij-org#3039.

* feat(plugins): introduce 'pipes', allowing users to pipe data to and control plugins from the command line (zellij-org#3066)

* prototype - working with message from the cli

* prototype - pipe from the CLI to plugins

* prototype - pipe from the CLI to plugins and back again

* prototype - working with better cli interface

* prototype - working after removing unused stuff

* prototype - working with launching plugin if it is not launched, also fixed event ordering

* refactor: change message to cli-message

* prototype - allow plugins to send messages to each other

* fix: allow cli messages to send plugin parameters (and implement backpressure)

* fix: use input_pipe_id to identify cli pipes instead of their message name

* fix: come cleanups and add skip_cache parameter

* fix: pipe/client-server communication robustness

* fix: leaking messages between plugins while loading

* feat: allow plugins to specify how a new plugin instance is launched when sending messages

* fix: add permissions

* refactor: adjust cli api

* fix: improve cli plugin loading error messages

* docs: cli pipe

* fix: take plugin configuration into account when messaging between plugins

* refactor: pipe message protobuf interface

* refactor: update(event) -> pipe

* refactor - rename CliMessage to CliPipe

* fix: add is_private to pipes and change some naming

* refactor - cli client

* refactor: various cleanups

* style(fmt): rustfmt

* fix(pipes): backpressure across multiple plugins

* style: some cleanups

* style(fmt): rustfmt

* style: fix merge conflict mistake

* style(wording): clarify pipe permission

* docs(changelog): introduce pipes

* fix: add some robustness and future proofing

* fix e2e tests

---------

Co-authored-by: Aram Drevekenin <aram@poor.dev>
Co-authored-by: har7an <99636919+har7an@users.noreply.github.com>
xuanyuan300 pushed a commit to trysthout/zellij that referenced this pull request Jan 23, 2024
… reducing size of TerminalCharacter (zellij-org#3043)

* refactor: Simplify transfer_rows_from_viewport_to_lines_above

next_lines is always consolidated to a single Row, which immediately
gets removed - we can remove some dead code as a result

* perf: Batch remove rows from the viewport for performance

Given a 1MB line catted into the terminal, a toggle-fullscreen +
toggle-fullscreen + close-pane + `run true` goes from ~9s to ~3s

* perf: Optimize Row::drain_until by splitting chars in one step

Given a 10MB line catted into the terminal, a toggle-fullscreen +
toggle-fullscreen + close-pane + `run true` goes from ~23s to ~20s

* refactor: Simplify `if let` into a `.map`

* refactor: There are only new saved coordinates when there were old ones

* refactor: Unify viewport transfer: use common variable names

* fix: Use same saved cursor logic in height resize as width

See zellij-org#2182 for original introduction that only added it in one branch,
this fixes an issue where the saved cursor was incorrectly reset when
the real cursor was

* fix: Correct saved+real cursor calculations when reflowing long lines

* fix: Don't create canonical lines if cursor ends on EOL after resize

Previously if a 20 character line were split into two 10 character
lines, the cursor would be placed on the line after the two lines.
New characters would then be treated as a new canonical line. This
commit fixes this by biasing cursors to the end of the previous line.

* fix: for cursor index calculation in lines that are already wrapped

* chore: test for real/saved cursor position being handled separately

* chore: Apply cargo format

* refactor: Unify viewport transfer: transfer + cursor update together

* perf: Reduce size of TerminalCharacter from 72 to 60 bytes

With a 10MB single line catted into a fresh terminal, VmRSS goes from
964092 kB to 874020 kB (as reported by /proc/<pid>/status) before/after
this patch

Given a 10MB line catted into the terminal, a toggle-fullscreen +
toggle-fullscreen + close-pane + `run true` goes from ~15s to ~12.5s

* fix(build): Don't unconditionally rebuild zellij-utils

* refactor: Remove Copy impl on TerminalCharacter

* perf: Rc styles to reduce TerminalCharacter from 60 to 24 bytes

With a 10MB single line catted into a fresh terminal, VmRSS goes from
845156 kB to 478396 kB (as reported by /proc/<pid>/status) before/after
this patch

Given a 10MB line catted into the terminal, a toggle-fullscreen +
toggle-fullscreen + close-pane + `run true` goes from ~12.5s to ~7s

* perf: Remove RcCharacterStyles::Default, allow enum niche optimisation

This reduces TerminalCharacter from 24 to 16 bytes

With a 10MB single line catted into a fresh terminal, VmRSS goes from
478396 kB to 398108 kB (as reported by /proc/<pid>/status) before/after
this patch

Given a 10MB line catted into the terminal, a toggle-fullscreen +
toggle-fullscreen + close-pane + `run true` goes from ~7s to ~4.75s

* docs: link anchor omission from reset_all is deliberate

reset_all is only used from ansi params, and ansi params don't control
link anchor

* fix: Remove no-op on variable that gets immediately dropped

* refactor: Simplify replace_character_at logic

The original condition checked absolute_x_index was in bounds, then
used the index to manipulate it. This is equivalent to getting a
ref to the character at that position and manipulating directly

* chore: Run xtask format

* chore(repo): update issue templates

* Bump rust version to 1.75.0 (zellij-org#3039)

* rust-toolchain: Bump toolchain version to 1.69.0

which, compared to the previous 1.67.0, has the following impacts on
`zellij`:

- [Turn off debuginfo for build deps][2]: Increases build time (on my
  machine) from ~230 s in 1.67.0 to ~250 s now, *which is unexpected*

This version also changes [handling of the `default-features` flag][3]
when specifying dependencies in `Cargo.toml`. If a dependent crate
requires `default-features = true` on a crate that is required as
`default-features = false` further up the dependency tree, the `true`
setting "wins". We only specify `default-features = false` for three
crates total:

- `names`: This is used only by us
- `surf`: This is used only by us
- `vte`: This is also required by `strip-ansi-escapes`, but that has
  `default-features = false` as well

How this affects our transitive dependencies is unknown at this point.

[2]: rust-lang/cargo#11252
[3]: rust-lang/cargo#11409

* rust-toolchain: Bump toolchain version to 1.70.0

which, compared to the previous 1.69.0, as the following impacts on
`zellij`:

1. [Enable sparse registry checkout for crates.io by default][1]

This drastically increases the time to first build on a fresh rust
installation/a rust installation with a clean cargo registry cache.
Previously it took about 75s to populate the deps/cache (with `cargo
fetch --locked` and ~100 MBit/s network), whereas now the same process
takes ~10 s.

2. [The `OnceCell` type is now part of std][2]

In theory, this would allow us to cut a dependency from `zellij-utils`,
but the `once_cell` crate is pulled in by another 16 deps, so there's no
point in attempting it right now.

Build times and binary sizes are unaffected by this change compared to
the previous 1.69.0 toolchain.

[1]: rust-lang/cargo#11791
[2]: https://doc.rust-lang.org/stable/std/cell/struct.OnceCell.html

* rust-toolchain: Bump toolchain version to 1.75.0

which, compared to the previous 1.70.0, has the following impacts on
`zellij`:

1. [cross-crate inlining][8]

This should increase application performance, as functions can now be
inlined across crates.

2. [`async fn` in traits][9]

This would allow us to drop the `async_trait` dependency, but it is
currently still required by 3 other dependencies.

Build time in debug mode (on my own PC) is cut down from 256s to 189s
(for a clean build). Build time in release mode is cut down from 473s to
391s (for a clean build). Binary sizes only change minimally (825 MB ->
807 MB in debug, 29 MB -> 30 MB in release).

[8]: rust-lang/rust#116505
[9]: rust-lang/rust#115822

* chore: Apply rustfmt.

* CHANGELOG: Add PR zellij-org#3039.

* feat(plugins): introduce 'pipes', allowing users to pipe data to and control plugins from the command line (zellij-org#3066)

* prototype - working with message from the cli

* prototype - pipe from the CLI to plugins

* prototype - pipe from the CLI to plugins and back again

* prototype - working with better cli interface

* prototype - working after removing unused stuff

* prototype - working with launching plugin if it is not launched, also fixed event ordering

* refactor: change message to cli-message

* prototype - allow plugins to send messages to each other

* fix: allow cli messages to send plugin parameters (and implement backpressure)

* fix: use input_pipe_id to identify cli pipes instead of their message name

* fix: come cleanups and add skip_cache parameter

* fix: pipe/client-server communication robustness

* fix: leaking messages between plugins while loading

* feat: allow plugins to specify how a new plugin instance is launched when sending messages

* fix: add permissions

* refactor: adjust cli api

* fix: improve cli plugin loading error messages

* docs: cli pipe

* fix: take plugin configuration into account when messaging between plugins

* refactor: pipe message protobuf interface

* refactor: update(event) -> pipe

* refactor - rename CliMessage to CliPipe

* fix: add is_private to pipes and change some naming

* refactor - cli client

* refactor: various cleanups

* style(fmt): rustfmt

* fix(pipes): backpressure across multiple plugins

* style: some cleanups

* style(fmt): rustfmt

* style: fix merge conflict mistake

* style(wording): clarify pipe permission

* docs(changelog): introduce pipes

* xtask: Disable pusing during publish (zellij-org#3040)

* xtask: Add `--no-push` flag to `publish`

which can be used when simulating releases to work without a writable
git fork of the zellij code.

* xtask: Fix borrow issues

* xtask/pipe: Require lockfile in publish

to avoid errors from invalid dependency versions.

* CHANGELOG: Add PR zellij-org#3040.

* fix(terminal): some real/saved cursor bugs during resize (zellij-org#3032)

* refactor: Simplify transfer_rows_from_viewport_to_lines_above

next_lines is always consolidated to a single Row, which immediately
gets removed - we can remove some dead code as a result

* perf: Batch remove rows from the viewport for performance

Given a 1MB line catted into the terminal, a toggle-fullscreen +
toggle-fullscreen + close-pane + `run true` goes from ~9s to ~3s

* perf: Optimize Row::drain_until by splitting chars in one step

Given a 10MB line catted into the terminal, a toggle-fullscreen +
toggle-fullscreen + close-pane + `run true` goes from ~23s to ~20s

* refactor: Simplify `if let` into a `.map`

* refactor: There are only new saved coordinates when there were old ones

* refactor: Unify viewport transfer: use common variable names

* fix: Use same saved cursor logic in height resize as width

See zellij-org#2182 for original introduction that only added it in one branch,
this fixes an issue where the saved cursor was incorrectly reset when
the real cursor was

* fix: Correct saved+real cursor calculations when reflowing long lines

* fix: Don't create canonical lines if cursor ends on EOL after resize

Previously if a 20 character line were split into two 10 character
lines, the cursor would be placed on the line after the two lines.
New characters would then be treated as a new canonical line. This
commit fixes this by biasing cursors to the end of the previous line.

* fix: for cursor index calculation in lines that are already wrapped

* chore: test for real/saved cursor position being handled separately

* chore: Apply cargo format

* chore(repo): update issue templates

* Bump rust version to 1.75.0 (zellij-org#3039)

* rust-toolchain: Bump toolchain version to 1.69.0

which, compared to the previous 1.67.0, has the following impacts on
`zellij`:

- [Turn off debuginfo for build deps][2]: Increases build time (on my
  machine) from ~230 s in 1.67.0 to ~250 s now, *which is unexpected*

This version also changes [handling of the `default-features` flag][3]
when specifying dependencies in `Cargo.toml`. If a dependent crate
requires `default-features = true` on a crate that is required as
`default-features = false` further up the dependency tree, the `true`
setting "wins". We only specify `default-features = false` for three
crates total:

- `names`: This is used only by us
- `surf`: This is used only by us
- `vte`: This is also required by `strip-ansi-escapes`, but that has
  `default-features = false` as well

How this affects our transitive dependencies is unknown at this point.

[2]: rust-lang/cargo#11252
[3]: rust-lang/cargo#11409

* rust-toolchain: Bump toolchain version to 1.70.0

which, compared to the previous 1.69.0, as the following impacts on
`zellij`:

1. [Enable sparse registry checkout for crates.io by default][1]

This drastically increases the time to first build on a fresh rust
installation/a rust installation with a clean cargo registry cache.
Previously it took about 75s to populate the deps/cache (with `cargo
fetch --locked` and ~100 MBit/s network), whereas now the same process
takes ~10 s.

2. [The `OnceCell` type is now part of std][2]

In theory, this would allow us to cut a dependency from `zellij-utils`,
but the `once_cell` crate is pulled in by another 16 deps, so there's no
point in attempting it right now.

Build times and binary sizes are unaffected by this change compared to
the previous 1.69.0 toolchain.

[1]: rust-lang/cargo#11791
[2]: https://doc.rust-lang.org/stable/std/cell/struct.OnceCell.html

* rust-toolchain: Bump toolchain version to 1.75.0

which, compared to the previous 1.70.0, has the following impacts on
`zellij`:

1. [cross-crate inlining][8]

This should increase application performance, as functions can now be
inlined across crates.

2. [`async fn` in traits][9]

This would allow us to drop the `async_trait` dependency, but it is
currently still required by 3 other dependencies.

Build time in debug mode (on my own PC) is cut down from 256s to 189s
(for a clean build). Build time in release mode is cut down from 473s to
391s (for a clean build). Binary sizes only change minimally (825 MB ->
807 MB in debug, 29 MB -> 30 MB in release).

[8]: rust-lang/rust#116505
[9]: rust-lang/rust#115822

* chore: Apply rustfmt.

* CHANGELOG: Add PR zellij-org#3039.

* feat(plugins): introduce 'pipes', allowing users to pipe data to and control plugins from the command line (zellij-org#3066)

* prototype - working with message from the cli

* prototype - pipe from the CLI to plugins

* prototype - pipe from the CLI to plugins and back again

* prototype - working with better cli interface

* prototype - working after removing unused stuff

* prototype - working with launching plugin if it is not launched, also fixed event ordering

* refactor: change message to cli-message

* prototype - allow plugins to send messages to each other

* fix: allow cli messages to send plugin parameters (and implement backpressure)

* fix: use input_pipe_id to identify cli pipes instead of their message name

* fix: come cleanups and add skip_cache parameter

* fix: pipe/client-server communication robustness

* fix: leaking messages between plugins while loading

* feat: allow plugins to specify how a new plugin instance is launched when sending messages

* fix: add permissions

* refactor: adjust cli api

* fix: improve cli plugin loading error messages

* docs: cli pipe

* fix: take plugin configuration into account when messaging between plugins

* refactor: pipe message protobuf interface

* refactor: update(event) -> pipe

* refactor - rename CliMessage to CliPipe

* fix: add is_private to pipes and change some naming

* refactor - cli client

* refactor: various cleanups

* style(fmt): rustfmt

* fix(pipes): backpressure across multiple plugins

* style: some cleanups

* style(fmt): rustfmt

* style: fix merge conflict mistake

* style(wording): clarify pipe permission

* docs(changelog): introduce pipes

* fix: add some robustness and future proofing

* fix e2e tests

---------

Co-authored-by: Aram Drevekenin <aram@poor.dev>
Co-authored-by: har7an <99636919+har7an@users.noreply.github.com>

* fix integer overflow again (oops)

---------

Co-authored-by: Aram Drevekenin <aram@poor.dev>
Co-authored-by: har7an <99636919+har7an@users.noreply.github.com>
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

Successfully merging this pull request may close these issues.

1 participant