MultiFlowTest
With the right flow rate, your top and bottom layers should look great. The small circle must be also visible.
This test will creates 11 parts with a specific Flow rates already associated with the part.
- Flow Test 110%
- Flow Test 108%
- Flow Test 106%
- Flow Test 104%
- Flow Test 102%
- Flow Test 100%
- Flow Test 98%
- Flow Test 96%
- Flow Test 94%
- Flow Test 92%
- Flow Test 90%
- Nozzle Size : 0.4
- Layer Height : 0.2
- Initial Layer Height : 0.2
- Line Width : 0.4
- Wall Line Count : 2
- Top/Bottom Thickness : 0.8 mm
Printing Time = 45mn
Print the tests parts if you don't want to print every part you can remove the part with the flow rates you don't want. After the print is finished, check the quality of your top and bottom layers. Use the flow rate of best part for your print.
Use the automatic reorder function to arrange every parts on the build plate (CTRL+R).
Print the test part and choose the flow with the best result :
On this test a flow at 90% looks like the best result :
