This library contains functionality
- to control up to 16 servos with speed control
- to control up to 6 stepper motors with accelerating and decelerating
- to softly turn leds on and off ( bulb simulation )
- to implement time functions without use of delay().
- to debounce and evaluate up to 32 buttons/switches (per instance)
Released versions can be installed by means of the library manager in arduino IDE
- AVR - ATmega328P ATmega2560, ATmega4809
- AVR ATtiny, if it has the 16-bit timer 1 and a SPI or USI hardware
- Renesas RA4M1 ( UNO R4 )
- STM32F103x processors ( the core of Roger Clark must be used )
- ESP32 ( core versions 2.x and 3.x )
- ESP8266 ( with some restrictions, Stepper via SPI does not work )
A documentation file in german and english is provided.
Latest changes:
| Version | Release Date | Description |
|---|---|---|
| 2.6.2 | 2024-09-05 | support V3.x of ESP32 core ( V2.x is still supported too ) |
| fixed endless rotating when moveTo is called very frequently in quick sequence (issue #34 on github ) | ||
| 2.6.1 | 2023-12-17 | bugfix with UNO R4Wifi and steppers (with Wifi active) |
| 2 more examples: | ||
| + 20 buttons in a matrix via I2C IO expander PCF8575 | ||
| + controlling a stepper via browser on UNO R4WiFi | ||
| 2.6.0 | 2023-12-02 | several bugfixes and internal enhancements |
| UNO R4 and UNO Rev4 Wifi are supported ( Renesas R7FA4M1AB3CFM#AA0 Processor ) | ||
| stepper.read can return the angle in fractions ( e.g. 1/10° ) | ||
| 2.5.1 | 2023-10-27 | Bugfix with setSpeedSteps(0) |
| Fix bug when setting stepper speed to 0 multiple times. The stepper stopped immediately when setting speed to 0 again while the stepper was ramping down | ||
| Fix some minor bugs with stepper enable - especially whe setting low delay times | ||
| 2.5.0 | 2023-09-12 | several bugfixes |
| ESP32 2.x package is supported ( ESP32S2, ESP32S3, ESP32C3 are not! ) | ||
| ATmega4809 is supported ( Nano Every, UNO WiFi Rev2 ( | ||
| .setSpeedSteps(0) is allowed now and stops the stepper without loosing the target position | ||
| .getSpeedSteps() indicates direction of movement ( negative values means moving backwards ) | ||
| .attachEnable( int delayTime ) allows disabling of 4-pin steppers (FULLSTEP/HALFSTEP) without extra enable pin | ||
| some additional stepper/servo examples | ||
| 2.4.3 | 2022-04-28 | small bugfix to suppress warnings (issue #10 ) |
| bugfix for setZero(position) for steppers in FULLSTEP mode | ||
| bugfix with AccelStepper like method names ( compiler error if both libs have been included ) | ||
| 2 additional timer examples commented in english | ||
| 1 additional stepper example | ||
| 2.4.2 | 2021-12-23 | fix bug in MoToStepper.setSpeedSteps ( was possible divide by zero ) |
| ESP crashed | ||
| 2.4.1 | 2021-11-12 | fix typo: arduino.h -> Arduino.h ( created an error on linux ) |
| fix bug and minor enhancements in MoToButtons.h | ||
| fix some documentation errors | ||
| Unfortunately the german documentation is missing in this release. You can download it directly here from GitHub | ||
| 2.4.0 | 2021-05-28 | ESP32 processor is now supported |
| ATTiny processors that have timer 1 (16-bit) and SPI or USI hadware are supported | ||
| some optimizing for 32-Bit processors, which leads to significant faster steprates for ESP32 and STM32 | ||
| ESP32 creates servopulses by hardware ( they are much more stable ) | ||
| 2.3.1 | 2020-11-07 | fix error in doSteps: motor did not stop with doSteps(0) and no ramp |
| 2.3.0 | 2020-07-31 | MoToButtons: The longpress event is already triggered when the time for longpress expires, not when the button is released |
| New class MoToTimebase to create a trigger in regular intervals | ||
| When setting the zero point, steps per rotation can be changed also. | ||
| fix error in rotate(0) - did not stop under special circumstances | ||
| 2.2.0 | 2020-02-23 | MoToButtons: new method 'clicked' to recognize single and double clicks. |
| MoToButtons: if all buttons/switches are simply connected to input pins, MoToButtons can read them alone without a callback function. | ||
| 2.1.1 | 2020-02-08 | Fix error in MoToServo: stopped working with more than one Servo |
| 2.1.0 | 2020-02-05 | new class 'MoToButtons' to manage multiple buttons and switches ( up to 32 in one instance ) |
| MoToTimer: new method 'expired', which returns a 'true' only with the first call after the timer has expired | ||
| 2.0.0 | 2020-01-13 | managing an enable pin for steppers is possible |
| new method 'getSpeedSteps' returns actual speed | ||
| ESP8266 is now supported ( with limitations regarding stepper mode: only step/dir is possible ) | ||
| classnames have changed ( the old names can still be used for compatibility, but should not be used in new sketches) |
Can control up to 16 servos. Compatible with arduino servo lib, but allows to control the speed of the servo.
A class to control stepper motors. The arduino sketch is not blocked while the stepper is moving. After setting a reference point, the stepper can be positioned absolutely just like a servo. But without the angle limitation of 0--180 degrees. V1.1: Ramps can be defined to accelerate/decelerate the Stepper.
Allows easy softon / softoff of leds. It works on all digital outputs.
Allows easy nonblocking timedelays in sketches. You don't have to bother with millis() directly
Manage up to 32 buttons and switches with debounce and event handling (pressed, released, short press, long press, click and double click ) in one instance. The buttons/switches can be read in via a user callback function. This enables matrix arrangements and e.g. I2C port expander to be used.
Apart from class MoToButtons, there is no special function that has to be called in the loop frequently. You can even use the delay() function in the loop while servos and steppers are moving.
The library uses Timer1 for all classes (AVR). V1.0: from this version on, timer 3 is used instead of timer 1 if available. On the STM32F1 platform, timer 4 is used. MoToButtons and MoToTimer do not use any timer und should be compatible with all plattforms.
With ESP8266 waveform creating fuctions, and IO-interrupts are used. Because the core functions could not be used for this purpose, the integrated functions tone(), analogWrite() and servo() cannot be used together with MobaTools. To overcome this problem, there exists an additional class exclusively for the ESP8266 platform:
Contains Methods to create pwm and tone outputs.
